Author Topic: USFA Bisley models, Value?  (Read 436 times)

Offline Marshal5

  • Citizen
  • *
  • Posts: 5
  • SASS #: 10064
  • Liked:
  • Likes Given: 0
USFA Bisley models, Value?
« on: June 11, 2022, 06:25:21 PM »
In about 2008 I had the opportunity to work for a week in the Hartford area. I called USFA and arranged to take a tour of the factory. I was met at the door by a gentleman named Gary who I believe was the manager. He took me around the operation showing each step of the process. At that time every part for the SAA except for one screw was made in house and they were planning to set up to make that screw also. I recall also seeing some of the lighting rifles in the factory.
At the end of the tour, Gary pointed out an elderly man at the handgun assembly area and told me he was a former employee of the Colt custom shop and had worked to teach many of the USFA employees.
At the end of the tour I told Gary that I would order a pair of Bisley USFA is he would see to it that they were fitted by the former Colt employee. I purchased a pair of Bisley Premium grade guns. Consecutive serial numbers (2600 range), they have a 4.5 inch barrel in 38 SPL. The guns have black plastic grips, bright blue and outstanding case color. The guns were shipped to Jim Finch at Long Hunter guns to polish up for SASS shooting. I shot them in two matches and they have been in the safe since. I find myself at a point where I need to consider selling some guns and might part with these. There is slight wear at the muzzle but other wise are in beauty Queen condition. I know that I had saved the boxes but for the life of me just can't find them.
I have never seen any other Bisley models from USFA but sure there are a FEW around. Any idea of the value of the guns?

Offline River City John

  • NCOWS Senator
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 4241
  • Mr. & Mrs. John Covert
  • NCOWS #: L-146
  • GAF #: 275
  • Liked:
  • Likes Given: 240
Re: USFA Bisley models, Value?
« Reply #1 on: June 11, 2022, 08:13:00 PM »
Spurious GAF and NCOWS numbers. Odd . . .
"I was born by the river in a little tent, and just like the river I've been running ever since." - Sam Cooke
"He who will not look backward with reverence, will not look forward with hope." - Edmund Burke
". . .freedom is not everything or the only thing, perhaps we will put that discovery behind us and comprehend, before it's too late, that without freedom all else is nothing."- G. Warren Nutter
NCOWS #L146
GAF #275

Offline Marshal5

  • Citizen
  • *
  • Posts: 5
  • SASS #: 10064
  • Liked:
  • Likes Given: 0
Re: USFA Bisley models, Value?
« Reply #2 on: June 11, 2022, 08:42:28 PM »
River City John.
I just joined this web site but you can see from my SASS number that I have been shooting CAS for a few years now.
When I registered on this site the NCOWS and GAF numbers were filled in with the 150,000 number you see displayed.
I am not a member of NCOWS. What the heck is GAF?
Just a life member of SASS.
If this is a problem for the members here I can just leave the site.
Just was looking for hard to find information about USFA guns.

Offline River City John

  • NCOWS Senator
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 4241
  • Mr. & Mrs. John Covert
  • NCOWS #: L-146
  • GAF #: 275
  • Liked:
  • Likes Given: 240
Re: USFA Bisley models, Value?
« Reply #3 on: June 11, 2022, 10:14:37 PM »
I did not realize GAF and NCOWS numbers were automatically filled in by default. Doubly odd . . .

At least you were able to edit them out of the profile.

GAF = Grand Army of the Frontier     See forum The Barracks

"I was born by the river in a little tent, and just like the river I've been running ever since." - Sam Cooke
"He who will not look backward with reverence, will not look forward with hope." - Edmund Burke
". . .freedom is not everything or the only thing, perhaps we will put that discovery behind us and comprehend, before it's too late, that without freedom all else is nothing."- G. Warren Nutter
NCOWS #L146
GAF #275

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4128
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 688
Re: USFA Bisley models, Value?
« Reply #4 on: June 11, 2022, 10:48:57 PM »
Howdy M5, I don't know the answer to your questions but you are in the right place.  There are some very knowledgeable people here about the USFA's, and the Gary you mentioned is on here as well.  He may very well chime and I'll bet he remembers you!   :)

If you haven't yet, look through all the previous posts on this forum, might be some about Bisleys.

Advertisers

  • Guest
Re: USFA Bisley models, Value?
« Reply #5 on: Today at 08:10:37 PM »

Offline Marshal5

  • Citizen
  • *
  • Posts: 5
  • SASS #: 10064
  • Liked:
  • Likes Given: 0
Re: USFA Bisley models, Value?
« Reply #5 on: July 15, 2022, 09:02:00 AM »
Just thought that I would add a photo of the guns.
Have a good day!

Offline CraigC

  • Top Active Citizen
  • *
  • Posts: 563
  • aka Graveyard Jack
    • Graveyard Jack's Custom Sixgun Leather
  • SASS #: 81,827
  • Liked:
  • Likes Given: 51
Re: USFA Bisley models, Value?
« Reply #6 on: July 15, 2022, 10:46:48 AM »
From what I understand, all the Bisleys are Uberti parts guns. There were a few made and even some flat-top Bisley models. Not sure as to value, I see USFA's all over the place. Best advice is to start with a reasonable reserve and let the bidders decide. You're definitely going to get more than you paid for them.
Graveyard Jack SASS #81,827

Offline Marshal5

  • Citizen
  • *
  • Posts: 5
  • SASS #: 10064
  • Liked:
  • Likes Given: 0
Re: USFA Bisley models, Value?
« Reply #7 on: July 15, 2022, 02:31:08 PM »
At the time I bought these directly from the factory they were making all of the guns with parts from the USA. As I recall Gary told me that was also true of the Bisley handguns I have.
Ther serial number range also matches guns made in the USA.

Offline Buckaroo Lou

  • Top Active Citizen
  • *
  • Posts: 403
  • Liked:
  • Likes Given: 67
Re: USFA Bisley models, Value?
« Reply #8 on: July 15, 2022, 04:57:33 PM »
CraigC,

I don't think all Bisley guns are Uberti parts guns. Like Marshal5 has stated I think there were some that were all USA parts revolvers. I think I have seen a few on CB for sale in the past. I suppose I could be wrong, but Gary Granger would be the one to know for certain.

Here is a discussion about USFA Bisley guns from some time back that will fill you in on whether there are all USA parts Bisley revolvers.

  https://www.cascity.com/forumhall/index.php?topic=56292.0
 
A man's true measure is found not in what he says but in what he does.

Offline Pangaea

  • Top Active Citizen
  • *
  • Posts: 107
  • Liked:
  • Likes Given: 0

Advertisers

  • Guest
Re: USFA Bisley models, Value?
« Reply #10 on: Today at 08:10:37 PM »

 

SMF spam blocked by CleanTalk

© 1995 - 2022 CAScity.com