Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => The Barracks => Topic started by: Dusty Tagalon on September 21, 2014, 02:59:15 PM

Title: 1895 Winchester Lee Navy
Post by: Dusty Tagalon on September 21, 2014, 02:59:15 PM
Picked up an 1895 Lee Navy today at auction. Project gun. (chopped to carbine). Missing extractor, & need to replace the firing pin. Anyone know of illustrated parts breakdown, or instructions for removing & installing the bolt? Further review, it is a cut down civilian model, lacks the NCT inspection stamp. I have seen pictures of the civilian model, sn only on the receiver.
This has 3 lines
U   .N.
sn 18xx
J    .J.

Figuring a lot out, need a sear spring also.

I guess for now, its a hall hanger, parts order on hold.

Thanks
Brian
Title: Re: 1895 Winchester Lee Navy
Post by: River City John on September 21, 2014, 03:59:45 PM
S&S Firearms had some parts, along with the reprint of the Gov't. manual.

RCJ
Title: Re: 1895 Winchester Lee Navy
Post by: River City John on September 22, 2014, 05:12:49 PM
http://www.joesalter.com/category/products/Commercial-Lee-Navy-Rifle


For fun.

RCJ
Title: Re: 1895 Winchester Lee Navy
Post by: River City John on September 26, 2014, 10:27:57 PM
Brian,
any success with S&S in finding parts?

RCJ
Title: Re: 1895 Winchester Lee Navy
Post by: sail32 on September 28, 2014, 11:57:23 AM
Years ago I had the US Navy ammunition belt and straps for the Lee Navy rifle, I forget how many clip pockets it had.

A picture of the blue webbing is shown here, my sample was obtained from Bannermans.

http://milpas.cc/rifles/ZFiles/United%20States%20Rifles/M1895%20Winchester-Lee/Winchester%201895%20rifle.html

Only the flaps were leather, the belt, shoulder straps and pouches were web.

http://milpas.cc/rifles/ZFiles/United%20States%20Rifles/M1895%20Winchester-Lee/WINCHESTER%20LEE%20NAVY%20RIFLE.jpg
Title: Re: 1895 Winchester Lee Navy
Post by: 6mm USN on October 23, 2014, 07:06:01 AM
Picked up an 1895 Lee Navy today at auction. Project gun. (chopped to carbine). Missing extractor, & need to replace the firing pin. Anyone know of illustrated parts breakdown, or instructions for removing & installing the bolt? Further review, it is a cut down civilian model, lacks the NCT inspection stamp. I have seen pictures of the civilian model, sn only on the receiver.
This has 3 lines
U   .N.
sn 18xx
J    .J.

Figuring a lot out, need a sear spring also.

I guess for now, its a hall hanger, parts order on hold.

Thanks
Brian


Try Forgotten Weapons.

http://www.forgottenweapons.com/wp-content/uploads/manuals/M1895-Navy-Lee-manual.pdf
http://www.forgottenweapons.com/wp-content/uploads/manuals/leehandbook.pdf


Yours was a Military rifle that some long gone human decided to change for not the better.  There were two inspectors for the Winchester Lee.  N.C.T. (Nathan C. Twinning) and J.N.J (John N. Jordan)

http://proofhouse.com/cm/us_inspector.htm

It could be the middle initals were worn/buffed off of your rifle by age or intent.

The top line should read U. S. N.

Six
Title: Re: 1895 Winchester Lee Navy
Post by: Captain Barrett on November 30, 2014, 05:10:37 PM
River,

I hope you are taking good care of yours...
Title: Re: 1895 Winchester Lee Navy
Post by: River City John on December 01, 2014, 08:39:22 AM
River,

I hope you are taking good care of yours...

Captain Barrett, someone made me an offer I couldn't refuse . . .

I had found a period bayonet for it, plus repro strap and reprint of the Govt. manual from S & S Ltd.. I was beginning to plan gathering shooting components when "the offer" came to me. I had put out some feelers to gauge interest and somebody bit.

RCJ

p.s. I have since put my effort towards acquiring a Swedish Mauser and reloading components, plus accoutrements to do a Boer impression. Just got my footwear the other day and am breaking them in.
Title: Re: 1895 Winchester Lee Navy
Post by: Ol Gabe on December 01, 2014, 09:21:31 AM
R.C.J., Kind Sir,
Always enjoy reading your posts.
Just curious, but unless I missed it in an earlier post, which format/militia are you going to do as an impression, the Norwegian/Swedish cadre that served in the Boer Wars or the Afrikaans contingent? Either way will be a grand historical endeavor!
Please post pics and all the data/research as you develop your personnae for same as those of us that can't get out much rely on those of you that can.
Best regards and good researching!
'Ol Gabe
GAF
Title: Re: 1895 Winchester Lee Navy
Post by: sail32 on December 01, 2014, 11:23:43 AM
I came across a book called, "The American Steel Navy", by John D. Alden, Commander, U.S. Navy (retired).

Excellent pictures covers the period from 1883 to 1909, with a few pictures of the Marines in Apia, Peking, and Seoul.

The pictures show some of their equipment, cartridge pouches and machine guns.
Title: Re: 1895 Winchester Lee Navy
Post by: Dusty Tagalon on December 01, 2014, 11:28:18 AM
A channel was cut through the top of the receiver, removing the S in U.S.N, & the N in J.N.J

Brian
Title: Re: 1895 Winchester Lee Navy
Post by: River City John on December 01, 2014, 02:27:21 PM
R.C.J., Kind Sir,
Always enjoy reading your posts.
Just curious, but unless I missed it in an earlier post, which format/militia are you going to do as an impression, the Norwegian/Swedish cadre that served in the Boer Wars or the Afrikaans contingent? Either way will be a grand historical endeavor!
Please post pics and all the data/research as you develop your personnae for same as those of us that can't get out much rely on those of you that can.
Best regards and good researching!
'Ol Gabe
GAF

Scandanavian Korps that served in Second Boer War.