My Belgian Centaure Serial # is 2865.
I bought it about 1966 or 1967.
It's a nice design, but not a faithful reproduction of the Colt.
Mine has always had a problem with chainfires. Twice, all six at once.
When it does that, it ejects the wedge and blows the loading lever latch receiver off to parts unknown. Also loosens the arbor.
I'm currently repairing it, but also converting to .45 acp with a Kirst Converter.
Biggist two issues are:
1) that the latch receiver is larger than any replacement on the market, so I'll need to weld up my barrel dovetail and cut a new dovetail to fit the Uberti.
2) the bolt width in the Uberti is 5% wider than the Centaure bolt, so the Kirst bolt slots are too wide, resulting in sloppy lockup. Solution to that is to scratch build a wider bolt if the Uberti won't fit.
Much to my surprise, timing is satisfactory.
Tightening up the loose arbor will be tedious, but is not difficult.