Author Topic: loading information for .44 colt revolving rifle repro by Italian Palmetto  (Read 3774 times)

Offline AAca

  • Citizen
  • *
  • Posts: 4
  • Liked:
  • Likes Given: 0
Newbie Here,

I just joined as I was finally able to acquire one of the scarce Colt Root Revolving Rifle replicas by Palmetto. It is in .44 caliber but I know little else as Palmetto is long gone.

The gun is in stellar condition and appears well built. It has a Malcolm scope replica attached.

I can hardly wait to shoot it but am looking for guidance on correct loading procedure.

I am not new to black powder or percussion arms. I know the basics but I am a very cautious person and want to do things right.

I know about the importance of safety glasses and hand placement with these rifles.

What I am looking for is more in depth information on loading as apparently Palmetto shipped these with no paperwork.

I would greatly appreciate anybody with actual hands on knowledge with revolving rifles to advise me on conical verses round ammo. Recommended exact caliber. Proper grease and wad usage and black powder type and charge in grains. Also if anyone knows rifling twist it would be appreciated. I will slug
the barrel at some point but want to see what info is out there first.

Also a big plus would be tech specs to form a clean burning paper cartridge.

hope to post some pics soon.


Offline Dave Fox

  • Very Active Citizen
  • *
  • Posts: 64
  • Liked:
  • Likes Given: 1
Check YouTube. There are tutorial videos.

Offline U.S.M.R.

  • Very Active Citizen
  • *
  • Posts: 82
  • Liked:
  • Likes Given: 0
  The information I got with mine called for 40grs. of powder, 44 wad and a .454 round ball.  I used the Lee .454 hollow base mould.  The original carbine load was a 250 gr. bullet and 35 grs. of powder.  Also I replaced the original nipples with ones for musket caps.

Advertising

  • Guest

Offline AAca

  • Citizen
  • *
  • Posts: 4
  • Liked:
  • Likes Given: 0
thank you
These are the kind of tips I am looking for.

Do you use dry wads or do you use some kind of lube?

Offline U.S.M.R.

  • Very Active Citizen
  • *
  • Posts: 82
  • Liked:
  • Likes Given: 0
  I use Ox Lube wads for the round ball, Crisco with a little beeswax mixed in for the grooves of the minie ball.

Offline U.S.M.R.

  • Very Active Citizen
  • *
  • Posts: 82
  • Liked:
  • Likes Given: 0
 Digging through my books I found that the bullet for the Dragoon revolver was 32 to the pound (220 grs.)  The bullet for the revolving Rifle was 28 to the pound (250 grs.) It was a heeled  sugarloaf bullet, they were both shaped the same, with the rifle bullet a little longer. Eras gone by makes a mould for the Dragoon, this probably as close as you will get.

Offline AAca

  • Citizen
  • *
  • Posts: 4
  • Liked:
  • Likes Given: 0
Thank you for all your help.

Would you know where I could find a nipple wrench that would work?
My gun still has the original nipples with the square base and narrow access.

thank you

Offline U.S.M.R.

  • Very Active Citizen
  • *
  • Posts: 82
  • Liked:
  • Likes Given: 0
Musket nipple wrench. 






Offline Cap'n Redneck

  • Commd'g Co. D, Frontier Batt'n, Texas Rangers.
  • Top Active Citizen
  • *
  • Posts: 244
  • Cap'n Redneck SWS #163.
  • GAF #: 273
  • Liked:
  • Likes Given: 0
I'd like to recommend this thread, if You haven't already found it.
The Palmetto M/1855 Root needs some gunsmithing to work at it's best, as do most things Italian...

https://www.cascity.com/forumhall/index.php/topic,16804.msg453981.html#msg453981
"As long as there's lead in the air, there's still hope..."
Frontiersman & Frontiersman Gunfighter: The only two categories where you can play with your balls and shoot your wad while tweaking the nipples on a pair of 44s.

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com