News & Blogs
Home
Posts
Recent Posts
Help
Business Directory
Calendar
Advertising Rates
Contact Us
Login
Register11
The Barracks / Re: Reloading for a 03 Springfield
« Last post by Sedalia Dave on April 12, 2024, 09:44:29 PM »For those shooting 13 grains of Red Dot. What bullet weight are you using and range setting are you using on the rear sight?
Recent Posts
12
Upcoming Musters / Re: Dept. of the Missouri Muster
« Last post by Drydock on April 12, 2024, 05:46:35 PM »will be there. 
13
Uberti, Pietta and other SAA Clones / Re: Replacing Cylinder Base Pins for Uberti, Pietta, ASM 1873 replicas
« Last post by CatBacker88 on April 12, 2024, 05:06:26 PM »Have you tried these guys yet ?Yes, out of stock. I expect I'll order from them eventually, though, if the DIY scheme goes poorly.
https://www.vtigunparts.com/store/shopdisplayproducts.asp?id=23&cat=Uberti+1873+Cattleman+SAA+and+Target
14
Upcoming Musters / Re: Dept. of the Missouri Muster
« Last post by Silver Creek Slim on April 12, 2024, 04:28:39 PM »We'll be there .
Slim
Slim
15
Uberti, Pietta and other SAA Clones / Uberti (Cimarron) Bisley
« Last post by Crossdrawnj on April 12, 2024, 02:43:32 PM »Does the Uberti Bisley model have a one piece back strap/trigger guard?
16
Uberti, Pietta and other SAA Clones / Re: Replacing Cylinder Base Pins for Uberti, Pietta, ASM 1873 replicas
« Last post by Tronicst1 on April 12, 2024, 11:47:41 AM »Have you tried these guys yet ?
https://www.vtigunparts.com/store/shopdisplayproducts.asp?id=23&cat=Uberti+1873+Cattleman+SAA+and+Target
https://www.vtigunparts.com/store/shopdisplayproducts.asp?id=23&cat=Uberti+1873+Cattleman+SAA+and+Target
17
Frontier Iron / Re: Something Wonderful My Way Cometh....
« Last post by Black River Smith on April 12, 2024, 10:24:32 AM »Rather than the typical 200 grain flat point CAS .44 Russian loads, I used Bear Creek's 246 grain, conical round nose .44 Russian/Special bullet over 5.3 grains of Unique. That is listed in Lymann as a factory duplication load. That should smack the plates with authority.
When I shot in NCOWS I used the Lyman 429251 bullet with BP for my 44 Russians in the '72 OP. Did that only because I never could put my hands on the Lyman 429184 bullet mold listed as the 'regular' 44 Russian bullet.
Have fun with those revolvers. I will own one someday, just not this soon.
18
Uberti, Pietta and other SAA Clones / Re: Replacing Cylinder Base Pins for Uberti, Pietta, ASM 1873 replicas
« Last post by CatBacker88 on April 12, 2024, 07:49:41 AM »The GWII (Pietta) base pins are double groove as well (hard to tell from the parts drawing). And I hate Pietta pins anyway, because the groove(s) are only on one side of the pin, not all the way around, so they have to be perfectly aligned when you insert it or it can get jammed.Understood, one of my revolvers is a Pietta, and that pin will be the one I practice on, but it'll have to go whether I'm successful or not.
19
The Barracks / Re: Reloading for a 03 Springfield
« Last post by Baltimore Ed on April 11, 2024, 09:14:01 PM »Been using 10 gr of VV N32C [out of production] with a 193 gr boolit for my 03s. Build them for my clubs BAMM but sadly we shoot short range. Still have a can and a half.
20
Frontier Iron / Re: Something Wonderful My Way Cometh....
« Last post by Tuolumne Lawman on April 11, 2024, 08:28:32 PM »Rather than the typical 200 grain flat point CAS .44 Russian loads, I used Bear Creek's 246 grain, conical round nose .44 Russian/Special bullet over 5.3 grains of Unique. That is listed in Lymann as a factory duplication load. That should smack the plates with authority.
SMF spam blocked by CleanTalk