Author Topic: Hello and new 45-60 on the way (Read 29494 times)

Pitchy · « **Reply #20 on:** April 17, 2012, 07:32:09 AM »

No one must likes videos, won`t post any more.

Good thing is my new gun is in today, i`ll post a report without video.

Pitchy · « **Reply #21 on:** April 17, 2012, 05:04:31 PM »

Boys i tell ya i`m real impressed with this rifle, fit and finish is perfect, the wood is walnut with a dark satan finish.
After messing around trimming a handfull of 45-70 cases to work i shot it a few times at 30 yards, last shot was dead center in a two inch circle.
I`ll post a better range report in a day or two.
Had to thin the rims two .62 to work in this gun, might be a guy that has some factory ammo for it, going to check on that.

Rowdy Fulcher · « **Reply #22 on:** April 17, 2012, 05:43:03 PM »

Pitchy
Is that a Chaparral ? Very nice looking Rifle . The stocks look great . Congratulations on your new Rifle .

Advertising · « **Reply #23 on:** **Today** at 05:53:03 PM »

Pitchy · « **Reply #23 on:** April 17, 2012, 06:00:06 PM »

Thanks.
Yepper, just got it today.

Pitchy · « **Reply #24 on:** April 17, 2012, 06:17:32 PM »

Having a little trouble with loading, i`m using a 292 grain bullet, lyman mold number 457191 and crimping in top groove.
I trimmed the case to 1.81 but that makes the overall length to long.
I`m going to have to trim the cases to 1.75 to make the OAL right at 2.25.
Will shortening the case that much raise pressures too much?
The loads i shot today were 35 grains of 3031.

Roosterman · « **Reply #25 on:** April 17, 2012, 07:44:11 PM »

I shot a 2 1/2" group @ 100 yards with mine with a 300gr bullit and 34gr of 3031 with stock sights. Better sights would be amazing!
Nice gun Pitchy.

Pitchy · « **Reply #26 on:** April 17, 2012, 07:50:27 PM »

Say that`s good shootin.
I may have to drop back to 34 grains, do ya know what fps is with that load.

Pitchy · « **Reply #27 on:** April 17, 2012, 08:31:24 PM »

If anyone can help i`m a little cunfused about if it hurts anything to have air space between bullet and powder using smokless.
I took some new factory loaded 35 Rem ammo and can shake them and feel the poder moving inside, have found that with other ammo in the past.
I need to know the facts before i load any more ammo for this new 45-60, i loaded some today at 35 grains of 3031 and there is aprox 1/4 in. of air space.
I shot five of them so far with no issues, i used no fillers or anything else.

Pitchy · « **Reply #28 on:** April 18, 2012, 07:01:16 AM »

Well no one can help huh, i know there`s people here that know all about this matter so must be the newbie treatment.
If that`s the case ,no thanks.

Roosterman · « **Reply #29 on:** April 18, 2012, 07:17:06 AM »

Sorry, I don't keep the computer attached to my hip.

Yes, there will be air space with that load. There is air space in mine also, perfectly normal.

Pitchy · « **Reply #30 on:** April 18, 2012, 10:50:13 AM »

Quote from: Roosterman on April 18, 2012, 07:17:06 AM

Sorry, I don't keep the computer attached to my hip. Yes, there will be air space with that load. There is air space in mine also, perfectly normal.

Wasn`t just talking about you pard, thank you sir.

Just came in from turning 50 cases, made a jig for the lathe so i could turn the rims exact and the same on each shell.
Getting there.

Pitchy · « **Reply #31 on:** April 18, 2012, 01:58:46 PM »

Trimmed up 50 cases from 45-70`s, painted the ends to keep them separated.

Pitchy · « **Reply #32 on:** April 18, 2012, 06:51:44 PM »

Quote from: Roosterman on April 17, 2012, 07:44:11 PM

I shot a 2 1/2" group @ 100 yards with mine with a 300gr bullit and 34gr of 3031 with stock sights. Better sights would be amazing!
Nice gun Pitchy.

I tried that load today but haven`t gave it a good test yet, shot a few at 50 yards and the recoil is mild and plesant to shoot.
Don`t know about 100 yards, not much adjustment on the sight for 100 yards and under.
Will set up a target tomorrow and see whats what.

Pitchy · « **Reply #33 on:** April 19, 2012, 01:04:18 PM »

Well not real impressed with the turn out but my eyes are so bad that it`s hard to focus on that rear sight.
The 50 yard groups are with the ladder down of coarse.
Tried three shots at 100 with the sight down and it shot way low so tried one shot with the elevator down as far as it would go and it shot way high.
So i filed a u shaped groove in the bottom of the ladder and that shot good as far as elevation.
Probably going to try a different powder as i`m out of 3031 anyway.

Pitchy · « **Reply #34 on:** April 19, 2012, 03:57:55 PM »

A little better, 55 grains of FF Goex but room for improvement. 50yards
Between the rear sight and bad eyes it will kill deer as is.

Pitchy · « **Reply #35 on:** April 20, 2012, 12:21:35 PM »

Bingo.

Roosterman · « **Reply #36 on:** April 20, 2012, 04:00:36 PM »

Good for you, my magic was 34gr.....they all like something different. When you going to shoot real BP?

Pitchy · « **Reply #37 on:** April 20, 2012, 04:20:36 PM »

I shot some of that nasty stinky black yesterday, didn`t group worth a hill of beans.
I have eight muzzleloaders to shoot if i want to clean rifles every time i shoot, no thanks.
If that lights peoples board by all means shoot it and have fun.
Must be true there`s a sweet spot with 3031, though i have to shoot it some more to make sure those last two shots wern`t luck.

Roosterman · « **Reply #38 on:** April 20, 2012, 05:08:37 PM »

You go by Pitchy on any muzzleloading boards?

Pitchy · « **Reply #39 on:** April 20, 2012, 05:31:44 PM »

Used to hang on a couple but got tired of clickish attitudes and BS so only hang at Hobies board now.

News:

Author Topic: Hello and new 45-60 on the way (Read 29494 times)

Advertising