Greetings!
Well, I'll put it in writing for everyone!...
S&S supplied the "Winchester-Type" Sling Hook; although the original Henry Sling Hooks
appear to be bronze, I could not find one, and opted for steel.
Buckleguy.com supplied the hard-to-find, '1" Solid Brass Double Loop' Buckle, Part #B7102;
they also supplied a '3/4" Natural Brass O-Ring', Part #OR012, which I attached to the Sling
Swivel Attachment. I noticed that many Henrys had an Iron Ring looped through the Attachment
on the Barrel, and being that I wanted to minimize steel to steel galling, I opted for a Brass Ring.
I also chose from Tandy Leather a rather thick piece of 1" wide leather ( $! ) for the Sling, as well
as the '1/4" Screw-Posts' Part #1290-01 for securing the doubled over leather at the Sling Hook
end.
Although I saved perhaps $10 from the price of the cheapest "Henry Sling" that I could find on
the internet, I did enjoy the process, and count this as my "first real" leather working project. If
someone can aid and assist in my successful downloading of the photos, I'll gladly do so.
M.T.Marfield
7-31-19