Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => Marlin Lever Action Rifles => Topic started by: Bibbyman on March 26, 2019, 12:52:21 AM

Title: Proposed Marlin picture for new board
Post by: Bibbyman on March 26, 2019, 12:52:21 AM
(http://www.cascity.com/forumhall/index.php?action=dlattach;topic=62321.0;attach=64586;image)

How do I display pictures in the message?
Title: Re: Proposed Marlin picture for new board
Post by: Tuolumne Lawman on March 26, 2019, 09:50:49 AM
Yes!!!!!!
Title: Re: Proposed Marlin picture for new board
Post by: Isom on March 28, 2019, 03:13:54 PM
Now you're just showin' off. Sure is pretty though.  ;D
Isom
Title: Re: Proposed Marlin picture for new board
Post by: Tuolumne Lawman on March 29, 2019, 10:35:46 AM
My biggest regret on firearms I have let go, is when I sold my 1894 Century Limited years ago....
Title: Re: Proposed Marlin picture for new board
Post by: Bibbyman on March 29, 2019, 12:36:20 PM
We seen this one at one of our favorite toy stores and knew it waa special but really didn't know anything about it.   I went home and did some research.  We went back the next day the shop was open and bought it before someone else got it.  Then the big debate was over if we were going to shoot it or lock it away.  I lost.  It's in the safe.

But it did put is in the mood to add more Marlin 1894s in 44WCF.   

I came across a pre-safey 1894 carbine in 44 Magnum.   I got a 44WCF barrel of the same configuration from Numrich Arm.  A local cowboy gunsmith swapped out the barrel.  We put it together and it worked perfectly - even shot right on. 

Then a Marlin 1894 Cowboy Limited in 44WCF came up for sale.   Even better,  it had been reworked for Cowboy Action Shooting by Widdermaker Hill.   Mary glummed on to it and won't let go. 

Then we each got a pair of Taylor's Smoke Wagons in 44WCF.   Her's have 4-5/8" barrels,  mine 5-1/2".
Title: Re: Proposed Marlin picture for new board
Post by: LonesomePigeon on March 29, 2019, 01:28:59 PM
Bibbyman, are they always that easy to convert to .44-40? A local gun shop recently had a nice pre-safety .44 magnum. I have little desire to shoot .44 mag but if I had known you could just switch barrels I might have bought it.
Title: Re: Proposed Marlin picture for new board
Post by: Bibbyman on March 29, 2019, 01:52:52 PM
Bibbyman, are they always that easy to convert to .44-40? A local gun shop recently had a nice pre-safety .44 magnum. I have little desire to shoot .44 mag but if I had known you could just switch barrels I might have bought it.


Probably very lucky.  Just removed forend, magizene tube, sights, put in barrel vise with action cracked open, used big crescent wrench to screw 44 Magnum barrel off, put 44WCF barrel in vise, screwed action on it, reassembled parts, didn't even need to adjust sights! I have later came back and use Dremel tool to open up bolt face just a bit.

(https://forums.sassnet.com/uploads/monthly_2017_06/59306b9526aff_344WCFJune12017.jpg.0643a9326d0cd3642af66eb0c07971d9.jpg)
Title: Re: Proposed Marlin picture for new board
Post by: RRio on April 04, 2019, 10:53:55 PM
WOW !  That's a beauty!   :o
Title: Re: Proposed Marlin picture for new board
Post by: Baltimore Ed on May 22, 2020, 03:00:27 PM
Here’s a pix of my plain jane ‘94 in some WB action against Deke Thorton’s posse. Gave’em hell,too.
Title: Re: Proposed Marlin picture for new board
Post by: Coffinmaker on May 23, 2020, 07:55:28 PM

It is also a fairly simple matter to modify the carrier in a 44 Mag Marlin where it will run 44 Mag, 44 Spl or 44 Russian cartridges interchangeably.  Doesn't allow it to be a 44-40 though.  Widder knows how it's done.