Recent Posts

Pages: 1 2 3 4 5 6 [7] 8 9 10
61
The Darksider's Den / Re: Who is our Cas City resident Cap & Ball guru?
« Last post by hellgate on January 28, 2023, 10:02:39 PM »
R Rio,
CCI are OK. They are just not as forgiving as the Remington caps as to how many different makes of nipples they will fit. The CCIs as well as the RWS are fairly stiff in the shank and are harder to swage onto the nipple while seating if the nipple is a bit big compared to the Remington cap that is scalloped on the mouth and will more easily swell to grip the cap. I have 16 C&B for now (have owned about 35) and by swapping out the nipples with Uncle Mike's or Butler Creek nipples ALL 16 will fit the Remington #10 which is close in size to the CCI #11 or the RWS #1075 (AKA #11). The RWS #10 is way too small to have ever fit any gun I've owned. About 1/3 of my guns will accept the CCI#11 and another 1/3 will accept the RWS #11. The only gun I have that will fire the CCI#10 is my Uberti 3rd Model Dragoon which has a hammer fall like a musket. It will smash anything. I've only replaced the nipples on about 1/3 of my guns, the rest are stock.

As for cap fall, I'm not sure what you mean.
62
The Darksider's Den / Re: Who is our Cas City resident Cap & Ball guru?
« Last post by RRio on January 28, 2023, 09:58:25 PM »
Stuff, like, are CCI caps worth a damn? Is there a falling cap fix ( saw Mike "Duke" Venturio's video on this).

Again.
63
The Winchester Model 1873 / Re: First Time 73 Owner
« Last post by BrickwallJackson on January 28, 2023, 09:52:43 PM »
Check out Choice Ammo. Good quality stuff.

I'm on their waiting list. They're out of stock like everybody else. Good to know that they are quality, though!
64
The Barracks / Re: paging Rattlesnake Jack Robson
« Last post by RattlesnakeJack on January 28, 2023, 09:51:21 PM »
Actually, I doubt if it will matter much who the maker of any of the firearms was …
 ;)
... pretty hard to tell, from even 5 feet away, who made a particular Sten gun or No. 4 Lee-Enfield rifle … 

Just thought it would be "extra cool", if one or the other happened to be Long Branch production, to put that one with the Canadian portion of the display. (Lots of Long Branch rifles and Stens went into British service too, however …) 

Soon should have a pretty good idea what I can contribute … looking like it might be more than I first thought. 
65
NCOWS / Re: Looking to join
« Last post by Wooly Dan on January 28, 2023, 09:40:06 PM »
Just had a shoot today.  Wish we had known earlier. Paul gets on often so I am sure he will be in touch soon. Our next shoot is April then our regional shoot in may. Looking forward to meeting you.
66
The Winchester Model 1873 / Re: First Time 73 Owner
« Last post by DeaconKC on January 28, 2023, 09:13:39 PM »
Check out Choice Ammo. Good quality stuff.
67
The Winchester Model 1873 / Re: First Time 73 Owner
« Last post by BrickwallJackson on January 28, 2023, 08:48:28 PM »
:)  Brickwall  ;)

Nice Job rebuilding our rifle.  80% of the resistance felt in the Finger Lever is from the Main Spring that powers the hammer.  20% is from the two springs that retain the lever in the closed position and hold the carrier block up.

If you wish to reduce the effort on the finger lever, first source another Main Spring and than reduce one of the main springs.  Reduce it very CAREFULLY. Reduce it too much and you get light primer strikes.  I suggest leaving the side springs alone.  Since you're not a CAS player, extensive spring grinding is not necessary nor recommended.


People ARE hazardous to Yer Health

Thanks man! Yeah, I tweaked it just a little bit and coupled with lubing it a little, made it much easier to work. I'm getting the hang of it. I like your idea on the mainspring, I'll keep that in mind if I ever feel like I need to lighten it up any more.

One thing I am finding is that ammo is in short supply. That is honestly a surprise. . .before the late unpleasantness you could find 44-40 all over the place. I'm shooting Buffalo Bore out of it, and it's a stout round that really gives you a sense of why this rifle was used by so many for so long. I'd hate to be downrange of this thing. Recoil is not even an issue compared to what I'm used to. This thing is a pleasure to shoot, and a work of art. They really knew how to make them back in the day.

I had some knucklehead say to me (derisively): "Huh. That's only a 100 yard deer rifle at best." 

I told him: "Buddy, I don't wanna walk that far."  ;D
68
The Winchester Model 1873 / Re: First Time 73 Owner
« Last post by BrickwallJackson on January 28, 2023, 08:34:21 PM »
A beautiful build, very impressive. My real ‘73 is a musket from 1891.  A leather lever wrap will make the lever easier to cycle by making the lever bigger [wider] and giving you more leverage. Makes it gentler on the knuckles too.

Thanks brother! A 73 musket is a rare bird, do you shoot it? I keep forgetting they tried selling them to the military. Thanks for the tip on the leather wrap, I'll give that a try. Though, since lubricating this thing it seems to be slicking up.
69
The Barracks / Re: paging Rattlesnake Jack Robson
« Last post by Major 2 on January 28, 2023, 06:47:55 PM »
I'll do a double check, to see proof and manufacture marks.
70
The Darksider's Den / Re: Who is our Cas City resident Cap & Ball guru?
« Last post by RRio on January 28, 2023, 04:03:28 PM »
:) Well . . .  ;)

Come to think of it, Montana Slim and Hellgate be righteous knowledgable too.   

What's the Question(s)??


People ARE hazardous to Yer Health you betcha
Stuff, like, are CCI caps worth a damn? Is there a falling cap fix ( saw Mike "Duke" Venturio's video on this).
Pages: 1 2 3 4 5 6 [7] 8 9 10
SMF spam blocked by CleanTalk

© 1995 - 2022 CAScity.com