Author Topic: Assembly/Disassembly Instructions  (Read 389 times)

Offline Gabriel Law

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 485
Assembly/Disassembly Instructions
« on: April 30, 2019, 01:20:56 pm »
Assembly/Disassembly WRITTEN instructions:  I want to disassemble my Model 336 CB rifle to take care of a burr that is marking my brass.  Can anyone streer me to something on the internet, or a book?

Online Abilene

  • Top Active Citizen
  • *
  • Posts: 2803
    • Abilene's CAS Pages
  • SASS #: 27489
Re: Assembly/Disassembly Instructions
« Reply #1 on: April 30, 2019, 02:38:24 pm »
Google found this:
http://castboolits.gunloads.com/showthread.php?139321-Marlin-M-336-disassembly

Youtube videos are out there but you want written. 

Maybe Bibbyman or one of the other Marlin afficiandos will pipe up.

Offline Bibbyman

  • Top Active Citizen
  • *
  • Posts: 386
  • SASS #: 99098

Offline Gabriel Law

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 485
Re: Assembly/Disassembly Instructions
« Reply #3 on: May 07, 2019, 02:26:45 pm »
Thanks for the replies lads.  I'll see if I can stay out of trouble.  My need is to see what is seriously scratching my brass as I work it through the action, fire the cartridge and eject, then polish the offending part.

Offline Gabriel Law

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 485
Re: Assembly/Disassembly Instructions
« Reply #4 on: May 15, 2019, 10:59:35 am »
I downloaded and printed the instructions and applied them to strip my rifle and put it back together again.  It is a simple process without any head-scratching, and all went extremely well.  I couldn't find any issues that might be scraping my brass, but in the action, there were a great number of tiny bits of brass, so this has been going on probably since the rifle was new.  I polished the carrier which didn't appear tohave any sharp corners, and re-assembled the rifle.  I coated a cartridge with felt pen and cycled it.  No more scrapes!!

So thanks for steering me in the right direction...a total success.

Offline Bibbyman

  • Top Active Citizen
  • *
  • Posts: 386
  • SASS #: 99098
Re: Assembly/Disassembly Instructions
« Reply #5 on: May 19, 2019, 12:42:03 pm »
I downloaded and printed the instructions and applied them to strip my rifle and put it back together again.  It is a simple process without any head-scratching, and all went extremely well.  I couldn't find any issues that might be scraping my brass, but in the action, there were a great number of tiny bits of brass, so this has been going on probably since the rifle was new.  I polished the carrier which didn't appear tohave any sharp corners, and re-assembled the rifle.  I coated a cartridge with felt pen and cycled it.  No more scrapes!!

So thanks for steering me in the right direction...a total success.

Great!  Now you're and expert Marlin mechanic.  ;)

Thenks for getting back with you're happy ending.