Cas City Forum Hall & CAS-L
CAS TOPICS => The Leather Shop => Topic started by: 67flh on January 08, 2020, 07:28:41 PM
-
I have my first holster under my (excuse the pun) belt. The natural progression of things dictates putting together a cartridge belt. Thanks to unlimited information available on the internet particularly "CAS" and a desire to try something new I have arrived at this point with my belt. If I had to say I had a favorite old West Leather Master it would be F.A. Meanea from Cheyenne. From the first time I saw one of his high backed saddles I was hooked on his work. I have attached a pic of my first attempt at making a cartridge loop. At the present I only have large needles and heavy thread. I have two punches, trust me when I say I will be using the smaller angled chisel punch when I start to actually do the loops on the belt. There is a real learning curve involved in leather work and I am a firm believer in practice makes perfect. For all of you who have contributed much to my education THANK YOU!
-
That's going to be a fine belt. You may want to consider putting another stitch off each end of your stitch lines to secure the loop to the belt. This photo isn't great but it shows you the idea. This belt has seen hard use and the stitches are holding just fine.
-
Looks to me as though you're coming along just fine. You'll find no lack of pards here to offer assistance.
-
Will, took your advice as to adding stitches and I can see where that is advantageous. I am only going to add 20 loops that should be more than enough.
-
That looks good. Those should do fine. Looking forward to seeing the finished belt.