Author Topic: Conversion cylinder  (Read 1365 times)

Offline gdkmedic

  • Citizen
  • *
  • Posts: 7
  • Liked:
  • Likes Given: 0
Conversion cylinder
« on: August 11, 2011, 05:59:02 pm »
I have a R&D 45 colt conversion cylinder for my ROA. After a few shots it the cylinder does not turn freely when you pull the hammer back. I suspect it is from getting full of crud from ahooting. Any sugestions how I could correct this?

Thanks

Gary

 

SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com