Author Topic: Cimarron 1911, nickle vs polished  (Read 229 times)

Online Abilene

  • Top Active Citizen
  • *
  • Posts: 3030
    • Abilene's CAS Pages
  • SASS #: 27489
Cimarron 1911, nickle vs polished
« on: February 11, 2020, 10:50:47 pm »
It was just over 8 years ago I bought my nickle 1911.  I had a 4" Kimber since 1999 but needed a government size for Wild Bunch.  I have been very pleased with it.  I have done very little "practice" with it, mostly shooting at matches, so have a mere 1975 rounds through it.  When I bought it, I was torn between the nickle model and the polished blue model.  So, with the excuse that I should own a backup WB gun, I finally got the polished model as well.  They both started life as the "parkerized" (matte finish) guns from Armscor, and went to Ford Plating in Florida for polish and plating.  But I am noticing some small differences in the guns.  I'm not sure if these sort of differences are just random gun to gun, or if the base model has changed somewhat over those years.

The ejection port on the polished is lowered the same amount as the nickled, but has less radius in the corners on the right side of the slide.  The polished trigger is shorter (I really like the longer one).  The sights are a little different, even smaller and thinner front sight on the polished gun, but the rear is wider so it is actually a better sight picture.   The thumb safety on the new gun is considerably more difficult to push up - hopefully that will ease up.

I cleaned the gun and took it to a CAS match this past weekend so I could give it a quick try after the match.  I ran three magazines of my 230gr WB ammo through it with no problems.  I will probably shoot it in the next WB match to give it a better workout. The pictured grips did not come with the gun.  The grips it came with were sort of mustard colored.  Not too bad but I like these better.  They originally came on the nickled gun.  They are also slightly thinner and less aggressive texturing than the ones that came on the polished gun.  It does have a beautiful polish job.  Thank goodness for microfiber towels.  :)






Online Abilene

  • Top Active Citizen
  • *
  • Posts: 3030
    • Abilene's CAS Pages
  • SASS #: 27489
Re: Cimarron 1911, nickle vs polished
« Reply #1 on: February 11, 2020, 11:50:43 pm »
Oh yeah, and the grip safety tang is a bit longer and "pointier" on the new gun.

Offline Galen

  • Top Active Citizen
  • *
  • Posts: 177
Re: Cimarron 1911, nickle vs polished
« Reply #2 on: February 12, 2020, 04:59:42 am »
who does the finishing for Cimarron?

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 12202
  • Cracker Cow Cavalry
Re: Cimarron 1911, nickle vs polished
« Reply #3 on: February 12, 2020, 05:55:01 am »
Very nice Abilene. I got the Polished Blue about 6 years ago.
As I recall , I had had to order it from an LGS/Cimarron dealer in Georgia, Cimarron was out of stock at the time.
I was unaware Fords did the polished blue/plating until you posted that fact in another thread some weeks ago.
I bought some classic Chip McCormick Magazines off eBay....

I've been very pleased with my gun
when planets align...do the deal !

Offline wildman1

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 2724
Re: Cimarron 1911, nickle vs polished
« Reply #4 on: February 12, 2020, 07:01:34 am »
Did you get the shoulder holster that goes with it?
wM1
WARTHOG, Dirty Rat #600, BOLD #1056, CGCS,GCSAA, NMLRA, NRA, AF&AM, CBBRC.  If all that cowboy has ever seen is a stockdam, he ain't gonna believe ya when ya tell him about whales.

Online Abilene

  • Top Active Citizen
  • *
  • Posts: 3030
    • Abilene's CAS Pages
  • SASS #: 27489
Re: Cimarron 1911, nickle vs polished
« Reply #5 on: February 12, 2020, 09:15:25 am »
I did not get the tanker holster.  It is not actually a WW1 holster and is not wild bunch legal, so I had no real desire for it.  At one time, buying the polished or nickled gun got you a free holster, but not now.

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 5793
Re: Cimarron 1911, nickle vs polished
« Reply #6 on: February 12, 2020, 10:31:51 am »

 ;D  Hey Abilene   ;D

Atz a really swell pair of 1911s.  I normally don't drool over "Government" model guns but I'll make an exception for yours.  REALLY REALLY NICE.  I do admit shiny objects such as those two will upon occasion (always) distract me.  Like a Raven in a jewelry store.

Unfortunately, I'm not at all a "fan" of the new and improved "Wild Bunch" as now practiced at/by/for SASS.  SASS managed to take all the grins and giggles out of the "Original" Wild Bunch Idea.  I could however, be coerced into one of those 1911s.  I now pack a Kimber for carry.  Nobody has yet designed/manufactured a better Semi-Auto pistol.  1911s ROCK!!!

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 12202
  • Cracker Cow Cavalry
Re: Cimarron 1911, nickle vs polished
« Reply #7 on: February 12, 2020, 01:07:38 pm »
About July of 2019  I happened in to my friends LGS ...on consignment was new NIB Springfield Armory NB Mil Surp
The owner was asking $650 because he wanted to get a Glock 17 Gen 4....

an AH Ha moment say I... I just happen to have a  Glock 17 Gen 4 I won as door prize ...  nice gun but not really my cupa.
a trade was wrangled  even Steven

 It is shown below with my Blued Cimarron bottom and my prize original Ithaca 1911 as received from the pilot who flew with it over France in 1944, including the shoulder holster he had.

" Nobody has yet designed/manufactured a better Semi-Auto pistol.  1911s ROCK!!!   you can say that again !

when planets align...do the deal !

Online Abilene

  • Top Active Citizen
  • *
  • Posts: 3030
    • Abilene's CAS Pages
  • SASS #: 27489
Re: Cimarron 1911, nickle vs polished
« Reply #8 on: February 12, 2020, 07:11:10 pm »
who does the finishing for Cimarron?

When Cimarron first started carrying this 1911 from Armscor, they sent a number of them to Ford Plating in Florida for the polish/blue, and polish/nickle finishes.  After a few years they started having Armscor do those finishes.  As a result, the final cost went down and it saved time.  Those finishes were nearly as good as Ford.  If you held one gun from each in your hands, you could tell a slight difference.  But if you just looked at the Armscor finished gun, it looked just fine.  I'm not sure if it was because Armscor didn't want to do the finishes any more, or if Cimarron renegotiated prices with Ford, but now the guns are again finished by Ford.  I do not know when they changed back to Ford.

 

Menu Editor Pro 1.0.2 | Copyright 2014, Matthew Kerle