Recent Posts

Pages: 1 2 3 4 5 6 [7] 8 9 10
61
NCOWS / Saddle Bags
« Last post by Johnny McCrae on October 16, 2021, 12:59:30 PM »
Please view my ad in the Classified section for a set of Saddle Bags ideal for use in NCOWS Matches.

                                            *** SOLD ***
62
Gunsmithing / Re: New cylinder,,teeth to long?
« Last post by willy on October 16, 2021, 12:27:52 PM »
Yes it does have the removable bushing,,The teeth on the new cylinder are .01 longer than the old cylinder,,all other measurements are the same,,Also the teeth on new cylinder come to a sharp point where as the original cylinder has more of a blunt shape on the teeth.
63
RATS / Re: Necessity is the mother.
« Last post by Baltimore Ed on October 16, 2021, 11:58:08 AM »
The .45acp cylinder to be here Monday. It’s in Raleigh. As the cylinders easily swap on my 3.5 in Birdshead and 7.5 in Vaqueros I’ll try to fit this one to them. Shot some .45 acp srp loads in the AO 1911, gun ran fine and rang and clanged my steel.
64
Tall Tales / Re: October Cawfee,Tea, Soup and chili
« Last post by Major 2 on October 16, 2021, 10:57:36 AM »
Keys to the Kingdom today, my first day all by myself ...I have two volunteers in house.
But this my Solo tour today
65
Gunsmithing / Re: New cylinder,,teeth to long?
« Last post by Coffinmaker on October 16, 2021, 10:41:35 AM »

 :)  willy   ;)

Does this cylinder have a removable bushing ??

Yes, you can work the star down, but advised, you may well screw up the headspace in the process.

Play Safe out There
66
Colt Firearms / Re: A sad fate for an Artillery model
« Last post by Roscoe Coles on October 16, 2021, 10:37:34 AM »
 It may not be a good candidate for a full restoration.  We will see when it gets here. The first step would be to remove the plating, which can be a challenge, especially with gold.  In any case, Dave is 2 years behind on restorations so the “after” shots are a ways off if it goes to restoration. 
67
BROW / Re: Picked up a new Betsy
« Last post by Roscoe Coles on October 16, 2021, 10:31:38 AM »
I have a 45-55 (405) carbine load that I load for my 1886 carbine that is pleasant to shoot.  I think I will stick with that.  I have a sharps 45-90 if I want more zip. 
68
CAS City Classifieds / Pedersoli Mortimer flint shotgun
« Last post by varsity07840 on October 16, 2021, 10:08:30 AM »
Actual bore 13 ga. Professionally jug choked full. Excellent condition. Great turkey gun.
Comes with:

13 ga cushion, over powder and over shot wads.
.690 round balls
Adjustable shot flask
10-32 jag

$1,100.00 shipped lower 48
Photos emailed on request
69
BROW / Re: Pedersoli Mortimer flint shotgun
« Last post by varsity07840 on October 16, 2021, 10:04:54 AM »
SORRY THAT THIS WAS POSTED IN THE WRONG SECTION.
70
Gunsmithing / New cylinder,,teeth to long?
« Last post by willy on October 16, 2021, 10:04:34 AM »
Converting a Uberti to 44 special,,Bought new cylinder and it will not fit in frame ,, tried fitting it in a Uberti cattleman revolver and a new El patron revolver,, It was a no go on both,,After measuring everything ,,the only thing different is the ratchet teeth are longer on the new cylinder,,So before I start taking a file to it,,Is this a feasible solution?
Pages: 1 2 3 4 5 6 [7] 8 9 10
SMF spam blocked by CleanTalk

© 1995 - 2021 CAScity.com