It's not complex enough to warrant a video. Just pull the hammer back to half cock open the gate and put one cartridge in then turn the cylinder past one chamber and load the third hole. Then turn the cylinder to load the next three and close the gate pull the hammer to full cock and lower it to fully down. You can practice with empty cases and as long as you don't fiddle around you'll easily do it right in the dark on horse back at a lope. Any time the hammer is raised make a habit of making the full cycle to get it to the full down position. Turning the cylinder with your fingers is only done to load, unload, or inspecting the pistol. Others may want to polish these words but I think that covers it.