DD's ROA Bullet Phials

[Ned Pepper GB]

Loading my ROA at our monthly shoot using the off gun loading tool purchased from DD when I realised I did not have my nipple wrench/screwdriver to unlock the loading lever to release the cylinder. Took out the ROA/DD Big Lube Bullets from the phials supplied by DD and guess what, the tab on the lid of the phial unlocks the loading lever assembly perfectly, ye-ha.

Ned 

[Dick Dastardly]

Thanks for sharing that Ned.  It's the Cowboy way.  I also use the tab to turn the locking bolt on my ROAs.  Always available, strong enuf and never scratches the gun.

DD-DLoS

[Paladin UK]

Truth ta tell...........

That `ol Ned Pepper is jest plain amazin!!!

Word on the street is that he irons his unnerpants too

Paladin (Whats  jest joshin!! ) UK

[Advertising]

[Mason Stillwell]

Who in the world would have THUNK it

I'll have to give that a try as I am tired of the little scratches.

Thanks Pard

Mason

[Pettifogger]

Actually, if you use a loading stand you don't need to use the lock screw.  The lever will keep the cylinder in and when you get ready to reload just drop the lever, pull it forward and remove the cylinder.  I haven't used the lock in over two years.  You only need to use it if you are going to load with the cylinder in the gun.  If its not engaged, the loading lever will pop out when you try to seat a ball.

[Mason Stillwell]

ALTHOUGH if you use the gun without the loading lever and forget to turn the lock. GUESS WHAT??

The clyinder will fall out on the ground when you are drawing the gun for a stage.

NOW that aint funny.LOL

YEA it really is

Mason(happened to me) Stillwell

[Cactus Cris]

Now I don't care who ya are--THAT'S FUNNY!!!!   Yes It Was!!!!!

[Dick Dastardly]

So, is dropping a loaded and capped cylinder considered the same as dropping a loaded gun??  Cud be a match DQ?

DD-DLoS