61
Gunsmithing / Re: Making stag grips
« Last post by wildman1 on March 24, 2024, 07:04:04 AM »I made a set of elk grips for a set of rugers I have. They came out great. I used Birchwood filler and sealer then finished them with Birchwood Tru oil That I got from Brownells. I coated the inside of the grips with a good slow dry epoxy and used a hair drier set on low to get it to soak into the grain. The epoxy I used is about the same color as the grips and takes about two weeks to really set completely.
wM1
wM1