Author Topic: Screwed up 1860 Henry Mag follower  (Read 10814 times)

Offline Henryshooter

  • Citizen
  • *
  • Posts: 5
  • Liked:
  • Likes Given: 0
Screwed up 1860 Henry Mag follower
« on: July 30, 2019, 06:42:00 PM »
Hello, I'm new to the Uberti 1860 Henry, iron framed .44-40. Have not fired it in competition, needing to load the magazine full.  I have tried various ways of moving the magazine follower up, then turning the magazine top over with out pinching my thumb. I have let the magazine follower slam all the way down on an empty magazine. Obviously, Oops! It sheared off. I'm researching how to fix this. Do I have to take the action apart from the beginning or can I go directly to the problem? Love this rifle. Thank you.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15821
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 411
Re: Screwed up 1860 Henry Mag follower
« Reply #1 on: July 31, 2019, 06:52:09 AM »
There is a screw at the muzzle aside of the front sight... remove this and the front will slide off that is full access to the spring and follower
Simply replace the sheared follower and Bobs your Uncle
when planets align...do the deal !

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7600
  • Liked:
  • Likes Given: 125
Re: Screwed up 1860 Henry Mag follower
« Reply #2 on: July 31, 2019, 09:25:02 AM »

PLUS ONE to Major 2    :D

I would add,  when you have the barrel end turned, the Mag Spring and the Follower will attempt to escape custody.  At high velocity I might add.

Advertising

  • Guest
Re: Screwed up 1860 Henry Mag follower
« Reply #3 on: Today at 12:02:05 AM »

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15821
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 411
Re: Screwed up 1860 Henry Mag follower
« Reply #3 on: July 31, 2019, 09:56:09 AM »
PLUS ONE to Major 2    :D

I would add,  when you have the barrel end turned, the Mag Spring and the Follower will attempt to escape custody.  At high velocity I might add.

yeah ! there is that  ;)
when planets align...do the deal !

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7600
  • Liked:
  • Likes Given: 125
Re: Screwed up 1860 Henry Mag follower
« Reply #4 on: July 31, 2019, 03:06:16 PM »

And ... your gonna have some SERIOUS FUN getting the spring and follower back in   ;D

Offline swampman

  • blacksmith mechanic
  • Very Active Citizen
  • *
  • Posts: 69
  • Liked:
  • Likes Given: 2
Re: Screwed up 1860 Henry Mag follower
« Reply #5 on: August 01, 2019, 03:12:54 AM »
You broke the magazine follower? That's a first for me. And after nearly 30 years of using and abusing a Henry both on and off the reenacting field I thought I'd seen all it's weak points.   ;D
A lot of what is taken for engineering fact, if you dig into it far enough, is often just someone's opinion.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15821
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 411
Re: Screwed up 1860 Henry Mag follower
« Reply #6 on: August 01, 2019, 08:04:18 AM »
"If something can go wrong, it will."   Its not just a statement,  its a LAW
when planets align...do the deal !

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4668
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1174
Re: Screwed up 1860 Henry Mag follower
« Reply #7 on: August 01, 2019, 09:58:09 AM »
Did you happen to buy the Henry new?  If it is within the warranty period, the importer may just send you a new follower.

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7600
  • Liked:
  • Likes Given: 125
Re: Screwed up 1860 Henry Mag follower
« Reply #8 on: August 02, 2019, 04:19:55 PM »

I would suggest you contact VIT Gunparts, Taylors and Cimarron (in that order) for a new follower.

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com