CAS City Forum Hall & CAS-L

Special Interests - Groups & Societies => Colt SAA Clones => Topic started by: blackpowder on August 30, 2019, 03:24:25 pm

Title: 32-33 grains in modern italien colt clones safe?
Post by: blackpowder on August 30, 2019, 03:24:25 pm
Hi all around !

does anyone think it a problem to load up Ubertis and Pietas wit 33 grains of powder? The recommended load is 30 grains but modern steels are better than the steel used for the older guns. Just thought I'd ask before I blow something up.  ;D
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Abilene on August 30, 2019, 04:24:37 pm
30 grains of Clays?  Unique?  You didn't say.  I think that would be bad.   ;)

But I know you meant BP, and the modern repros can take all the BP you can fit in the shell.
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Coffinmaker on August 30, 2019, 05:01:30 pm

 ;D  PLUS ONE too Abilene.

Aummmmm  why would you want too  ::)
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: blackpowder on August 31, 2019, 12:20:42 am
I know, should have been more specific. BP of course and no shells - it's a model 1860 cap & ball.

"Why would I want too"? I just noticed there is quite some room left in the chambers with 30 gr.,  so I thought why not load them up to capacity..... 
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Professor Marvel on August 31, 2019, 02:30:19 am
I know, should have been more specific. BP of course and no shells - it's a model 1860 cap & ball.

"Why would I want too"? I just noticed there is quite some room left in the chambers with 30 gr.,  so I thought why not load them up to capacity.....

My Good Blackpowder
I am in full agreement with you - fill the chamber nearly full with room for the ball, and dram that ball down.
Some Folks have  approached me occasionally over the boom, the smoke, etc, but I just tell them I'm  sorry, that's the only measure I have for my powder flask  :P

yhs
prof marvel
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Major 2 on August 31, 2019, 07:18:26 am
My Good Blackpowder
I am in full agreement with you - fill the chamber nearly full with room for the ball, and dram that ball down.
Some Folks have  approached me occasionally over the boom, the smoke, etc, but I just tell them I'm  sorry, that's the only measure I have for my powder flask  :P

yhs
prof marvel

"some Folks have  approached me occasionally over the boom, the smoke, etc"

Seriously ?   that is like going to "Hooters" and complain about the GIRLS !   ::)



Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Coffinmaker on August 31, 2019, 08:45:14 am

Ah Yup   ;D  A big PLUS ONE too Major 2 (again) and the good Perfesser!!!

PS:  FERGOT!!!  Modern built Cap Gun cylinders are made of much sterner stuff than the original Sample Examples.  As are the guns themselves.  Stuffing the chambers full up is no problem atall.
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: blackpowder on August 31, 2019, 01:10:17 pm
Roger...gotcha....I'll fill them chambers up and go blasting away. Thanks! ;D ;D
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Professor Marvel on August 31, 2019, 06:39:12 pm
Roger...gotcha....I'll fill them chambers up and go blasting away. Thanks! ;D ;D

just ensure you still have room for the ball :-) 

whilst real BP usually compresses just fine, some substitutes can be either more or less cooperative.

Oh, and if you choose to use pyrodex, use volume for volume substitute, and clean EXCESSIVELY well
    see here
The Musings of Dutch Bill on Pyro
https://www.cascity.com/forumhall/index.php/topic,56740.0.html

and here
Regarding the Cleaning of Guns After the Use of Pyrodex and 777
https://www.cascity.com/forumhall/index.php/topic,56362.0.html

If you choose to use Triple 7 you need to reduce more, as it is more engertin emerge makes more boom and pressure ... and clean EXCESSIVELY well

Coffin can clue you in on APP and it's cousin....

yhs
prof marvel
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Professor Marvel on August 31, 2019, 06:45:35 pm
"some Folks have  approached me occasionally over the boom, the smoke, etc"

Seriously ?   that is like going to "Hooters" and complain about the GIRLS !   ::)

That there is funny, I don't care who ya are .... I have to believe (but cannot prove, no sources or footnotes)  those folk are usually in the "mouse fart crew"

It is my opninion, which is mine, and belongs to me,that  your missive is  right up there with Gen Schwartzkopf's quote , describing the problems of coalition-building:
?Going to war without France is like going deer hunting without your accordion.?

yhs
prof marvel
Title: Re: 32-33 grains in modern italien colt clones safe?
Post by: Cliff Fendley on September 04, 2019, 03:53:16 pm
My 44-40 loads are around 34 grains of 2f for my pistols and rifles for CAS. I do load some 36 grains of 3f for rifles for higher velocity rounds.

I used to load 45 colt with 34 grains of 2f also although I seldom shoot those anymore and shoot Schofield brass with 28 grains for a more pleasant shooting round.