Uberti 1866 Mfg Date

[Ridge Runner]

Good evening.  Might anyone know approximately when a Uberti-made 1866 with a serial number of 58183, imported by EMF, would have been manufactured?  I'mm trying to stay away from the older ones due to lack of parts.

[Coal Creek Griff]

Italian guns will have a date code stamped on them. Do a search for Italian date codes and it should be easy to figure out (assuming that you have the gun in hand to check the code).

CC Griff

[Major 2]

Look in the Sticky post section here on this very Board

https://www.cascity.com/forumhall/index.php/topic,52460.0.html

find the marks on your gun that look like this example [AD] letters will be of course be the clue to your guns year of Manufacture.

[Advertising]

[Ridge Runner]

Thanks guys.  Unfortunately there is no observable date stamp on the gun.  There is just the serial number, a CAT1570, a PSF, and a very small crest.  I'll probably take a chance, since it has only been fired a dozen times.

[Abilene]

Sometimes the date code can be hard to find on a rifle, could be the stock or forend wood has to be removed.
 Just going by the serial number, I'm going to estimate mid '90's, so you are probably fine.  And it will for sure have a much better ladle than the more recent guns!

[Major 2]

May be under the tang

[Coffinmaker]

Now ... now .... Abilene.  You know darn'd well ... Uberti "Enhanced" that Ladle to improve the 1866 for us connoisseurs.  After all, then went from a ladle that never broke to one that is Ga-run-teed to break.  Not if it's gonna break, just how soon.   

[Coal Creek Griff]

My '66 is stamped on the bottom tang near the Uberti name. The marking is somewhat small.

CC Griff

[Abilene]

My '66 is stamped on the bottom tang near the Uberti name. The marking is somewhat small.

CC Griff

Since I always knew when mine was built I never even bothered to look for the stamp, but got curious so I looked and mine (BN) is there as well.

[Slamfire]

 I'v been eyeball'n a 66 w/ xxx on barrel @ the breech,, makes it a 77 model ,, not worried  about parts if price gets right,, got a mini mill & lathe ,,  " if man made it,, it  can be re made,, if GOD made it ,, leave it alone ,, it's already right " ( my 2 cent's )



  smoke'm if ya' got'm ,, Hootmix.