Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => STORM => Topic started by: Slamfire on March 09, 2013, 10:36:43 PM

Title: 72 OT ejector rod ,,,to short????
Post by: Slamfire on March 09, 2013, 10:36:43 PM

 I'm still honi'n on my 72 ,its a .38 spl. ,the ejector  rod "IS TO SHORT",and has a notch at the front ( it catches and bugs the heck out ofme),Have  any of ya'll made the rods longer or rebuild the whole works,??? This gun shoots right on ,its a great piece,i hope a few personal changes  will make it even greater.






Hootmix.

Title: Re: 72 OT ejector rod ,,,to short????
Post by: Major 2 on March 10, 2013, 06:21:11 AM

You may want to do a search on this topic.
 Seems to me I recall , a few of the first batch had short ejectors,
Uberti replace them at no cost.

I did not have the issue, so my memory is lacking on that subject. Someone else may chim in  :)

Title: Re: 72 OT ejector rod ,,,to short????
Post by: Flint on March 10, 2013, 03:00:41 PM

The notch in the ejector housing is a PITA, so I filed it off.  I'm not sure why Uberti put it there, an answer to a problem no-one had.  Having to lift the rod to turn it is ridiculous.    Short I haven't seen, and I have 8 assemblied on spare 71 barrels and converted 51's, none of which is less than 6 years old..

Title: Re: 72 OT ejector rod ,,,to short????
Post by: Slamfire on March 10, 2013, 05:14:20 PM

Hey pards,,,Flint  ya,i'm going to file my notch out,, off you know,, fix it.

Seth,,the rods won't push the cases clear of the cyl., 1/8"- 3/16" to short.

Major,,need help to under stand "timing" do i need a new therad for this topic???



 Hootmix.

Title: Re: 72 OT ejector rod ,,,to short????
Post by: Major 2 on March 10, 2013, 05:22:50 PM

If you want it found under " help to under stand "timing"   then yeah, start a new thread  :)

if you just want to continue this discussion you may have less responce  :)

Title: Re: 72 OT ejector rod ,,,to short????
Post by: Abilene on March 10, 2013, 05:33:39 PM

Quote from: Flint on March 10, 2013, 03:00:41 PM

... I'm not sure why Uberti put it there, an answer to a problem no-one had...

The question should be, why did Colt put it there?

As for the rod being too short to eject the shells fully, most folks find that the empties, if they don't fall from the cylinder from gravity, will eject if given a jab from the rod.  If they stick that last little bit, it may mean one of: ammo too hot, ammo too dirty, chambers need polishing or even just cleaning.

Title: Re: 72 OT ejector rod ,,,to short????
Post by: Slamfire on March 10, 2013, 05:46:25 PM

Abilene,,you are ,,correct, i posted this topic ,,then i resized these nickel cases,,,yup, out they ,,fell ( gravity),,.




 Thanks all.  Hootmix.

Title: Re: 72 OT ejector rod ,,,to short????
Post by: Abilene on March 10, 2013, 06:49:21 PM

A resized case should always fall out of any chamber.  The proof will be if they are still sticky after being fired in that gun.