Author Topic: SUVCW (Read 6447 times)

Gen Lew Wallace · « **on:** October 23, 2012, 08:31:35 AM »

I received my acceptance letter from the SUVCW yesterday. It's a good feeling to honor my ancestor.

Pitspitr · « **Reply #1 on:** October 23, 2012, 10:52:34 AM »

Welcome Brother!

I used to wear my SUVCW membership medal on my GAF uniform, but being limited to the number of medals one can wear, it has been replaced by the medals I've won at the various musters.

Gen Lew Wallace · « **Reply #2 on:** October 24, 2012, 06:31:26 AM »

Thank you Col. Sounds like you've got a real problem there hehe.

Congratulations on all the awards!

I ammassed a fair sized medal rack by the time I retired from the military. I used to tease the young guys that they could one day walk with a lean to the left like I did if they were as good as me.

I was thinking of getting the SUVCW war medal for my frock coat. Haven't decided yet. I have a shell jacket too, so I suppose I could get a GAF medal too. Decisions, decisions.

Advertising · « **Reply #3 on:** **Today** at 03:44:58 AM »

Pitspitr · « **Reply #3 on:** October 24, 2012, 08:23:12 PM »

They do look really nice together.

G.W. Strong · « **Reply #4 on:** October 24, 2012, 10:09:23 PM »

Where'd you get all the GAF reglalia?

Pitspitr · « **Reply #5 on:** October 25, 2012, 06:13:00 AM »

I don't remember Who the supplier was for the GAF belt Plate, but I bought the last one and it didn't sound like they were going to produce any more. I'm working with Prairie Flower Leather Company to produce some belt buckles and we might have some of them by next year. The collar tabs, hat wreath and membership medals are produced by Prairie Flower Leather Company. I currently have a good supply of them. Thank you for asking, that reminds me that I need to make a post offering them for sale.

Steel Horse Bailey · « **Reply #6 on:** November 20, 2012, 11:49:04 PM »

I'm not 100% sure, but Trailrider used to have them, IIRC.

Alas, I can't find his website, but perhaps he'll chime in here.

Hill Beachy · « **Reply #7 on:** November 25, 2012, 11:06:30 AM »

Quote from: Steel Horse Bailey on November 20, 2012, 11:49:04 PM

I'm not 100% sure, but Trailrider used to have them, IIRC.

Alas, I can't find his website, but perhaps he'll chime in here.

Here is his website There are some belt buckles listed, but I do not see the GAF one.

http://www.gunfighter.com/trailrider/tr_belts-buckles.html

Texas Lawdog · « **Reply #8 on:** November 25, 2012, 11:37:43 AM »

I have located a Sons of Confederate Veterans Chapter in Arlington. I am trying to get an application to join. Both of GGrandfathers on my mother's side were in the Confederate Army. I have a G Uncle that was in the Union Cavalry, Before, During, and After the Civil War.

River City John · « **Reply #9 on:** November 25, 2012, 04:12:32 PM »

http://www.hanoverbrass.com

Hanover Brass made my Confederate Navy belt with 2-piece buckle. They are the best I've found for buckles, and are very pleasant to work with. They do custom work.

RCJ

Steel Horse Bailey · « **Reply #10 on:** November 25, 2012, 05:59:01 PM »

Back to Trailrider: Give him a call, but he may not be able to get the GAF buckles any more. Or he CAN! Call and you'll know.

303-791-6068

Trailrider · « **Reply #11 on:** November 25, 2012, 10:53:58 PM »

Gentlemen:
I have the honor to reply to yours of today, concerning the GAF Belt Plate. Tim Parsley at parsleysbrass.com made the original run. I believe he can still make them for you. I'd recommend contacting him directly. I'm out of stock, and haven't ordered any more due to lack of demand for the belts with the plate attached. It just doesn't pay for me to sell them separately, as you'd be paying postage from Tim to me and back to you, and I'd have to charge that. The GAF plates (assuming Tim still makes them) will fit the 1-7/8" waist or saber belts, but because the hasp ends are fitted to the individual plate, if you want to interchange the GAF belt plate with, say the M1851 Enlisted Plate (applied silver wreath), the hasp end of the belt would be fitted with screw posts instead of rivets, and the stitching normally done in addition to the copper rivets must be omitted.

(Note: Because of the late date, I can't promise delivery of my custom leather by Christmas.)

HAPPY HOLIDAYS TO ALL!

Your obedient servant,

G.W. Strong · « **Reply #12 on:** November 26, 2012, 07:43:16 PM »

Quote from: Trailrider on November 25, 2012, 10:53:58 PM

the hasp end of the belt would be fitted with screw posts instead of rivets, and the stitching normally done in addition to the copper rivets must be omitted.

You could do the 3 rows of stitching through the outer layer only to give the impression of the stitching lines.

Trailrider · « **Reply #13 on:** November 27, 2012, 10:03:09 AM »

Very true. And I have done several both with and without, depending on the customer's preferance.

Gen Lew Wallace · « **Reply #14 on:** December 08, 2012, 10:40:25 PM »

Found this at an antiques show today. Measures around 56 inches point to point.

1961MJS · « **Reply #15 on:** December 08, 2012, 11:44:15 PM »

Hi

My Great-Great-Grandfather Pressley B. Dunbar fought in the Kentucky Mounted Infantry all of 1864. I'm considering joining the Sons of Union Veterans, BUTTTTT there doesn't seem to be an Oklahoma Department. I don't really want to join an organization and suddenly become the state president or something.

What does the SUVCW do?

Later

Mike
Norman OK

Gen Lew Wallace · « **Reply #16 on:** December 09, 2012, 03:50:11 PM »

You could join as an at-large member. Don't worry, they won't try to make you a state commander. Take a look around the website and find out some of the things that go on. It's the Congressionally chartered group to carry on the GAR. They work to honor our ancestors and the battles they fought and battlegrounds they fought upon.

Gen Lew Wallace · « **Reply #17 on:** February 05, 2013, 01:35:18 PM »

I received my War Medal from the quartermaster. Members of SUVCW who have served and earned a wartime campaign medal are eligible. I haven't decided whether to put it on my shell jacket or frock coat. Perhaps I will rotate. Either way, I am pleased with it.

Gen Lew Wallace · « **Reply #18 on:** February 21, 2013, 09:56:49 AM »

Found another goodie on ebay. I think this will go on my frock coat.

Steel Horse Bailey · « **Reply #19 on:** February 21, 2013, 11:01:47 AM »

VERY cool, General!

News:

Author Topic: SUVCW (Read 6447 times)

Advertising

1961MJS