Author Topic: Rossi 92 safety  (Read 8755 times)

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 892
Rossi 92 safety
« on: August 26, 2019, 04:10:22 pm »
A lot of people remove the safety flip-lever but has anyone replaced the safety?  If so, was it easy or hard to do?

I want to remove one but concerned that if I do not like the alteration can I return it to original.  Alteration will be my own approach.

Thanks for any comments.
Black River Smith

Offline Jeremiah Jones

  • Very Active Citizen
  • *
  • Posts: 71
Re: Rossi 92 safety
« Reply #1 on: August 26, 2019, 04:40:31 pm »
One pin to remove to swap safety in/out.  Very easy to remove or replace.  I got my blanking plug from Steve's.

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 5476
Re: Rossi 92 safety
« Reply #2 on: August 27, 2019, 09:46:25 am »

PLUS ONE too Jeremiah    ;D

Use to replace that pesky safety on the top of the bolt frequently.  There is a ball and spring in there so you will want to be careful taking it apart.  Steve's Gunz has a very nice replacement "cap" for the hole.  Quite reversible.

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 892
Re: Rossi 92 safety
« Reply #3 on: August 27, 2019, 12:33:21 pm »
I guess the word I should have used instead of 'replaced' was 're-installed' the safety.  I thought the second line clarified the question line.  Sorry if not.

I know that people remove them and put plugs/fillers into the hole.  But the main question was 'has anyone gone back and re-installed the original safety lever'?

How easy is that?
Black River Smith

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 5476
Re: Rossi 92 safety
« Reply #4 on: August 27, 2019, 02:39:26 pm »

As long as you don't have to chase the small parts, it's about a 10 minute job.  Gun looks a whole lot better without that stupid safety thingie on it.

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 892
Re: Rossi 92 safety
« Reply #5 on: August 27, 2019, 07:31:09 pm »
Coffinmaker,

Thanks for posting an answer.  Appreciate that.

I agree with you about the appearance of the bolt without that chunk of metal there.  That is why I am debating with myself to take it out.  Just wanted to know what it was like to re-insert if something 'needed to be done' afterwards.
Black River Smith

Offline Cliff Fendley

  • NCOWS
  • Top Active Citizen
  • ***
  • Posts: 3252
Re: Rossi 92 safety
« Reply #6 on: September 05, 2019, 05:04:05 pm »
As long as you don't have to chase the small parts

Yeah but if you don't have to do that it takes all the fun out of it ;D
http://www.fendleyknives.com/

NCOWS 3345  RATS 576 NRA Life member

Johnson County Rangers