Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => RATS => Topic started by: wildman1 on August 19, 2015, 11:33:39 AM

Title: Ruger Blackhawk 45 Colt 3 screw.
Post by: wildman1 on August 19, 2015, 11:33:39 AM
Any one have an idea what a Ruger Blackhawk 45 Colt pre transfer bar is worth? It shows a small amount of wear on the back sight, almost no ring around the cylinder no wear on the end of the barrel, the grips are original and in excellent condition. Manufacture date 1971. I believe these were only made for 3 years. Looking at the barrel, cylinder and overall I would say it has had less than a box of cartridges put through it. wM1
Title: Re: Ruger Blackhawk 45 Colt 3 screw.
Post by: Mustang Gregg on August 19, 2015, 09:30:13 PM
Whatever market demands.  I have seen one similar go for $1000.  I have also seen well-used 3-screw models sell for $400 to $500.
Check Gunbroker.com.  They come up quite a bit.

Mustang Gregg
Title: Re: Ruger Blackhawk 45 Colt 3 screw.
Post by: wildman1 on August 20, 2015, 04:44:06 AM
Thanks MG, this one belongs to an FFL that does transfers for me and he showed it to me a while back but does not want to sell it. wM1
Title: Re: Ruger Blackhawk 45 Colt 3 screw.
Post by: Mustang Gregg on August 20, 2015, 10:20:29 PM
Roger that.  I have a couple of 200th Year Blackies that I want to hold onto too.

MG
Title: Re: Ruger Blackhawk 45 Colt 3 screw.
Post by: 4597 on January 07, 2016, 11:20:22 AM
Shucks, I was wishing that someone would have came in with a closer price. But then from the way it was presented it's no different than calling your Doctor on the phone, telling him your arm hurts and you would like to know if it's broken.
Title: Re: Ruger Blackhawk 45 Colt 3 screw.
Post by: King Medallion on March 25, 2016, 06:32:41 AM
I just picked up this unfired 45 convertible for $600.
(https://im1.shutterfly.com/ng/services/mediarender/THISLIFE/010046471428/media/52455195466/medium/1484577946/enhance)
Title: Re: Ruger Blackhawk 45 Colt 3 screw.
Post by: Mustang Gregg on March 28, 2016, 12:07:29 AM
NICE one!!!