Author Topic: Heeled Bullets - please don't call me lazy...  (Read 1575 times)

Offline Snake Oil

  • Snake Oil
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 174
  • A day shooting is good for what ails ya!
  • NCOWS #: L-198
  • GAF #: 889
  • Liked:
  • Likes Given: 44
Heeled Bullets - please don't call me lazy...
« on: January 16, 2022, 05:37:43 PM »
I have done some quick searching and have found a lot of different threads, but all are lacking a couple pieces I would like to see in simplicity...

I am looking to do 38 long colt heeled bullets... aiming for more period correct... I have an s&w 1899 in 38 military and two 1858 with Taylors conversion cylinders...

I have a hollow based mold from mp molds... outstanding mold, touchy and cull rate is unfavorable.  I am loading those up currently to test, but am finding I may not be very successful.

I have found Old West Bullet Molds
(https://oldwestbulletmoulds.com/shop/ols/products/38-colt-mould-and-crimp-die-set)
I saw on another thread liquid alox as a lube option.

I'm curious if you get a conical mold and pan lube and then seat the bullet and then resize the whole case similar to the process listed by duelist1954 on YouTube would that crimp the brass into the lead and then give you an internal lubed bullet.  Is this an oversimplification or am I overthinking this?  I have read several threads that all seem to state the same thing over and over, so the lazy side of me came out to see if someone would respond to my query.

If this method works, then a cheap lee conical die is way cheaper than a custom mold.

Thoughts and help please!
A day shooting is good for what ails ya!

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4831
  • Liked:
  • Likes Given: 18
Re: Heeled Bullets - please don't call me lazy...
« Reply #1 on: January 16, 2022, 06:56:02 PM »
Leave heeled bullet unlubed.  Size, prime, powder, seat bullet, then crimp with OWBM crimp die.  Then dip the bullet into a pan of melted lube.  That's it.  I use straight paraffin wax for heeled bullets.

 I think you are mixing up two different processes.  Hollowbase bullets are lubed and loaded conventionally.  Heeled bullets are loaded and lubed as above.

You cannot use a sizing die to "Crimp" the bullet.  It will swage down the bullet inside the case and leave it loose.

This video? 
Civilize them with a Krag . . .

Offline Drydock

  • MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4831
  • Liked:
  • Likes Given: 18
Re: Heeled Bullets - please don't call me lazy...
« Reply #2 on: January 16, 2022, 07:19:31 PM »
I use Accurate for most of my molds, with this being my go to .38 Heeled bullet https://accuratemolds.com/bullet_detail.php?bullet=38-120C

But Accurate has a number of heeled designs.  A bit less pricy than OWBM, though you do need his crimp die! (I have 2 of  them, for 38s, and .44s) 
Civilize them with a Krag . . .

Advertising

  • Guest
Re: Heeled Bullets - please don't call me lazy...
« Reply #3 on: Today at 03:33:53 PM »

Offline Snake Oil

  • Snake Oil
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 174
  • A day shooting is good for what ails ya!
  • NCOWS #: L-198
  • GAF #: 889
  • Liked:
  • Likes Given: 44
Re: Heeled Bullets - please don't call me lazy...
« Reply #3 on: January 16, 2022, 08:22:19 PM »
Drydock to the rescue!!  Thank you sir!!

I had not found anything on the lubing of bullets and was not looking forward to lead issues, so thank you!! 

I had perused accurate earlier today... I will look at that mold again!  Mr. Bellevue has put out several videos, that is the third one I found today on heeled bullets... I sure appreciate officianados putting their knowledge out there, including yours Drydock!
A day shooting is good for what ails ya!

Offline AntiqueSledMan

  • Very Active Citizen
  • *
  • Posts: 81
  • Liked:
  • Likes Given: 40
Re: Heeled Bullets - please don't call me lazy...
« Reply #4 on: January 17, 2022, 04:28:30 AM »
Hello Snake Oil,

I've been loading all my Cartridge Conversions with Black MX and non-lubed bullets.
Of course Black MZ is no longer available, but it's basically the same as American Pioneer Powder.
Also Shooters World has a product called Multi Purpose Black which is the same stuff.

AntiqueSledMan.

Offline Baltimore Ed

  • Top Active Citizen
  • *
  • Posts: 1850
  • SASS #: 11754
  • Liked:
  • Likes Given: 189
Re: Heeled Bullets - please don't call me lazy...
« Reply #5 on: January 17, 2022, 09:00:44 AM »
After seating i ran them upside down through my lubrisizer to crimp the case to the bullet and lube the bullet.
"Give'em hell, Pike"
 There is no horse so dead that you cannot continue to beat it.

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: Heeled Bullets - please don't call me lazy...
« Reply #6 on: January 17, 2022, 10:25:19 AM »

 :)  WOWZERS !!!  ;)

Thank You Thank You thank You Sled Man.  I've been wracking my feeble brain trying to remember who was now marketing the newly relabeled Black MZ.  Tiz Shooters World.  The formulation is a tad different though, "slightly" smaller granulation is reported.  Don't quote me on that, no personal knowledge of the granule size.

