Author Topic: Stoeger question  (Read 1668 times)

Offline buxtonguy

  • Citizen
  • *
  • Posts: 15
Stoeger question
« on: January 16, 2018, 12:58:54 pm »
Stoeger Coach Gun 12ga 3" 20" SxS Gaucha Brazil are these legal for Cowboy shoots?  What is the rule on extractors?  thanks for any help

Online Abilene

  • Top Active Citizen
  • *
  • Posts: 2705
    • Abilene's CAS Pages
  • SASS #: 27489
Re: Stoeger question
« Reply #1 on: January 16, 2018, 02:14:53 pm »
Lots of folks use the Stoeger.  Extractors are fine and most side-by-side guns have them.  If a gun has ejectors (shoots the empties out when gun is opened) then the ejectors must be disabled.

Offline buxtonguy

  • Citizen
  • *
  • Posts: 15
Re: Stoeger question
« Reply #2 on: January 16, 2018, 03:10:16 pm »
thanks

Offline rickk

  • Top Active Citizen
  • *
  • Posts: 1125
Re: Stoeger question
« Reply #3 on: May 24, 2018, 02:31:11 pm »
If you are still shopping, you may prefer the double trigger version over the single trigger version.

For many people, the single trigger version has a nasty habit of firing both barrels with one trigger pull.  It is not only annoying, it is also very painful.

Spend the extra $100 bucks and get the deluxe model. It has both screw in chokes and also a halfway decent recoil pad.

Offline Lucky R. K.

  • Purveyor of Fire & Brimstone
  • Top Active Citizen
  • *
  • Posts: 329
Re: Stoeger question
« Reply #4 on: August 05, 2018, 09:33:48 am »

Would anybody know where I might find a set of barrels for a 12 Gauge 20" Coach Gun and if so, are they interchangeable? Mine were damaged to the point they are no longer useable and I would like to find a set to replace them.

Thanks, Lucky
Greene County Regulators       Life NRA             SCORRS
High Country Cowboys            SASS #79366
Gunpowder Creek Regulators   Dirty RATS #568

The Wind is Your Friend

Offline rickk

  • Top Active Citizen
  • *
  • Posts: 1125
Re: Stoeger question
« Reply #5 on: October 05, 2018, 03:32:53 pm »
You could try sending back for repair. The work is done someplace down southeast... I forget... Georgia maybe? It is a Bennelli repair facility. They turn things around fairly quickly