Author Topic: Annealeez  (Read 557 times)

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Annealeez
« on: March 19, 2021, 06:25:59 PM »
Bought one of these on line about a month ago.  Showed up yesterday.  Set it up after work, and in around a half hour annealed over 200 Krag cases, and 100 Starline .45-70.  Quality unit, well though out, easy to use, good price.  I like it, and makes preserving some of my oddball brass far easier.  I ran the torch off a 20lb camper bottle.  Plenty of hose in the machine to let me set the bottle on the floor with the unit on my loading bench.
https://annealeez.com/


Civilize them with a Krag . . .

Online Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 6503
  • Liked:
  • Likes Given: 72
Re: Annealeez
« Reply #1 on: March 20, 2021, 10:19:55 AM »

 :)  Hickory Dickory . . Doc   ;)

I must admit to having been very tempted by this little unit.  Very Tempted indeed.  The las time I sat down with my really frugal (CHEAP) set-up, it was a couple of hours of sheer boredom.  Also made my back hurt (old guy).  Work has always fascinated me.  Could sit and watch it all day.  I could sit and watch the little machine anneal for me all day too!!  Hummmmmmmm

Stay Safe Out There

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #2 on: March 20, 2021, 10:51:38 AM »
I went back out there later in the evening and loaded up every piece of Krag and 45-70 brass I had left and ran them thru.  The dang thing is mesmerizing! 
Civilize them with a Krag . . .

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #3 on: March 20, 2021, 11:04:22 AM »
Have something metallic close by to dump the catch tray in.  It fills up fast!
Civilize them with a Krag . . .

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 13546
  • Cracker Cow Cavalry
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 122
Re: Annealeez
« Reply #4 on: March 20, 2021, 12:08:53 PM »
Tempting most tempting, I've never been there but looks like I could afford the t-Shirt
when planets align...do the deal !

Advertisers

  • Guest
Re: Annealeez
« Reply #5 on: Today at 05:19:11 PM »

Offline Marshall Matt Dillon

  • Active citizen
  • *
  • Posts: 40
  • Liked:
  • Likes Given: 2
Re: Annealeez
« Reply #5 on: March 21, 2021, 06:00:52 AM »
Will it do 45 schofield and 38 spec? The short brass?

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #6 on: March 21, 2021, 06:29:38 AM »
No, I'm not sure what flame annealer could.  Probably go induction for that.  I've never bothered with pistol brass myself.
Civilize them with a Krag . . .

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #7 on: March 21, 2021, 06:39:29 AM »
Did some measurements.  Pretty sure I could do .45 Colt cases and similar, but not much shorter.  Maybe they could make some skinny wheels for that.
Civilize them with a Krag . . .

Online Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 6503
  • Liked:
  • Likes Given: 72
Re: Annealeez
« Reply #8 on: March 21, 2021, 09:56:44 AM »

 :)  Oh Darn   ;)

I just hate it when I save a bundle of money.  Thank You Marshal Dillon, for asking the KEY question.  If the dandy little machine won't do 45 Schofield, Cowboy 45 Special and 38 special, it would be useless to me.  Oh Schuckey Darns.

Looks like I stick with my El Cheapo set up, which actually cost me nothing, as I had all the components for years and years.  Well amortized so to speak. 

Spring time is Annealing Time in my garage.  Groan.

Stay Safe out There

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #9 on: March 21, 2021, 11:34:07 AM »
Yeah, these kind of machines are really meant for rifle brass.
Civilize them with a Krag . . .

Advertisers

  • Guest
Re: Annealeez
« Reply #10 on: Today at 05:19:11 PM »

Offline PJ Hardtack

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4005
  • Liked:
  • Likes Given: 0
Re: Annealeez
« Reply #10 on: March 23, 2021, 12:43:12 PM »
I've worked out a system utilizing an electric screw driver. I can do both rifle and pistol brass by simply putting a spacer in the cup to raise the height of the pistol brass.

That and a soft flame propane torch and you're good to go.
"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #11 on: March 23, 2021, 01:34:05 PM »
Did all my .50-70 and 43 Spanish brass today.  Thing has worked itself out of a job for now.  Now I need to load all this stuff.  I also tried some Starline .45 Colts, and it worked well.  If he had some 1/4" thick wheels you could probably do a lot of pistol brass.
Civilize them with a Krag . . .

Offline Marshall Matt Dillon

  • Active citizen
  • *
  • Posts: 40
  • Liked:
  • Likes Given: 2
Re: Annealeez
« Reply #12 on: April 07, 2021, 06:22:59 AM »
Did all my .50-70 and 43 Spanish brass today.  Thing has worked itself out of a job for now.  Now I need to load all this stuff.  I also tried some Starline .45 Colts, and it worked well.  If he had some 1/4" thick wheels you could probably do a lot of pistol brass.

Could a set of wheels be cut down?

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #13 on: April 07, 2021, 04:46:25 PM »
See no reason why not.  The wheels are some sort of high density plastic, (Derlin?) and I'd think a band saw would make an easy cut.
Civilize them with a Krag . . .

Offline Marshall Matt Dillon

  • Active citizen
  • *
  • Posts: 40
  • Liked:
  • Likes Given: 2
Re: Annealeez
« Reply #14 on: April 07, 2021, 06:45:42 PM »
See no reason why not.  The wheels are some sort of high density plastic, (Derlin?) and I'd think a band saw would make an easy cut.

Some sort of fire retardant material around the wheel, or just traction material?

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4233
  • Liked:
  • Likes Given: 6
Re: Annealeez
« Reply #15 on: April 07, 2021, 06:55:29 PM »
The lower wheel has a tractive band around it, the upper is plain.   With shorter cases you try to angle the flame just a bit away from the wheels, but I've had no problems with heat damage.  Some have, but always admit to having  not paid attention to how the flame had been aimed.   You pretty much have to have direct flame contact to cause damage.  The wheels are heat resistant, but will char if in flame contact.
Civilize them with a Krag . . .

 

SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com