Author Topic: Trail Boss through Lee powder dispensers?  (Read 607 times)

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 551
Trail Boss through Lee powder dispensers?
« on: June 04, 2019, 03:51:45 pm »
Howdy, have any of you had experience running TB through the Lee disc powder dispensers? I know you need to give it an extra beat or two with Dillons, but what about the Lees? Thanks
Yup, I'm that DeaconKC from Surplus Rifle
The Deacon AZSA
BOLD 1088

Offline Buffalo Creek Law Dog

  • Top Active Citizen
  • *
  • Posts: 482
Re: Trail Boss through Lee powder dispensers?
« Reply #1 on: June 04, 2019, 05:27:20 pm »
I have been using Trail Boss through a Lee powder dispenser since 2011 and have had no problems what so ever.
SASS 66621
BOLD 678
AFS 43
NFA
ABPA

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 551
Re: Trail Boss through Lee powder dispensers?
« Reply #2 on: June 04, 2019, 06:20:43 pm »
Thanks, Law Dog! You LEO?
Yup, I'm that DeaconKC from Surplus Rifle
The Deacon AZSA
BOLD 1088

Offline pony express

  • Top Active Citizen
  • *
  • Posts: 3361
Re: Trail Boss through Lee powder dispensers?
« Reply #3 on: June 04, 2019, 06:46:25 pm »
I don't have a Lee measure. With my Lyman 55, I have to work the handle "smartly", tap once at the up stroke, and "double tap" the handle on the bottom stroke, to be sure it doesn't bridge in the measure.

You may just have to throw and weigh a few charges to find out what is most consistent.

Offline Buffalo Creek Law Dog

  • Top Active Citizen
  • *
  • Posts: 482
Re: Trail Boss through Lee powder dispensers?
« Reply #4 on: June 04, 2019, 09:15:28 pm »
Thanks, Law Dog! You LEO?
[
Retired Military Police Captain./quote]
SASS 66621
BOLD 678
AFS 43
NFA
ABPA

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 551
Re: Trail Boss through Lee powder dispensers?
« Reply #5 on: June 04, 2019, 11:26:38 pm »
Retired Corrections here Law Dog, Back the Blue
Yup, I'm that DeaconKC from Surplus Rifle
The Deacon AZSA
BOLD 1088

Online RRio

  • Arizona Law Dawg
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 1677
  • Single Action Specialist
Re: Trail Boss through Lee powder dispensers?
« Reply #6 on: June 05, 2019, 03:26:46 am »
I don't have a Lee measure. With my Lyman 55, I have to work the handle "smartly", tap once at the up stroke, and "double tap" the handle on the bottom stroke, to be sure it doesn't bridge in the measure.

You may just have to throw and weigh a few charges to find out what is most consistent.

+1    Same procedure, works fine for me. No variances.
"I won't be wronged, I won't be insulted, I won't be laid-a-hand on. I don't do these things to other people and I require the same of them."  - J.B. Books

"Proud citizen of CasCity since 2004." 
STORM #178       USFACS #28

Offline Bunk Stagnerg

  • Top Active Citizen
  • *
  • Posts: 577
Re: Trail Boss through Lee powder dispensers?
« Reply #7 on: June 05, 2019, 11:29:39 am »
Before i saw the light and did forsake the fad stuff and start shooting the real true Gun]Powder I will freely admit I did use a lot of Trail Boss.
But, and there is always a but, it takes a learning curve to get it to meter properly. At least that was my experience using a Dillon 550B. It seems to go through the measure like slowly falling snow, which we do not have in this part of Texas, however that is what I have been told by people that survive in country where it does snow.
It does measure very exactly once you find the rhythm and is almost impossible to double charge and least in .45 Colt and .45 Cowboy Special cases.
It is a good powder, but you may wind up with lddy biddy grey cherrios all over the bench.
Yr' Obt' Svt'
Bunk

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 551
Re: Trail Boss through Lee powder dispensers?
« Reply #8 on: June 05, 2019, 12:44:14 pm »
Thank you all very kindly! Hope it will not be too much of a headache and be worth the extra attention!
Yup, I'm that DeaconKC from Surplus Rifle
The Deacon AZSA
BOLD 1088

Offline Marshal Hangtree

  • Citizen
  • *
  • Posts: 10
  • SASS #: 105256
Re: Trail Boss through Lee powder dispensers?
« Reply #9 on: June 06, 2019, 07:15:08 am »
My Lee Auto Drum meters Trail Boss very reliably and precisely.  The Auto Drum beets the Auto Disk hands down.

