Show Off Your Non-Cowboy Stuff Here

[Marshal Will Wingam]

That's a nice design, Maj. A half flap looks good for the 1911. Very cool.

[Major 2]

Thank you coach,  I had kinda doped out the pattern originally with this holster.

Which was 2 pieces of 5 ounce leather glued together to make a lined holster. The spray contact adhesive I used failed over the years and it began to separate at the edges....so  I just made the new one out of thicker leather.
Also altered the trigger S curve and the retaining strap...and use a 45 Colt case head as the rivet washer which I though was some unique 

[Rube Burrows]

I can't compete with you guys 

But I did this one for my 1911 Milsurp, and I like the way it turned out .

I like it. A good functional holster is always good.

[Marshal Will Wingam]

I like the newer version a lot more, Major. Also, that rivet washer is a cool idea. that gets a solid thumbs-up!

[Marshal Will Wingam]

Here you go, Rube (and anyone else who may be interested). I couldn't find the pattern so I took a few measurements from one I found lying around un-assembled and re-drew it. This is based on 3-4 oz leather for the pouch piece so if you use thicker leather, you'll have to adjust the pattern to work. The back piece is 8-9 oz leather. I think I used a couple empty mags to mold the pouches to fit but I may have made a couple wooden blanks to mold it. You may want to make one of these from paper to check the pattern before you make one from leather. Obviously, you sew the pouches on with the vertical stitch lines before folding the back down and catching the bottom of the pouches with the lower stitch line.

[Advertisers]

[Rube Burrows]

Here you go, Rube (and anyone else who may be interested). I couldn't find the pattern so I took a few measurements from one I found lying around un-assembled and re-drew it. This is based on 3-4 oz leather for the pouch piece so if you use thicker leather, you'll have to adjust the pattern to work. The back piece is 8-9 oz leather. I think I used a couple empty mags to mold the pouches to fit but I may have made a couple wooden blanks to mold it. You may want to make one of these from paper to check the pattern before you make one from leather. Obviously, you sew the pouches on with the vertical stitch lines before folding the back down and catching the bottom of the pouches with the lower stitch line.

Thank you Marshal. Magazines and any type of pouch has been harder for me than holsters. 

[Marshal Will Wingam]

Thank you Marshal. Magazines and any type of pouch has been harder for me than holsters.

Glad to help. I look forward to seeing what you make next.

[Capt Quirk]

I was asked to make a rifle sling, using some copperhead skin they had tanned. She said it was glycerin tanned. I started by skived down the edges of some 2-3 oz, and tried gluing the skin to it with weldwood. It didn't hold as well as I would have liked. Then I applied a coat of resolene to protect it. Wasn't sure what would work best, but it was a toss up between resolene and saddlelac.

I then sandwiched the skin between two layers of 5 oz. The front was done in dark brown, that looked more reddish, like a medium brown. The back side I oil tanned, cut out the center, adding foam padding and suede.

[Marshal Will Wingam]

Looks good. Nice inlay, there. Your friend should be quite pleased with that one. It's a beautiful sling.

I'll move this over to the "non-cowboy thread" for you.

[Capt Quirk]

Thank you Will. It came out much better the second time. Any tips for snakeskin? I still have the rest of the snake to play with.

[Advertisers]

[Marshal Will Wingam]

I've never worked with snakeskin. There are a few leather workers here who have, though. Maybe one will be able to give you some direction on that.

[Capt Quirk]

I have only used snake once before, that was way back in '88. Someone gave me a rattler, which I skinned, ate, and tanned the hide. I then sewed some of the panels onto the front shoulders of a leather vest. The reason that year sticks in my mind (when so much other stuff has gone), is because that is the first year I wore that vest to Bike Week in Daytona. In '89, there was snakeskin everywhere.

[Marshal Will Wingam]

I have only used snake once before, that was way back in '88. Someone gave me a rattler, which I skinned, ate, and tanned the hide. I then sewed some of the panels onto the front shoulders of a leather vest. The reason that year sticks in my mind (when so much other stuff has gone), is because that is the first year I wore that vest to Bike Week in Daytona. In '89, there was snakeskin everywhere.

That's a fun fact. Were you just ahead of the crowd or did you actually start a trend?

[Rube Burrows]

Nicely done sling.

[GunClick Rick]

Howdy KT,

Great to hear from you. That is a beautiful Holster. It would be my "Sunday - go to meeting" Holster. If my eyes don't deceive me, it looks the insert on the strap matches the grip on the Pistol. That's a cool, nifty idea.

Many thanks for sharing this with us.

Had to see if he was still at it,i figured he was.Merry Christmas KT and all here...Ya fuachity ole scudders!!