Author Topic: Winchester 1866 Question  (Read 4044 times)

Offline Vance Beckett

  • Active citizen
  • *
  • Posts: 40
  • Liked:
  • Likes Given: 0
Winchester 1866 Question
« on: March 15, 2006, 10:21:00 PM »
I also posted this on the STORM board, but I figgered ya'll might know something about the matter, so just to cover all my bases...  :)

Pards, I'm in a pickle. 

I finally saved up enough greenbacks to purchase a Winchester 1866 replica from Cimarron Arms, chambered for .44 Special.  I decided to triple check with one of their techs as to whether or not the .44 Colts would function reliably through the rifle.  According to the gentleman I spoke with...  they will not.  He said that due to the shortness of the cartridges, neither .44 Colt or .44 Russian would cycle through the rifle's action worth a darn.  OH, the rounds could be chambered (I assume he meant by hand, one round at a time), but as far as levering into and out of the chamber, the tech said it wouldn't happen unless the rifle was modified by a competent gunsmith.  He gave me the name of one whom he recommended, and I'm waiting on a reply from the 'smith right now.

I honestly don't know what to do.  I've gotten so much different information on the topic, that I'm confused as all get out now.  Will the .44 Special rifle cyle the .44 Colt/Russian rounds reliably or not?  With or without gunsmithing?  I'm sure you all can understand how frustrating it is.    I was really planning on shooting the .44Colt/Russians through my Open-Tops and the '66...

Anyone have any advice or personal experience in this matter they'd like to share?  Gunsmith's they know who might do the work?  I was really heartened by US Scout's post regarding his use of the '66 and .44Colt, but now that I've spoken with the Cimarron tech, I'm as crushed and crumpled as old Gus MacRae's hat (and as confused as Pea Eye Parker)  ! 

Thanks in advance.
STORM #185

Offline Capt. Augustus

  • Top Active Citizen
  • *
  • Posts: 248
  • Liked:
  • Likes Given: 0
Re: Winchester 1866 Question
« Reply #1 on: March 16, 2006, 07:45:30 AM »
My experience has been individual guns are different.  I had a 73 in .45 that would not feed Schofields too well, and then the extractor would take a big bite out of the rim.  Later I bought a Henry and it feeds the Schofields as good as it does the .45 LC.  The biggest difference that I can see is the front of the carrier is cut back more and it is angled to push the shorter round back into the magazine when the elevator rises.

Offline Driftwood Johnson

  • Driftwood Johnson
  • Top Active Citizen
  • *
  • Posts: 1885
  • Liked:
  • Likes Given: 0
Re: Winchester 1866 Question
« Reply #2 on: March 16, 2006, 04:08:52 PM »
Toggle link guns are notorious for being Over All Length sensitive. My own '73 in 44-40 only likes rounds that are .010 or .020 over the Max length listed in most manuals. Any shorter, and it doesn't like to feed them.

Here's what happens in a toggle link gun like a Henry, '66 or '73. When the magazine spring forces a round out of the tube and onto the cartridge elevator, the only thing holding the next round in the tube is the round already on the carrier. More recent designs have a mechanism that keeps the next round in the tube, but with a toggle link, it is the round on the elevator that is blocking the next round from coming out. The round on the elevator is forced to the rear by the spring pressure of the rounds in the tube. The round on the elevator butts up against the rear wall of the well in the receiver that houses the elevator. So the shorter the round on the elevator is, the more of the next round can poke out of the tube. Some amount of the next round always pokes out, because the round on the elevator must be slightly shorter than the overall length of the elevator, in order for the bullet not to snag on anything as it rises in the elevator to the level of the chamber. So the longer the round on the elevator is, the less the next round will intrude into the elvator area, and the shorter the round on the elevator is, the more will intrude. Are you with me so far?

Now Mr Henry was no dummy, so he incorporated a chamfered face on the front edge of the elevator. The purpose of this chamfer is to sweep that protruding round back into the magazine as the elevator rises past, allowing the elevator to slide by with the round it is raising up to chamber level. But there is only so much space available on the elevator for this chamfer, and so there is a limit to how much a cartridge can protrude out of the tube. Too much poking out and the chamfer does not sweep the round back into the tube, but instead, the carrier simply jams against the offending round. Generally speaking, most carriers can be relied on to sweep a round back in that is protruding about as much as the thickness of a rim, but not too much more. So the length of the round on the elevator governs how well the elevator can slide by the magazine without getting caught.

It is possible to alter that chamfer so that it can sweep back a round intruding too far. But there is only so much material available to alter. If the round protrudes too far, the chamfer simply cannot be altered to accomodate it.

Instead, Over All Length of the cartridge has to be set at an amount that will keep the round in the tube from poking out too much.

Uberti rifles have varied over the years in these critical dimensions. Sad but true. As I said earlier, a 44-40 1.592 long, the book Max, will tend to jam up my '73. But if I seat the bullet out so that the round is 1.602, or even slightly more, the gun works like greased lightning. I have altered that chamfer as much as I possibly can, now it's all up to OAL. My gun is an old one, made in the 1980s, and it is a little bit unusual in this regard.

