Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => SCORRS => Topic started by: Rube Burrows on October 24, 2020, 07:47:14 AM

Title: Finally Joined the SCORRS
Post by: Rube Burrows on October 24, 2020, 07:47:14 AM
Well, I have finally done it. Finally picked up a pair of Remington New Model Armies.

I have enjoyed shooting my whole life and black powder for many years but for one reason or another I just never picked up a Remington. I have several Colt style from the 1851, 60 and 61 but just never seemed to come across the Remingtons. Now I have a pair.

Seen these the other day. They are unfired but have had the springs changed in them. They will be shot after this weekend though.  ;D

Sorry for the low quality photos. I have the hardest time with the photo sizing here.
Title: Re: Finally Joined the SCORRS
Post by: Rube Burrows on October 24, 2020, 07:58:21 AM
Mine is obviously the Sherriff Model
Title: Re: Finally Joined the SCORRS
Post by: Marshal Will Wingam on October 24, 2020, 10:51:13 AM
That's a nice pair, Rube. Congratulations. Ubertis, Piettas?
Title: Re: Finally Joined the SCORRS
Post by: Rube Burrows on October 24, 2020, 05:09:49 PM
That's a nice pair, Rube. Congratulations. Ubertis, Piettas?

These are Pietta.

I shot them today and can’t believe how well they l and how good they shoot. I actually may have liked them better than my Colt cap n balls. Shhhhhhh
Title: Re: Finally Joined the SCORRS
Post by: Marshal Will Wingam on October 24, 2020, 07:35:50 PM
Thanks. Pietta quality is up there these days. I've thought about going with ont next time I get the yank for an NMA.

I like the way you can fine tune the spring with the tension screw.
Title: Re: Finally Joined the SCORRS
Post by: Rube Burrows on October 26, 2020, 05:52:06 PM
Thanks. Pietta quality is up there these days. I've thought about going with ont next time I get the yank for an NMA.

I like the way you can fine tune the spring with the tension screw.


After another day of shooting today I think these two are my favorite black powder pistols now. They are very accurate and easier to acquire a sight picture compared to the Colt style.

I do think that if I am going to be shooting more black powder I would like to find me one of the stands to make loading easier.

These guns are a hoot! ;D ;D
Title: Re: Finally Joined the SCORRS
Post by: Marshal Will Wingam on October 26, 2020, 06:20:57 PM
Congratulations. Sounds like they work good for you. I like mine. They point better than anything else I've tried.

You really want to have a snort, shoot a whole match with one pistol and several cylinders, Pale Rider style. I did that for one annual match. My times sucked but it was a lot of fun.
Title: Re: Finally Joined the SCORRS
Post by: Rube Burrows on October 26, 2020, 08:13:20 PM
Congratulations. Sounds like they work good for you. I like mine. They point better than anything else I've tried.

You really want to have a snort, shoot a whole match with one pistol and several cylinders, Pale Rider style. I did that for one annual match. My times sucked but it was a lot of fun.

Yeah, that would be a lot of fun. I'm no speed racer anyways though.
Title: Re: Finally Joined the SCORRS
Post by: Marshal Will Wingam on October 27, 2020, 11:23:12 AM
Yeah, that would be a lot of fun. I'm no speed racer anyways though.
I slammed this rig together for the occasion. It worked quite well. If I had been thinking, I would have made two spare cylinder holders so I could put the empty away before grabbing the other one.

(https://i.imgur.com/mHj3hrk.jpg)

I put a hole in the bottom of the cylinder holder so I could push the cylinder up with my finger from the bottom if I wanted to.
Title: Re: Finally Joined the SCORRS
Post by: Coffinmaker on October 27, 2020, 12:26:22 PM

 :) SWEET!!  ;)

Just plain SWEET!! (I don't like Remingtons)
Title: Re: Finally Joined the SCORRS
Post by: Rube Burrows on October 27, 2020, 02:31:59 PM
I slammed this rig together for the occasion. It worked quite well. If I had been thinking, I would have made two spare cylinder holders so I could put the empty away before grabbing the other one.

(https://i.imgur.com/mHj3hrk.jpg)

I put a hole in the bottom of the cylinder holder so I could push the cylinder up with my finger from the bottom if I wanted to.


Nice looking rig.
Title: Re: Finally Joined the SCORRS
Post by: Rube Burrows on October 27, 2020, 02:32:58 PM
:) SWEET!!  ;)

Just plain SWEET!! (I don't like Remingtons)

I never thought I would. I think the Colts are a more elegant looking group of firearms but I can't deny these Remingtons feel good and shoot good.
Title: Re: Finally Joined the SCORRS
Post by: Marshal Will Wingam on October 27, 2020, 08:07:35 PM
Thanks. They can be a love/hate situation. I like the feel of a Colt open top but the Remingtons just shoot where I point them without any thought.
Title: Re: Finally Joined the SCORRS
Post by: 38OVI on October 27, 2020, 09:32:50 PM
There is a cylinder loading press on the S&S Firearms website.  Look under reloading.
Title: Re: Finally Joined the SCORRS
Post by: Rube Burrows on October 28, 2020, 09:11:19 AM
There is a cylinder loading press on the S&S Firearms website.  Look under reloading.

Thanks.