Kirst ejector rod

Started by law dawg, March 20, 2006, 09:28:57 PM

Previous topic - Next topic

law dawg

I was visiting the kirst website and was provided a link to River Junction I believe it was called.  Anyway they sell the whole set up and I'm looking at the ejector rod and in the instructions it says to cut a notch in the ram rod to secure the flag of the ejector.  Are you suppose to cut the notch in the top so the flag will be between the barrel and ram rod or do you cut the notch in the web of the rammer?  And why do you need to notch at all, is the ejector rod not a captive unit?  If it isn't I'm assuming it just slides in and out of the tube at will.

Scattered Thumbs

The notch is cut on the top. Flag is between the barrel and ram rod. The ejector is not spring mounted like the Colt, it's the flag in the notch that keeps it from moving when not in use.

Yankee John

Here is a pic of the slot that I filed in the loading lever of my Remington Kirst Konversion.  Took all of about 10 minutes with a regular metal file,  then a dab of cold blue- Looks factory!

Hope this helps!
John

Halfway Creek Charlie

Here is a shot of my two Euroarms '56 Remmy' Conversions. Kirst 44 Rem. the top pistol is newer, late production, but I cannot tell exactly what year as it has been defarbed.
the lower pistol is a 1973! both were unfired new condition with factory grease in the internals and cylinder. The older pistol has the Kirst Hand fitted Pietta conversion in it. and the newer one on top has the new Gated Kirst Uberti conversion in it. Both conversion cylinders and recoil shields swap out to either pistol and my Uberti Carbine.

This shows the flip side of what John'sejector rod looks like.
SAS-76873
NCOWS-2955
SCORRS
STORM-243
WARTHOG

Shooting History (original), Remy NMA Conversions, 1863 New Model Pocket Model C.F. Conversion, Remy Model 1889 12Ga. Coach Gun
2nd. Gen. "C" Series Colt 1851 Navies
Centennial Arms/Centaur 1860 Armies
1860 Civilian Henry 45LC (soon to be 44 Henry Flat C.F.(Uberti)
Remingon Creedmore Rolling Block 45-70 (Pedersoli)

"Cut his ears off and send them to that Marshall in Sheridan" Prentice Ritter

Artificial Intelligence is no match for Natural Stupidity
.

law dawg

For another question.  When you drop the loading lever to use the ejector on colt models you usually end up pointing the gund almost straight up and down what keeps the ram rod from entering the cylinder and causing problems during the emptying process?  Do you drop the loading lever turn the flag outward then close the loading lever before ejecting or just leave the lever open?

Halfway Creek Charlie

At the unloading station I lay the gun on it's side like the picture, then release the lever, turn the flag to this side 1/2 cock ick up the back of the gun so I can rotate the cylinder with my left hand whild using the ejector rod with my right hand, muzzle resting on the stand. I shoot 44 Rem. which  uses 44 Colt brass. I have yet to have one stick in the cylinder. after a few stages they get a little sticky, but not enough to have to really haul down on the ejector rod. It is easier to do than to tell about and it gets easier with every cylinder shot. I chose the 44 Rem because it is a full six shot cylinder, not 5 and a saftey slot. So I can choose which to leave empty (or Not).
I lube all moving parts with olive oi. and I use bore butter or a lube made by a friend. seems to work very well.
SAS-76873
NCOWS-2955
SCORRS
STORM-243
WARTHOG

Shooting History (original), Remy NMA Conversions, 1863 New Model Pocket Model C.F. Conversion, Remy Model 1889 12Ga. Coach Gun
2nd. Gen. "C" Series Colt 1851 Navies
Centennial Arms/Centaur 1860 Armies
1860 Civilian Henry 45LC (soon to be 44 Henry Flat C.F.(Uberti)
Remingon Creedmore Rolling Block 45-70 (Pedersoli)

"Cut his ears off and send them to that Marshall in Sheridan" Prentice Ritter

Artificial Intelligence is no match for Natural Stupidity
.

law dawg


Scattered Thumbs

Quote from: law dawg on March 22, 2006, 08:44:08 AM
For another question.  When you drop the loading lever to use the ejector on colt models you usually end up pointing the gund almost straight up and down what keeps the ram rod from entering the cylinder and causing problems during the emptying process?  Do you drop the loading lever turn the flag outward then close the loading lever before ejecting or just leave the lever open?

You better close the loading lever.
Originally you couldn't unload a Colt pointing up as you do today. Cartridges were made of copper and you were shooting a fairly large load of blackpowder, cartridges would stick bad to the chambers. You would unload a Colt by holding the frame with your right hand, put the grip against your belly, grab firmly the bullseye type flag on the ejector rod(ever wonder why it was so big in the blackpowder frames? ;D ) with your index finger and your thumb and pull hard, then rotate the cylinder with the left hand and start again for the next chamber. ;D No wonder reports on Little Big Horn state that the troopers threw away their empty revolvers.

sundance44`s

They threw their colts away ! the guns that won the west !  ;D
Remington Americas Oldest GunMaker

You boys gonna pull those pistols or whistle Dixie

Scattered Thumbs

Quote from: sundance44`s on March 24, 2006, 08:49:06 AM
They threw their colts away ! the guns that won the west !  ;D

Guns won the West in Hollywood only. ;D
In real life it was people who won the West.

© 1995 - 2024 CAScity.com