Author Topic: To Crimp or not to Crimp  (Read 13389 times)

Offline Steel Horse Bailey

  • Jeff "Steel Horse Bailey" - BP Warthog & C&B Shooter
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 6164
  • A Master of the Sublime & Holy Order or the Soot
  • SASS #: 27463
  • NCOWS #: 1919
  • Liked:
  • Likes Given: 0
To Crimp or not to Crimp
« on: January 10, 2007, 08:08:38 AM »
Howdy all!

Well, folks - what's your take on this?  I've heard about all the types.  I shoot 45-70 with soft bullets, so I'm thinking that a firm crimp, like the ones produced by a Lee Factory crimp die is a no-no.  I'm shooting these rounds thru a Taylor's Sharps repro.  So far, I've been shooting 405 gr bullets, but soon I'll be using bullets that I cast that are 535 gr from a Lyman #457132DV mould.

What say you?

Thanks ahead of time for your answers.

Jeff  "Steel Horse Bailey"
"May Your Powder always be Dry and Black; Your Smoke always White; and Your Flames Always Light the Way to Eternal Shooting Fulfillment !"

Offline Delmonico

  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 23324
  • Liked:
  • Likes Given: 1
Re: To Crimp or not to Crimp
« Reply #1 on: January 10, 2007, 08:16:08 AM »
Jeff, I use a taper crimp with mine.  Most the stuff I had "READ" said don't crimp, me being the type that don't always believe what I read I tried both ways and for some funny reason my rifle doesn't seem to be able to read. 

Of course your milage may vary depending on which book or forum board you have read. ;)  One never knows till you try it.
Mongrel Historian


Always get the water for the coffee upstream from the herd.

Ab Ovo Usque ad Mala

The time has passed so quick, the years all run together now.

Offline Otter

  • Top Active Citizen
  • *
  • Posts: 121
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #2 on: January 10, 2007, 09:07:34 AM »
I generally don't crimp my 45-70 loads. I put a light crimp on them when they are for hunting use, just enough to keep the bullet from falling out. Don't have any empirical data to support crimp or no crimp - just the way I do it. YMMV . . .
I hate rudeness in a man, I won't tolerate it . . . W.F. Call

NRA Endowment Life Member

Advertising

  • Guest
Re: To Crimp or not to Crimp
« Reply #3 on: Today at 05:12:48 PM »

Offline Silver Creek Slim

  • Buckaroo
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 18433
  • NCOWS #: 2329
  • GAF #: 144
  • Liked:
  • Likes Given: 104
Re: To Crimp or not to Crimp
« Reply #3 on: January 10, 2007, 11:20:19 AM »
I crimp so the boolit isn't pushed out by all the powder I've stuffed under it.  ;D

Slim
NCOWS 2329, WartHog, SCORRS, SBSS, BHR, GAF, RBCS, Dirty RATS, BTBM, IPSAC, Cosie-in-training
I love the smell of Black Powder in the morning!

Offline Bristow Kid

  • I've got a touch of hangover beuracrate. Don't push me
  • Top Active Citizen
  • *
  • Posts: 724
  • Matthew(Matt) Bohach
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #4 on: January 10, 2007, 08:47:26 PM »
I use just enough crimp to hold the bullet firmly in place.

Bristow Kid
Prayer Posse
SCORRS
NCOWS #2540
Grand Army of the Frontier #437
Department of the Missouri
PWDFR #149
RATS #233
SASS #68717
WARTHOG

Offline Flinch Morningwood

  • Top Active Citizen
  • *
  • Posts: 346
  • Liked:
  • Likes Given: 1
Re: To Crimp or not to Crimp
« Reply #5 on: March 05, 2007, 03:52:42 PM »
I am thinking of getting the 457132 mould as well...you might try making up a batch of crimped and non-crimped - all else equal but the crimp.  Then go shoot them and see...you could even be so technical as to put an upper and lower target up and alternate the test groups so fouling would be fairly equal.

I am Shooting an EMF Pedretti Sharps so I'd be interested to know what works for you...
"I'll kill a man in a fair fight. Or if I think he's gonna start a fair fight."

- Jayne Cobb

Offline geo

  • Top Active Citizen
  • *
  • Posts: 171
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #6 on: March 11, 2007, 10:08:39 AM »
load my 50/70 with just enough crimp to keep the bullet in place. good luck, geo.

