Cas City Forum Hall & CAS-L
Special Interests - Groups & Societies => Spencer Shooting Society => Topic started by: Rube Burrows on February 23, 2024, 01:56:35 PM
-
My video shooting the Spencer from Taylor's and Company
Loaded with hand loaded 45 colt 200g RNFP bullets, starline brass, 5g of TB with a wolf primer.
https://youtu.be/LltvTej7ib0?si=oi_YJKpnnXNUhszK
-
Nice video. That's a sweet looking firearm! One year at the NCOWS Nationals, one of the shooters was using a Spencer. He fired the seven rounds and then loaded three on the clock. I've always had a Spencer on my wish list. You will have to make a scabbard for it.
Thanks for sharing this with us.
-
Tip from a fellow Carbine shooter; work the lever more briskly to and fro. Faster in one fluid motion without stopping. Down and back, down and back. Mine is a .44 S&W Russian version and she likes it rough. The faster the better. Leave the butt on your shoulder, look down the sights and run that lever as fast as you can, then thumb the hammer back before tripping the hammer. ;D
-
The wood finish on that carbine is different from what I'm used to seeing on the Chiappa Spencers, though I haven't seen a new one in quite some time. It is also very pretty wood!
-
Nice video. That's a sweet looking firearm! One year at the NCOWS Nationals, one of the shooters was using a Spencer. He fired the seven rounds and then loaded three on the clock. I've always had a Spencer on my wish list. You will have to make a scabbard for it.
Thanks for sharing this with us.
Thanks. That would be fun.
-
Tip from a fellow Carbine shooter; work the lever more briskly to and fro. Faster in one fluid motion without stopping. Down and back, down and back. Mine is a .44 S&W Russian version and she likes it rough. The faster the better. Leave the butt on your shoulder, look down the sights and run that lever as fast as you can, then thumb the hammer back before tripping the hammer. ;D
Thanks for the tip. I will try that next time I have it out.
-
The wood finish on that carbine is different from what I'm used to seeing on the Chiappa Spencers, though I haven't seen a new one in quite some time. It is also very pretty wood!
Thanks for watching. It is a pretty rifle/carbine for sure.
-
Tip from a fellow Carbine shooter; work the lever more briskly to and fro. Faster in one fluid motion without stopping. Down and back, down and back. Mine is a .44 S&W Russian version and she likes it rough. The faster the better. Leave the butt on your shoulder, look down the sights and run that lever as fast as you can, then thumb the hammer back before tripping the hammer. ;D
Cock the hammer BEFORE cycling the action. The bolt in a Spencer does not move straight back, when first opening the lever the bolt moves down slightly. You could break the firing pin if you don't cock before opening the action.
-
Had my carbine completely disassembled on my workbench just yesterday. Including the the transverse plate the moves the firing pin forward when struck by the hammer face. The firing pin has a return spring that retracts the firing pin from the bolt face just as the bolt drops when the lever is cycled downward stopping contact between hammer face and transverse plate.
I have a Pedreddi Sharps that has a similar inertia driven firing pin system. The firing pin retracts the moment the breech block moves downward out of contact with the hammer face. Not what you would find on the original guns.
-
Thanks for the pointers. I did try it every way while shooting it. Tried it with the hammer on half cock, all the way back and down.
-
Thanks, Rube, for sharing:
Vid's most appreciated.
Please review your posted load info. Maybe typo's.
Are you using only 5gr. TB, and what is the primer, please?
Also, was any work done on the trigger, and what is the weight of the trigger pull?
All the best. Smiles.
El Supremo/Kevin Tinny
-
Thanks, Rube, for sharing:
Vid's most appreciated.
Please review your posted load info. Maybe typo's.
Are you using only 5gr. TB, and what is the primer, please?
Also, was any work done on the trigger, and what is the weight of the trigger pull?
All the best. Smiles.
El Supremo/Kevin Tinny
Yes, 5 grains of trail boss. These are my cowboy action revolver rounds that I just used for this video and test.
The primers are Wolf.
No work done to the gun. Completely stock from Taylors.
-
Rube
Thanks for the video. I also have one in .45 Colt but had to send it back to Chiappa as it did not function well. It 'seems' to be good now. My wood is also very nice.
Macon Due 29445