Recent Posts

Pages: 1 2 3 4 5 [6] 7 8 9 10
51
In a hurry!!!!!   :o

  Yep, I knew of your exploits with the Piettas and I've done a few Uberti's with different length barrels ( 19th century  Pistol Packs ya know). Anyway. I've not had different caliber '72's  here at the same time to get that "I otta try that" ding in my head. In fact I've got a pair in 45C visiting but no others.
  I'm glad you mentioned it though,  definitely worth looking into!!!

Thuther mike


I definitely know whoever sent you those 45 72s will be happy once they get them back.
52
Spencer Shooting Society / Re: Spencer Serial Number 50950
« Last post by glorietapass on May 23, 2024, 11:11:58 AM »
From Two Flints...."Very good chance your Spencer Carbine, serial # 50950, was issued to Company E, 7th Indiana Volunteer Cavalry on November 12, 1865." Grateful for the info, and this forum.  I don't have it in hands yet, but will post photos when I do. 

Meantime, while I'm here and we're talking Spencers.... a friend got me this Spencer Bullet (not put together) from Sailors Creek.  I can't help but conjure up such images of where and what regiment/division this bullet was from?  Sheridan, Custer, Merritt....Was it dropped in action, trying to reload that magazine...?  Too cool! 

Appreciate this fine forum and the Spencer Shooting Society. 
53
Frontier Iron / Re: Cimarron's new American model!
« Last post by U.S.M.R. on May 23, 2024, 10:54:08 AM »
MTM Look on the back of the cylinder. Mine has the year, catalog number, and .44 Colt stamped on it. For some reason they’re marked different than the .45s. .44 Americans are also in a different serial number range than the rest of the break tops for some reason.
54
NCOWS / Re: Starline 44-40 brass available at Midway USA
« Last post by Coffinmaker on May 23, 2024, 09:44:01 AM »

 ;D  One really nice thing about Starline 44-40 brass??  It makes really superb 45 Colt cartridges that seal rifle chambers really really well.
55

 :) My Good Perfesser  ;)

I would be some remiss were I knot to enquire - You have measured the chambers in the Hammered Stevens and the Antique Belgian Hammered Double??  :P I would be inclined to suspect both have Two and a Half inch chambers which do not necessarily act harmoniously with more common Two and Three Quarter ammunition.  :o In which case I would suspect also you are shootin Two and a Half Inch Roll Crimp fodder??  I hope  8)
56
The Leather Shop / Re: Stuck Chicago Screws
« Last post by Coffinmaker on May 23, 2024, 09:34:57 AM »

 :)  Abilene  ;)

Ah Ha!!  NONE OF THE ABOVE.  I have encountered the exact same problem.  I have and use a pair of flat Wire Stripping pliers.  Really thin by comparison, have serrations in the jaws and slip in between pieces of leather really well.  give 'em a try.
57
The Longbranch / Re: Lets pitch in and buy Founders
« Last post by Coffinmaker on May 23, 2024, 09:30:20 AM »

 :) OH MY OH MY  ;)

That "Karen Finishing Academy" is going to give me Knightmares for at least a week!!
58
The Leather Shop / Re: Stuck Chicago Screws
« Last post by St. George on May 23, 2024, 09:00:05 AM »
De nada - glad it worked out.

Might want to get a better pair - maybe the ones made by 'Sargent', with the wire-cutter - they come in handy.

Scouts Out!
59
Spencer Shooting Society / Re: Spencer Serial Number 50950
« Last post by El Supremo on May 23, 2024, 08:06:46 AM »
Hello, on this one:

If wish, please share what might be interesting to us chickens. Thanks.
Very respecfully, cluck, cluck.
El Supremo/Kevin Tinny
60
Tall Tales / Re: May we move on, for coffee and chat ?
« Last post by Silver Creek Slim on May 23, 2024, 07:18:16 AM »
Morning y'all.
Coffee and tea ready ready.

'Tis 52 and sunny. High of 76.

Slim
Pages: 1 2 3 4 5 [6] 7 8 9 10
SMF spam blocked by CleanTalk
© 1995 - 2023 CAScity.com