Author Topic: Removing Carrier and Lever Screws  (Read 338 times)

Offline Coal Creek Griff

  • Top Active Citizen
  • *
  • Posts: 1932
  • Liked:
  • Likes Given: 197
Removing Carrier and Lever Screws
« on: July 08, 2021, 07:52:22 PM »
Tip for removing carrier and lever screws.

Manager, WT Ranch--Coal Creek Division

BOLD #921
BOSS #196
1860 Henry Rifle Shooter #173
SSS #573

Offline Pettifogger

  • Top Active Citizen
  • *
  • Posts: 3559
  • Liked:
  • Likes Given: 8
Re: Removing Carrier and Lever Screws
« Reply #1 on: July 08, 2021, 07:59:52 PM »
I have removed LOTS of those screws and none of them came out that easy.

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 3706
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 393
Re: Removing Carrier and Lever Screws
« Reply #2 on: July 08, 2021, 09:28:08 PM »
Yeah, he edited out the part where he used the hammer and torque wrench to loosen the screw the first time.

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 6647
  • Liked:
  • Likes Given: 75
Re: Removing Carrier and Lever Screws
« Reply #3 on: July 09, 2021, 08:31:05 AM »

 :)  Cowabunga Howdy Doody  ;)

It's really that easy??  Horsepucky!!

PLUS ONE for PETTIFOGGER

PLUS ONE for ABILENE

Plus One for HORSEPUCKY!!  Plus, without some form of PADDED SUPPORT, He was working on the rifle ONE HANDED.  It also appears the rear spring boss has been fit to the frame in advance of his demonstration.  Snake Oil says I.

Offline Cliff Fendley

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 3517
  • Liked:
  • Likes Given: 205
Re: Removing Carrier and Lever Screws
« Reply #4 on: July 10, 2021, 07:25:51 AM »
I too am calling BS on that way working if that was a new rifle.

However I have taken a piece of leather to protect the finish and squeezed the springs with vice grips to take the bind off of the screw and they come out pretty easy that way.

Generally impact driver and hammer is the quick easy way without damaging anything.
http://www.fendleyknives.com/

NCOWS 3345  RATS 576 NRA Life member

Johnson County Rangers

Advertisers

  • Guest
Re: Removing Carrier and Lever Screws
« Reply #5 on: Today at 04:08:31 PM »

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 13876
  • Cracker Cow Cavalry
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 156
Re: Removing Carrier and Lever Screws
« Reply #5 on: July 10, 2021, 07:52:48 AM »
Fake news !   did not work that easy on any of mine  ::)
when planets align...do the deal !

Offline Baltimore Ed

  • Top Active Citizen
  • *
  • Posts: 1501
  • SASS #: 11754
  • Liked:
  • Likes Given: 43
Re: Removing Carrier and Lever Screws
« Reply #6 on: July 10, 2021, 05:08:30 PM »
Why I have an impact driver in my shop now, never needed one before.
"Give'em hell, Pike"
 There is no horse so dead that you cannot continue to beat it.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 13876
  • Cracker Cow Cavalry
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 156
Re: Removing Carrier and Lever Screws
« Reply #7 on: July 10, 2021, 06:28:43 PM »
Me too movement  ::)   that's why I got one
when planets align...do the deal !

Offline Slamfire

  • Top Active Citizen
  • *
  • Posts: 863
  • Liked:
  • Likes Given: 15
Re: Removing Carrier and Lever Screws
« Reply #8 on: July 11, 2021, 03:11:13 PM »
 Well now !! There's something I haven't seen in a while ,,, the top of my work table  ::),, cool … But I thank him for his time.


  coffee's ready ,, Hootmix.

 

SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com