Cas City Forum Hall & CAS-L

CAS TOPICS => Gunsmithing => Topic started by: Virginia Gentleman on July 05, 2019, 08:42:24 pm

Title: Colt SAA over sized base pin source?
Post by: Virginia Gentleman on July 05, 2019, 08:42:24 pm
Beltmountain stopped making these for Colt and clones, who else makes them?
Title: Re: Colt SAA over sized base pin source?
Post by: Coffinmaker on July 06, 2019, 09:52:28 am

Oh WOW!!  I were unaware.

Nadia Clue.  Good Luck.
Title: Re: Colt SAA over sized base pin source?
Post by: Professor Marvel on July 06, 2019, 02:30:09 pm
My Good Gentleman

Since I source nearly all my parts ?well used? ( and cheap ) I can relate that some replica cylinder pins are larger than others, but I fear it is a matter of ?buy and try?.

Regarding new, I will look around and see what I can find on the interwebs on your behalf...

Yhs
Prof Marvel
Title: Re: Colt SAA over sized base pin source?
Post by: Coffinmaker on July 07, 2019, 08:27:07 pm

Just remembered.  If your pockets are deep, you can probably get oversized base pins from Eddy Janis at Peacemaker Specialists.  Maybe.
Title: Re: Colt SAA over sized base pin source?
Post by: Professor Marvel on July 08, 2019, 02:39:45 am
Suddenly, all my go~to sources have dried up!

Sorry
Prof Marvel
Title: Re: Colt SAA over sized base pin source?
Post by: Coffinmaker on July 08, 2019, 10:23:44 am
PROFESSOR MARVEL   ::)

MINE TOO   :o
Title: Re: Colt SAA over sized base pin source?
Post by: Virginia Gentleman on July 09, 2019, 07:57:33 pm
That's why I reached out to you all.  I can not find a source for one.  I want to fit several as replacements and either rust blue or nitre blue them once they are fitted.