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 551
Re: Trail Boss through Lee powder dispensers?
« Reply #10 on: June 06, 2019, 04:38:55 pm »
Thanks, I wonder if the drum model would work in the system I now have. They seem awfully similar in set up.
Yup, I'm that DeaconKC from Surplus Rifle
The Deacon AZSA
BOLD 1088

Offline Marshal Hangtree

  • Citizen
  • *
  • Posts: 10
  • SASS #: 105256
Re: Trail Boss through Lee powder dispensers?
« Reply #11 on: June 07, 2019, 08:25:24 am »
The Auto Drum will work with any of the Lee Powder-Thru dies.  It will mount exactly the same as your Auto Disk.  The riser is highly recommended.

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 551
Re: Trail Boss through Lee powder dispensers?
« Reply #12 on: June 07, 2019, 08:52:24 am »
Thank you!
Yup, I'm that DeaconKC from Surplus Rifle
The Deacon AZSA
BOLD 1088

Offline Emmett Brown

  • Citizen
  • *
  • Posts: 4
Re: Trail Boss through Lee powder dispensers?
« Reply #13 on: July 07, 2019, 03:39:01 pm »
I use the Lee Auto Disk with Trail Boss on their turret press and have had no problems, have loaded many thousands of rounds.  I do recommend careful weighing to select a disc, their guide is not necessarily accurate!

Online Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 3589
Re: Trail Boss through Lee powder dispensers?
« Reply #14 on: July 07, 2019, 05:27:39 pm »
I have used TB thru a Lee Perfect with no problems.  HOWSUMEVER, I have experienced bridging many times in the Powder Thru die itself.  Constant checking of the case itself is called for,  with a run back up into the die and a tap with a wrench should levels be low.
Civilize them with a Krag . . .

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 5365
Re: Trail Boss through Lee powder dispensers?
« Reply #15 on: July 07, 2019, 08:19:11 pm »

Here We Go Again .... Marching Down The Avenue ....  I don't shoot Trail Boss.  WaBac (thank Professor and Sherman) when I dabbled in that Heathen Fad Smokeless stuff, I didn't like Trail Boss at all.  I don't even have any on hand (why would I), nor under hand.  I also don't load thru a Lee anything, except my Lee Classic for De-Prime/Prime All Brass 12Ga.  I do all my loading on a pair of Dillon 650s, set up for large and small primers (individually).  SO:

I would be apparent this missive is of no help nor information to the OP what so ever.  Therefore it may be, and should be ignored by all concerned.  I won't be at all affronted should one and all choose to ignore this verbose and useless commentary.  It is after all Sunday Evening and I'm bored.  No .... really ..... I'm bored.

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 551
Re: Trail Boss through Lee powder dispensers?
« Reply #16 on: July 07, 2019, 09:12:03 pm »
My good sir Coffinmaker. Terribly sorry to hear of your boredom. So we are sending two 3 year olds over tou your house to entertain you.We gave them 2 energy drinks each and a puppy! Your friends DO want to take good care of you!  ;D ;D
Yup, I'm that DeaconKC from Surplus Rifle
The Deacon AZSA
BOLD 1088

Online Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 3589
Re: Trail Boss through Lee powder dispensers?
« Reply #17 on: July 07, 2019, 09:19:53 pm »
We gave them each a paint ball gun as well.  Have fun!
Civilize them with a Krag . . .

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 5365
Re: Trail Boss through Lee powder dispensers?
« Reply #18 on: July 08, 2019, 09:54:21 am »

OH ......... But it is SOOOOOOOOOOO good to be LOVED (Furiously scrubbing walls)   ;D

Offline Pappy Myles

  • Top Active Citizen
  • *
  • Posts: 287
Re: Trail Boss through Lee powder dispensers?
« Reply #19 on: July 30, 2019, 10:22:46 am »
I have had some difficulty with trail boss and other "flake" powders leaking out "one flake at a time" during loading operations.  On ball powders, etc, it works great.   I've viewed some of the you tube videos on "fixes" and tightening up the seals, but I havnt done that.
NRA Patron Member
NRA Instructor
NRA Range Safety Officer
TSRA Life Member
USMC Vet
Dirty RAT # 308
Life SASS # 59784 ROI and ROII