Offline Montana Slim

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1940
  • Liked:
  • Likes Given: 101
Re: To Crimp or not to Crimp
« Reply #7 on: March 22, 2007, 11:43:20 AM »
Another factor is whether you resize the neck...If you don't resize, you'll likely need some crimp (depending on bullet dia) to keep it from working itself out.

I resize and the bullet ain't gonna fall out, so I use just enough crimp to de-flare the mouth....makes chambering easier.

The preaparation of one's ammo will largely depend on what your'e intended use is......A good load for the ol' NCOWS buffalo match may not be ideal for BPCR match or a bullseye match

Slim
Western Reenacting                 Dark Lord of Soot
Live Action Shooting                 Pistoleer Extrordinaire
Firearms Consultant                  Gun Cleaning Specialist
NCOWS Life Member                 NRA Life Member

Offline Steel Horse Bailey

  • Jeff "Steel Horse Bailey" - BP Warthog & C&B Shooter
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 6164
  • A Master of the Sublime & Holy Order or the Soot
  • SASS #: 27463
  • NCOWS #: 1919
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #8 on: March 26, 2007, 10:04:24 AM »
Thanks for all replies.  I guess this means I'll be trying out both methods.  I wanted the opinions.  Seems like the BenchRest shooters generally don't crimp, but I'm not a BR capable person. 

Obviously, someone with a tube-fed Marlin would crimp.

Thanks again.
"May Your Powder always be Dry and Black; Your Smoke always White; and Your Flames Always Light the Way to Eternal Shooting Fulfillment !"

Offline Dakota Widowmaker

  • Top Active Citizen
  • *
  • Posts: 745
  • SASS# 65062
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #9 on: April 02, 2007, 12:01:37 AM »
Tuber feeders (i.e. "leverguns") need a roll crimp or a good neck resizing that extends BELOW the base of where you are going to seat your bullet by 1/4" inch or so.

My 45-90 and my 38-55 both like a nice even neck resize and a good clean roll crimp on a seperate die.

With either one, I generally have enough powder under the bullet so that bullet set-back is not an issue.

Offline mrbig6045

  • Citizen
  • *
  • Posts: 14
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #10 on: March 29, 2008, 08:34:35 PM »
i use a taper crimp on my 45-70 bp rounds,just to kinda hold round nose 500 grain bullet in place.dont know if it really needs it,but i think it looks better too :)

Offline HorsePen Henry

  • Horse Pen Henry aka M.T. Hulls
  • Top Active Citizen
  • *
  • Posts: 500
  • My Heroes Have Always Been Cowboys...and Indians.
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #11 on: March 30, 2008, 02:28:09 AM »
I use ta shoot 45-90 quite a bit with cast bullets and I always used a slight crimp. Not much, just enough ta keep the bullet from slipping out at a time when I don't need 'em to.
The more you read and observe about this Politics thing, you got to admit that each party is worse than the other. The one that's out always looks the best.
-Will Rogers-

The price of FREEDOM is in blood and money and time. Mostly in blood. It aint free.
Belly up to the bar and quit yer bitchin'. Be grateful to those who have paid the ultimate price.
-Horse Pen-

"Never squat with yer spurs on and never high five a baby after waffles."
-author unknown, but it coulda been Will Rogers-

NCOWS#3091
STORM #300

Offline Cyrille

  • Top Active Citizen
  • *
  • Posts: 842
  • "To sing, to laugh, to dream, cock my hat, or gun"
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #12 on: March 30, 2008, 11:06:25 AM »
Single shot rifle rounds aren't crimped by some shooters in BPCR matches some do crimp. I think it all comes down to personal preference or what the indiviual rifle likes best.
CYRILLE...  R.A.T. #242
"Never apologize Mr.; it's a sign of weakness."
Capt. Nathan Brittles {John Wayne} in "She Wore a Yellow Ribbon."

"A gun is  just a tool. No better and no worse than any other tool----- Think of it always in that way. A gun is as good--- and as bad--- as the man who carries it. Remember that."
                                                   Shane

Offline French Jack

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 903
  • Liked:
  • Likes Given: 0
Re: To Crimp or not to Crimp
« Reply #13 on: April 01, 2008, 05:55:15 PM »
The only rounds I crimp are the pistol and Spencer rounds.  All others I run in the die just enough to remove the bell from the neck expander.  I have had no  problems, and accuracy has never been affected.  Of, course, I'm not shooting them in a lever action, so no problem.  Come to think of it, with a case stuffed full of compressed 2F black, the bullet is not going in the case further.???-- and it is snug enough not to work loose.
French Jack

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com