Author Topic: 1884 trapdoor chamber issue  (Read 66 times)

Offline nativeshootist

  • Top Active Citizen
  • *
  • Posts: 374
  • Liked:
  • Likes Given: 1
1884 trapdoor chamber issue
« on: Yesterday at 08:35:05 PM »
So a few month ago I bought a 1884 trapdoor, it was a infantry rifle that had the stock cut down but the barrel wasn't. So the issues is that after firing a round, the case is swelled into the chamber and sticks into it where the ejector can't remove it requiring it to be pried out. then once the case is removed it shows imprinting where the case is grabbing on too and it does go around the entire casing, I thought it was a piece of brass that was left in there. I have some cases that came with the rifle that doesn't show the marks the other cases have. i will try and get photos of the chamber later.
http://imgur.com/a/WMGs80J
http://imgur.com/a/hToHbDE

 

SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com