Author Topic: Uberti 1873 Lever Action safety question  (Read 12281 times)

Offline Harley Starr

  • Top Active Citizen
  • *
  • Posts: 967
  • Liked:
  • Likes Given: 0
Uberti 1873 Lever Action safety question
« on: January 10, 2010, 12:35:17 PM »
Once when I asked to see a Uberti 1873 rifle, I noticed that I needed to hold the lever against the stock to engage the trigger. Once again I found myself dumbstruck, not to mention alittle turned off, by the safety features required for imported firearms. But since I have been eyeballing the Cimarron variety, I can't help but notice their attention to detail with the rifles.

Does the Cimarron 1873 also have this "safety quirk"?

P.S., Does this "safety quirk" exist on the Chiappa 1892 or the Rossi 1892?

Please excuse my use of the term "safety quirk".
A work in progress.

Offline shieldsmt

  • Very Active Citizen
  • *
  • Posts: 72
  • Liked:
  • Likes Given: 0
Re: Uberti 1873 Lever Action safety question
« Reply #1 on: January 10, 2010, 12:57:17 PM »
This "safety quirk" started in 1873 when Winchester first started building these great rifles!

Offline Delmonico

  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 23346
  • Liked:
  • Likes Given: 1
Re: Uberti 1873 Lever Action safety question
« Reply #2 on: January 10, 2010, 01:03:16 PM »
All the 1873 and later Winchester Levers have this fature, it makes sure the bolt is closed and locked so that when you fire the rifle, the bolt don't open and eject the empty and also the bolt.  If you think about it, that bolt is lined up with one of your own personal eyes.  Marlin uses a 2 piece firing pin to do the same thing.
Mongrel Historian


Always get the water for the coffee upstream from the herd.

Ab Ovo Usque ad Mala

The time has passed so quick, the years all run together now.

Advertising

  • Guest
Re: Uberti 1873 Lever Action safety question
« Reply #3 on: Today at 12:54:02 AM »

Offline Pettifogger

  • Top Active Citizen
  • *
  • Posts: 3613
  • Liked:
  • Likes Given: 20
Re: Uberti 1873 Lever Action safety question
« Reply #3 on: January 10, 2010, 05:09:05 PM »
All the 1873 and later Winchester Levers have this fature, it makes sure the bolt is closed and locked so that when you fire the rifle, the bolt don't open and eject the empty and also the bolt.  If you think about it, that bolt is lined up with one of your own personal eyes.  Marlin uses a 2 piece firing pin to do the same thing.

As noted, not a "safety quirk" but part of the design.  In addition to the two piece firing pin the Marlin also has the lever safety.  On the 73 virtually everyone that shoots these guns in competition puts in a reduced power safety spring as the stock safety feels like it came out of a truck.  Once lightened, you won't know its there but it still serves its function in help preventing an out of battery discharge.

Offline Jefro

  • Top Active Citizen
  • *
  • Posts: 726
  • know matter where you go, there you are
  • Liked:
  • Likes Given: 0
Re: Uberti 1873 Lever Action safety question
« Reply #4 on: January 10, 2010, 09:50:29 PM »
Howdy Ridgway, the lever safety is in all the 73s, prevents the gun from being fired out of battery. However when shooting the gun you never know it's there. The Cimarron 73 is an Uberti, as is Taylors and some others, they are the importers of Uberti. Use the "search'' feature a little and you will find Taylors highly recomended for customer service, and to stay away from the Chaparral 73. Good Luck.

Jefro
sass # 69420....JEDI GF #104.....NC Soot Lord....CFDA#1362
44-40 takes a back seat to no other caliber

Offline Harley Starr

  • Top Active Citizen
  • *
  • Posts: 967
  • Liked:
  • Likes Given: 0
Re: Uberti 1873 Lever Action safety question
« Reply #5 on: January 10, 2010, 10:32:17 PM »
Had no idea it went that far back. Oh well, I'll consider this the lesson for the day. It just occured to use the term
"safety feature", instead of that other terminology.
Couldn't think of the proper word at that moment.
Don't you just hate it when that happens?
A work in progress.

Offline Ricochet

  • Citizen
  • *
  • Posts: 3
  • Liked:
  • Likes Given: 0
Re: Uberti 1873 Lever Action safety question
« Reply #6 on: January 23, 2010, 09:57:34 AM »
You should find an adjustment screw that will lighten the safety

Offline Harley Starr

  • Top Active Citizen
  • *
  • Posts: 967
  • Liked:
  • Likes Given: 0
Re: Uberti 1873 Lever Action safety question
« Reply #7 on: January 24, 2010, 12:23:51 AM »
You should find an adjustment screw that will lighten the safety

Where can I purchase one of those?
A work in progress.

Offline Deadeye Dick

  • Top Active Citizen
  • *
  • Posts: 648
  • Deadeye & His Belle
  • Liked:
  • Likes Given: 1
Re: Uberti 1873 Lever Action safety question
« Reply #8 on: January 24, 2010, 10:15:17 AM »
The 73 Winchester does not have an adjustment screw to lighten the safety. You can purchase a lighter safety spring from "The Smith Shop" that will lighten the safety. http://www.thesmithshop.com/leversafety.html

Deadeye Dick
NRA LIFE, NCOWS #3270, BLACK POWDER WARTHOG, STORM #254,
  DIRTY RATS #411, HENRY #139, PM KEIZER LODGE #219  AF&AM

Offline Harley Starr

  • Top Active Citizen
  • *
  • Posts: 967
  • Liked:
  • Likes Given: 0
Re: Uberti 1873 Lever Action safety question
« Reply #9 on: January 24, 2010, 11:25:05 AM »
The 73 Winchester does not have an adjustment screw to lighten the safety. You can purchase a lighter safety spring from "The Smith Shop" that will lighten the safety. http://www.thesmithshop.com/leversafety.html

Deadeye Dick

Thanks Deadeye! ;)
A work in progress.

Offline Irish Dave

  • Retired Marshal
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 4775
  • Liked:
  • Likes Given: 2
Re: Uberti 1873 Lever Action safety question
« Reply #10 on: March 04, 2010, 10:32:22 AM »


Actually, it's not hard to make a lighter safety spring yourself with piano wire and a couple good pairs of needle- or round-nose pliers.
I have a couple that have homemade springs in them and they work just fine.

Just another thought.
Dave Scott aka Irish Dave
NCOWS Marshal Retired
NCOWS Senator and Member 132-L
Great Lakes Freight & Mining Co.
SASS 5857-L
NRA Life

irishdave5857@aol.com

Offline jplower

  • Citizen
  • *
  • Posts: 20
  • Liked:
  • Likes Given: 0
Re: Uberti 1873 Lever Action safety question
« Reply #11 on: April 01, 2010, 07:11:00 PM »
Be very careful when fiddling with the safety on a 73 or 66.  Some years ago, a shooter lost an eye because he removed the safety spring.  As he was levering up a round into the chamber, it was half way in when he somehow touched the trigger, causing the hammer to fall with enough force to strike the firing pin and explode the primer.  The unlocked action was blown back instantly, shearing the firing pin retainer and driving the pin through his right eye.  The need for speed here ended his shooting for some time, if not for all time.  Beware the light springs, they can fail on you.  Just remember that if they were such a great, safe idea in all cases, the maufactures would use them to save costs.  Same with piano wire springs.

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com