I'm not familiar enough with the 44 Colt round to give you a definitive answer, but it sounds like the round teeters on the hairy edge of uncertainty regarding reliably feeding through a toggle link. It is entirely possible that by loading them long enough, you might get them to feed reliably without any alteration of the gun. You will want to be sure you use a bullet that allows crimping in the crimp groove however, since lacking a strong crimp the bullets may get forced back into the cases by the strength of the magazine spring. I found this problem when I started loading some extra long dummy 44-40 rounds for my '73, but with them stuffed full of Black Powder the bullet has no place to slide back when I run live rounds through it.

Since it sounds like you already own the Open Tops, would it really be so terrible if you shot the 44 Colts in them and shot the rifle with the 44 Sp rounds it was chambered for? I've been shooting 2 different calibers in CAS since day one and if I can keep things straight, anybody can. You may find that you can shoot th 44 Colt rounds, you may find that you need to stick with the Specials. Just how much is the difference between the recommended Max OAL of the 44 Colt rounds and the Max OAL of the Special rounds, anyway? Like Capt Augustus said, some 45 Colt toggle links will feed 45 Schofields, some will not. They're not quite all the same.
That’s bad business! How long do you think I’d stay in operation if it cost me money every time I pulled a job? If he’d pay me that much to stop robbing him, I’d stop robbing him.

Ya probably inherited every penny ya got!

Offline Will Ketchum

  • Chief of Detectives
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 2794
  • Pete Ersland
  • SASS #: 4222
  • NCOWS #: 133
  • Liked:
  • Likes Given: 0
Re: Winchester 1866 Question
« Reply #3 on: March 16, 2006, 05:37:58 PM »
Vaughn Trueman of "The Bullet Hole can alter your 66 to feed the Russians.  He did both my Henry and 66.  He told me he just adjusts the "angle of the dangle".  You can e-mailhim at thebullethole@mchsi.com or call him at 319-233-0204.  He has had some health problems but I think he is back working.

Tell him I sent you....he'll prbably charge you double ;)

Will Ketchum
Will Ketchum's Rules of W&CAS: 1 Be Safe. 2 Have Fun. 3  Look Good Doin It!
F&AM, NRA Endowment Life, SASS Life 4222, NCOWS Life 133.  USMC for ever.
Madison, WI

Offline Vance Beckett

  • Active citizen
  • *
  • Posts: 40
  • Liked:
  • Likes Given: 0
Re: Winchester 1866 Question
« Reply #4 on: March 16, 2006, 06:26:01 PM »
Driftwood-
.44Colt with a 200gr bullet runs at about 1.37", while .44Special with the same bullet goes out to 1.45" (according to the Trail Boss load data I have).  I'm becoming a bit more skeptical about the feed issue.

Will-
Thanks for the link to Mr. Trueman.  :)
STORM #185

Advertisers

  • Guest
Re: Winchester 1866 Question
« Reply #5 on: Today at 11:47:34 AM »

Offline Driftwood Johnson

  • Driftwood Johnson
  • Top Active Citizen
  • *
  • Posts: 1885
  • Liked:
  • Likes Given: 0
Re: Winchester 1866 Question
« Reply #5 on: March 17, 2006, 09:49:03 AM »
A difference of .080 is a lot to ask of a toggle link rifle out of the box. That's probably why the guy at Cimarron was so adament. Adding .080 with the right bullet might not be such a big deal, although I have no experience with that round. But doing that, you might wind up shooting different length rounds in your rifle an pistol anyway.
That’s bad business! How long do you think I’d stay in operation if it cost me money every time I pulled a job? If he’d pay me that much to stop robbing him, I’d stop robbing him.

Ya probably inherited every penny ya got!

Offline Sir Charles deMouton-Black

  • THE ANCIENT SUBSTANCE ENDURES - ALL LESSER PROPELLANTS SHALL FIZZLE
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 6130
  • Liked:
  • Likes Given: 182
Re: Winchester 1866 Question
« Reply #6 on: March 18, 2006, 12:20:26 AM »
My 1866 is in .38 Spl.  I have watched how it deals with rounds of different lengths.  The front of the Cartridge Lifter is sloped, and it merely pushes the following round back into the magazine as it lifts one into the loading position.  Mine is quite tolerant of varying lengths of cartridge.

As I've seen mentioned in a couple of GOTOW articles, .44 Colt works OK.  After all it is only 1 sixteenth of an inch shorter than a .44 Spl.  If it doesn't work, find a bullet that gives a slightly longer OAL. 

I'd say, get it.
NCOWS #1154, SCORRS, STORM, BROW, 1860 Henry, Dirty Rat 502, CHINOOK COUNTRY
THE SUBLYME & HOLY ORDER OF THE SOOT (SHOTS)
Those who are no longer ignorant of History may relive it,
without the Blood, Sweat, and Tears.
With apologies to George Santayana & W. S. Churchill

"As Mark Twain once put it, “History doesn’t repeat itself, but it does rhyme.”

Offline Wolfgang

  • Top Active Citizen
  • *
  • Posts: 1343
    • The Desperate Hot Springs News
  • Liked:
  • Likes Given: 0
Re: Winchester 1866 Question
« Reply #7 on: March 18, 2006, 06:36:19 AM »
Driftwood,   Thanks for posting good useful information about feed/ lifter problem with togle link action.  I ain't got one of them thangs now. But will have one at some future time.  Coppied and stored the info for future reference.  Good shootin', . . . .  :)
Beware the man with one gun, he probably knows how to use it.

 

SMF spam blocked by CleanTalk

© 1995 - 2021 CAScity.com