Author Topic: picture of my ruger old army (Read 14598 times)

knucklehead · « **on:** March 10, 2007, 02:17:46 PM »

Figured i would post a picture of my ruger old army with the conversion cylinder installed.
I also just finished the holster for the ruger old army(holster in the picture)
the grips are cocobolo.

mtmarfield · « **Reply #1 on:** March 10, 2007, 05:51:38 PM »

Greetings!

Wow! That's all class! Nice holster, too. What's the chambering?

Be Well!

M.T.Marfield:.
3-10-07

knucklehead · « **Reply #2 on:** March 10, 2007, 06:23:32 PM »

with the conversion cylinder its .45 long colt
with the cap and ball cylinder its .44 cal. ball diameter is .457

conversion cylinder is made by kirst.

Advertising · « **Reply #3 on:** **Today** at 03:16:54 PM »

RRio · « **Reply #3 on:** March 10, 2007, 06:50:40 PM »

Looks great, Knucklehead!!

oldwolf · « **Reply #4 on:** March 28, 2007, 08:51:58 PM »

Very sweet. Can you load the 45LC to Blackhawk pressures in the ROA or do you stick to industry standard pressure for the 45LC?

Schofield · « **Reply #5 on:** August 10, 2007, 10:55:55 AM »

Not familiar with Rugers, but it sure looks great! Is this the model KBP-7F? Thanks

Ten Wolves Fiveshooter · « **Reply #6 on:** August 10, 2007, 11:21:56 PM »

Knuckelhead, nice looking piece, and the holster looks great , the diamones add a nice touch, I do my own leather work too, and I appreciate a nice piece of work like this.

TEN WOLVES FIVE SHOOTER

oscar · « **Reply #7 on:** August 22, 2007, 09:14:38 PM »

I would love to own a pistol like this. I am a green horn and like to shoot but don't know too much about all the numbers and letters of models and this and that, you guys spout off. Gun shops are pretty intimidating when you go in. Got suggestions. Where I live I have many gun shop options to choose from.

i have a Ruger 9mm model P89DC I want to keep it but the formed handle is kinda big for my hand. I have a 10/22 short barrel, don't know what else to call that and a tricked out savage 10 for getting varmints to hell in a hurry. If I did buy a new what you call a vicarro I would try to get handle that were small. Sounds like you did alot of conversion was it allot? I have no clue. I post over at the cosies corner as I cook chuckwagon style as a cosie several times a year and camp with a dutch oven almost every time we go out and that is allot in the spring summer and fall.

oldwolf · « **Reply #8 on:** September 05, 2007, 08:56:46 AM »

I didn't know you could get the conversion cylinders with a loading gate. What make is the cylinder?

Cimarron Lawman · « **Reply #9 on:** October 08, 2007, 02:32:15 PM »

Kirst.

oldwolf · « **Reply #10 on:** October 08, 2007, 08:32:11 PM »

Hmmm...it isn't obvious in the pictures or their website.

Ten Wolves Fiveshooter · « **Reply #11 on:** October 08, 2007, 09:18:36 PM »

Howdy Oldwolf

That's a right nice looking piece, if I do say so, my ownself
Thanks for sharing

Ten Wolves Five Shooter

oldwolf · « **Reply #12 on:** October 09, 2007, 09:22:06 AM »

Quote from: Ten Wolves Fiveshooter on October 08, 2007, 09:18:36 PM

Howdy Oldwolf

That's a right nice looking piece, if I do say so, my ownself
Thanks for sharing

Ten Wolves Five Shooter

Hey Ten Wolves - Those are pictures I linked to from the Kirst website.

Ten Wolves Fiveshooter · « **Reply #13 on:** October 09, 2007, 11:45:25 AM »

Howdy Oldwolf

Don't matter, still dang nice looking piece, don't ya think

Have a fine day

Ten Wolves Five Shooter

oldwolf · « **Reply #14 on:** October 09, 2007, 12:28:18 PM »

I still don't see the loading gates on the KIRST cylinders for the ROA.

gregr · « **Reply #15 on:** October 09, 2007, 01:03:22 PM »

Great looking holster, well done.

Outrider #72622 · « **Reply #16 on:** July 13, 2008, 06:05:32 AM »

I think I would get a set in a heartbeat if they had the loading gate. I just don't see one either.

Angel_Eyes · « **Reply #17 on:** August 24, 2008, 11:05:16 AM »

Here are mine, Numbers 2868 & 5118, for your edification!! Adj. rear sights and ramp fore sights removed for Brit CAS comps, I would sell the wife for the opportunity to be able to obtain a couple of those conversion cylinders in .45 Colt (purely for the convenience of course, in case of burglers!!! sorry.... home invaders)

Smokin Gun · « **Reply #18 on:** October 05, 2008, 11:21:33 PM »

Just won a Bid/buy it now, on an R&D .45 Conversion.
Shippin' tomorrow...$210 in what they call Stainless is Nickle Plated.

SG

News:

Author Topic: picture of my ruger old army (Read 14598 times)

Advertising