Author Topic: Proper lead hardness for older original1892’s  (Read 497 times)

Offline treebeard

  • Top Active Citizen
  • *
  • Posts: 480
  • Liked:
  • Likes Given: 9
Proper lead hardness for older original1892’s
« on: July 26, 2020, 12:46:01 PM »
I have several original Winchester 1892’s and would like advice on the proper lead harness to use in shooting them without undue wear. Most of the commercial Bullet sellers advertise “hard Cast” bullets which seem to be about Brinell 18. My oldest 1892 dates from 1893 but most others are later early 1900’s to early 1920’’s.  What should be appropriate for these? Thanks for any help.

Offline Dave T

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 773
  • Liked:
  • Likes Given: 367
Re: Proper lead hardness for older original1892’s
« Reply #1 on: July 26, 2020, 01:53:04 PM »
I wouldn't shoot anything harder than 1-16 alloy. Back when I owned both a 44 WCF 1873 and 1892 (both originals) I shot 1-20 bullets and had no problems at all.

YMMV,
Dave

Offline treebeard

  • Top Active Citizen
  • *
  • Posts: 480
  • Liked:
  • Likes Given: 9
Re: Proper lead hardness for older original1892’s
« Reply #2 on: July 26, 2020, 02:17:15 PM »
I wouldn't shoot anything harder than 1-16 alloy. Back when I owned both a 44 WCF 1873 and 1892 (both originals) I shot 1-20 bullets and had no problems at all.

YMMV,
Dave
[/quot

Thanks Dave--I looked up Lyman #2 and the nominal Brinell was 15. I wold like to find a bullet seller that casts that or even a little better. If anyone knows of a caster that uses lead in that range i would appreciate a recommendation.

Offline treebeard

  • Top Active Citizen
  • *
  • Posts: 480
  • Liked:
  • Likes Given: 9
Re: Proper lead hardness for older original1892’s
« Reply #3 on: July 26, 2020, 02:22:36 PM »
Just found that Missouri Bullet Company cowboy bullets are cast at a Brinell 12--That should be easy on that old "92.

Offline Tater Pickens

  • Top Active Citizen
  • *
  • Posts: 132
  • Liked:
  • Likes Given: 0
Re: Proper lead hardness for older original1892’s
« Reply #4 on: July 26, 2020, 08:37:34 PM »
Does anyone know the hardness of the bullets made by Springfield Slim? I use his bullets in my 1st generation 45 colt SAA and my original 92 Winchester carbine.

Advertisers

  • Guest
Re: Proper lead hardness for older original1892’s
« Reply #5 on: Today at 04:30:22 AM »

Offline greyhawk

  • Top Active Citizen
  • *
  • Posts: 953
  • Liked:
  • Likes Given: 32
Re: Proper lead hardness for older original1892’s
« Reply #5 on: July 26, 2020, 10:27:19 PM »
Just found that Missouri Bullet Company cowboy bullets are cast at a Brinell 12--That should be easy on that old "92.

If you hunt with the 92 - softer is better - Lyman no  2 certainly tooo hard for my liking

 

SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com