Author Topic: Original nipple wrench  (Read 883 times)

Offline bear tooth billy

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1035
  • NCOWS Senator
  • Liked:
  • Likes Given: 51
Original nipple wrench
« on: April 27, 2022, 07:17:10 PM »
I recently got an original 51 Navy, first thing took it to my gunsmith and
he agreed it is very good condition and encouraged me to shoot it. But first
he said to make sure I can get the nipples out for proper cleaning. I may or
may not shoot it, but would like to get the nipples out. The cylinder is soaking
for a week. Question what nipple wrench will fit these the best? Thanks

               BTB
Born 110 years too late

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: Original nipple wrench
« Reply #1 on: April 28, 2022, 07:25:22 AM »

 :)  Billy  ;)

Take a look at "Track of The Wolf" or even Slix.

If the nipples are seized, you may want to make a "board."  Half in thick piece of wood, drilled for a dowel the same size as the Arbor hole, and a second dowel, the same size as the chamber, to hold the cylinder solidly as you work on the nipples.

Play Safe Out There

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com