Author Topic: 1860 Type II aim  (Read 643 times)

Offline Pappy Hayes

  • Top Active Citizen
  • *
  • Posts: 477
  • Liked:
  • Likes Given: 1
1860 Type II aim
« on: June 27, 2023, 11:18:59 AM »
I know our Richard's conversions shoot high. So how are you conversion owners using the sights to aim at your target to get a good group?

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 1814
  • SASS #: 110215
  • Liked:
  • Likes Given: 4669
Re: 1860 Type II aim
« Reply #1 on: June 27, 2023, 09:38:16 PM »
My 1860s, a 4 5/8 and 5 1/2" both require me to hold on the bottom of the target for reliable hits. I am considering having a higher blade put on them. They are running a 200 grain RNFP under 7.5 grains of Unique.
SASS DeaconKC
The Deacon AZSA
BOLD 1088
RATS 739
STORM 448
Driver for Howard, Fine & Howard
Veterinary & Taxidermy Clinic
"Either way, you get your dog back"

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: 1860 Type II aim
« Reply #2 on: June 28, 2023, 09:38:35 AM »

 :) Hi Guys  ;)

I'm not going to be lotta help.  NONE of my '60s or Open Top guns have OEM sights.  They all have brass dovetail sights, filed more or less to hit center on a typical 14 x 14 CAS target.  Since I seldom, if ever shoot at paper anymore, I consider "minute of Pie Plate" an acceptable "group."  I do try to put the front sight on the lower third of the targets though, as I have a tendency to "climb" the targets when shoot quickly.

Were I to try to shoot for group with open OEM sights, the "hold" would be at 6 O'Clock with some form of aiming point for reference.  As long as I know roughly where the point of impact is in relation to the sights, I'm good.

As an additional, with ANY open top design revolver, until the Barrel to Arbor fit has been corrected, trying to get a group is a waste of ammunition and time.  If it's a Uberti, out of the box, the Barrel to Arbor fit has traditionally abysmal.

Advertising

  • Guest
Re: 1860 Type II aim
« Reply #3 on: Today at 09:27:10 AM »

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com