People Are Hazardous to Yer Health

Offline ndnchf

  • Top Active Citizen
  • *
  • Posts: 1419
  • Liked:
  • Likes Given: 1
Re: Heeled Bullets - please don't call me lazy...
« Reply #7 on: January 19, 2022, 06:05:32 PM »
I shoot a lot of heel bullets in .32, .38 and .44 rifles. My .32s I tumble lube in 50/50 JPW/alox, then seat and crimp them. The 38s and 45s I use an old time factory heel bullet lube, dipping the bullet after loading. They shoot very well. BTW, you can buy heel bullets from Bernie at Old West.  His heel crimp dies are great. I have 4 or 5 of them.
"We're all travelers in this world.  From the sweet grass to the packing house, birth till death, we travel between the eternities"  Prentiss Ritter, Broken Trail

Offline Hoof Hearted

  • Cartridge Conversion Specialist
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 1734
  • If your not an FFL you’re not a gunsmith
    • Cartridge Conversion
  • SASS #: 8038
  • NCOWS #: 3809
  • Liked:
  • Likes Given: 0
Re: Heeled Bullets - please don't call me lazy...
« Reply #8 on: January 25, 2022, 09:59:33 AM »
This has been a “sticky” here since March of 2018……SMH

https://www.cascity.com/forumhall/index.php?topic=41633.0
Anonymity breeds bravado.......especially over the internet!
http://cartridgeconversion.com
http://heelbasebullet.com
aka: Mayor Maynot KILLYA SASS #8038
aka: F. Alexander Thuer NCOWS #3809
STORM #400

Offline Snake Oil

  • Snake Oil
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 174
  • A day shooting is good for what ails ya!
  • NCOWS #: L-198
  • GAF #: 889
  • Liked:
  • Likes Given: 44
Re: Heeled Bullets - please don't call me lazy...
« Reply #9 on: January 26, 2022, 10:35:07 PM »
Also found this...

https://1858remington.com/index.php?topic=11283.0

This has the conical mold I was referencing, so I wasn't too far off, I believe it recommends sizing the bullet using a "pincher" sizer.

And the dipping of finished cartridge in lube of paraffin or otherwise fills the void I was trying to fill.

I really appreciate all the help!!
A day shooting is good for what ails ya!

Offline Professor Marvel

  • purveyor of useless items to the gentry
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 3081
  • learn from the past, or be doomed to repeat it
  • Liked:
  • Likes Given: 1118
Re: Heeled Bullets - please don't call me lazy...
« Reply #10 on: January 27, 2022, 03:45:57 AM »
This has been a “sticky” here since March of 2018……SMH

https://www.cascity.com/forumhall/index.php?topic=41633.0

Hey Hoof!
You are still above ground!
Good to see you posting!!!!

Prof Marvel
Your Humble Servant
~~~~~Professor Algernon Horatio Ubiquitous Marvel The First~~~~~~
President, CEO, Chairman,  and Chief Bottle Washer of


Professor Marvel's
Traveling Apothecary
and
Fortune Telling Emporium


Acclaimed By The Crowned Heads of Europe
Purveyor of Patent Remedies, Snake Oil, Powder, Percussion Caps, Cleaning Supplies, Dry Goods,
and
Picture Postcards

Offering Unwanted Advice for All Occasions
and
Providing Useless Items to the Gentry
Since 1822
[
Available by Appointment for Lectures on Any Topic


Offline Snake Oil

  • Snake Oil
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 174
  • A day shooting is good for what ails ya!
  • NCOWS #: L-198
  • GAF #: 889
  • Liked:
  • Likes Given: 44
Re: Heeled Bullets - please don't call me lazy...
« Reply #11 on: January 27, 2022, 05:51:12 AM »
I realize powder coating is a fad, but wouldn't that be an acceptable "lube" (not a lube but a coating that would reduce lead fouling) alternative fo heeled bullets?

Though the addition of a "shell" to the bullet would Chad its dimensions therefore would probably not allow it to fit as nicely in the cylinder.
A day shooting is good for what ails ya!

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: Heeled Bullets - please don't call me lazy...
« Reply #12 on: January 28, 2022, 09:05:50 AM »

 :)  Snake Oil  ;)

Referencing Powder Coating as a "Lube."   It's going to depend on your propellant.  Shooting powder coated bullets with that heathen Fad Smokeless may be well acceptable.  Shooting powder coated bullets with APP based Subs will work a treat since APP based subs require NO lube at all. 

Shooting Powder Coated bullets with Black Powder may be somewhat less than optimum.  Not necessarily a Harmonious outcome.  The powder fouling from Black Powder is cumulative and as firing continues, the fouling hardens severely and will completely fill the grooves.  The prime purpose of BP Lube is to keep the BP fouling soft enough to deal with.  While Powder Coat may (or may not) help with leading, is will not help with BP fouling.

The short answer is . . TA DA . .  Your stuck with using a lube.  Unless shooting APP based Subs.

Play Safe Out There
Avoid People.  They be Hazardous to Yer Health

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com