Special Interests - Groups & Societies > The Winchester Model 1876
Loading Data for the 50/95WCF
King Medallion:
Word is Goex will be shipping within the next month or so.
Buck Stinson:
I have had several original 76's in .50 Express. My load is with a lead bullet cast from an original Winchester bullet mold. It comes out at .513 and I size to .512 (bore diameter). Shoots with awesome accuracy using resized .348 brass and 80 grains of 2f black. Just my opinion.
ndnchf:
--- Quote from: Buck Stinson on April 24, 2023, 05:54:58 PM ---I have had several original 76's in .50 Express. My load is with a lead bullet cast from an original Winchester bullet mold. It comes out at .513 and I size to .512 (bore diameter). Shoots with awesome accuracy using resized .348 brass and 80 grains of 2f black. Just my opinion.
--- End quote ---
Bore diameter .512"? What was the groove diameter? That soft bullet must bump up nicely.
Advertising:
DrummerBoy:
Please help! Very clumsy trying to attach photo of calipers and slug
DrummerBoy:
Whew! Finally got an acceptably sized photo of my dilemma: a rather larger slug size than those I’ve seen mentioned…all I can think to do is to get accurate to increase the size of a mold to .518 and then get a .517 sizer.
Any advice/criticism would be greatly appreciated!
Thanks,
DB
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version