Cas City Forum Hall & CAS-L

CAS TOPICS => Gunsmithing => Topic started by: treebeard on October 14, 2020, 05:28:08 PM

Title: What is this tool?
Post by: treebeard on October 14, 2020, 05:28:08 PM
Came across this tool today while searching for something else . Do not know what it is for or. Hoping someone on this site will recognize it— looks cool!
Title: Re: What is this tool?
Post by: Major 2 on October 14, 2020, 06:02:46 PM
I see a sprocket spanner tool   ...I think its a vintage combo tool for a bicycle
Title: Re: What is this tool?
Post by: River City John on October 14, 2020, 09:03:46 PM
Vintage automobile tool? Model "A" or "T"?
Title: Re: What is this tool?
Post by: Coffinmaker on October 15, 2020, 09:54:13 AM

 :)  Oh Cummon Guys   ;)

Most everyone should recognize a Thingamajig Whatzit.  Sheesh.  So Simple even a Caveman ............



(Snicker)

(Snicker)

(Snicker)
Title: Re: What is this tool?
Post by: Im2bent on October 15, 2020, 06:13:56 PM
never bet against the Major.
https://www.google.com/url?sa=i&url=https%3A%2F%2Fwww.worthpoint.com%2Fworthopedia%2F10-vintage-bicycle-tool-kit-spanners-695680577&psig=AOvVaw3KEzKqbLKB-Kg7jKpWDL70&ust=1602889926491000&source=images&cd=vfe&ved=0CAIQjRxqFwoTCIiP-8fct-wCFQAAAAAdAAAAABAJ
Title: Re: What is this tool?
Post by: 38OVI on October 15, 2020, 08:37:55 PM
Not a tool for a Model T  or  A, looks sort of a water pump wrench, but too many other slots, etc., to be for one of those vehicles. I have one each for my T and A Models, and they do not look like this one.
Title: Re: What is this tool?
Post by: River City John on October 15, 2020, 11:45:38 PM
38OVI and Im2bent, you just damaged my perfectly good wild guess, pulled out of a very respectable hat obtained from thin air . . .

RCJ
Title: Re: What is this tool?
Post by: Coffinmaker on October 16, 2020, 08:46:17 AM

 :(  Me Too RCJ   :)  Me Too.

I'm crushed I tell ya.  Just smashed to the turf as it twer.  But and however, betting against the Major is mostly a loosing preposition.

Live Long and Prosper
Title: Re: What is this tool?
Post by: August on October 17, 2020, 12:50:52 PM
Well, now that Major did the heavy lifting, I'm seeing a bottom bracket maintenance tool for an english or french bicycle.  It has a spanner to remove the bottom bracket bearing retainer rings, a crank retainer bolt 'socket' (the square hole), a tapered fork for forcing the cranks off the crankshaft, a serrated fitting for holding the main shaft (which is splined) or chasing the splines to clean them, and a pedal bolt wrench at the top end.  Sometimes splined crankshafts would have opposing flats inboard of the cranks, which might explain the wrench-like fitting at the bottom of the 'fork'.  This tool would have to be supplemented with a hammer, so it is unlikely it was intended for carrying on the bike.

(addendum:  Only the least expensive bicycles use this kind of construction today.  But, this type of crank used to be practically universal.)
Title: Re: What is this tool?
Post by: Major 2 on October 17, 2020, 02:44:45 PM
....Marshall did the heavy lifting  ???

Title: Re: What is this tool?
Post by: August on October 17, 2020, 05:05:52 PM
....Marshall did the heavy lifting  ???

Oops!!!  Sorry.  Corrected.   

This is why I never get invited back anywhere!

All the best.
Title: Re: What is this tool?
Post by: Abilene on October 17, 2020, 06:59:35 PM
Well, coincidence.  I was hunting for a magnet bar for tools amongst my junque, and in a plastic tool box of box end wrenches I bought 25 years ago at a garage sale I found a multi-tool that is very similar to the ones shown and linked.   I had no idea it was in there.  :)  You'd think the manufacturers might stamp some ID on them, but I guess they save a few cents by not.
Title: Re: What is this tool?
Post by: Claypipe on August 01, 2021, 11:54:59 AM
Came across this tool today while searching for something else . Do not know what it is for or. Hoping someone on this site will recognize it— looks cool!

I can't put my finger on it. But, it seems that I have seen this spanner before. It falls somewhere in either Machine gun or Bicycle repair category. Definitely vintage with that square nut hole.

As for the lack of markings, for Bicycle, yes it was to save on production cost, tooling up a stamp was costly even then. For machine gun production, it too was to save on production cost, but also to preserve national secrets and prevent against sabotage and factory bombings.

Automotive and Cast Iron stove multi tools were made generally of cast steel aka fluid steel tor forged steel.