Cas City Forum Hall & CAS-L
Special Interests - Groups & Societies => Marlin Lever Action Rifles => Topic started by: Buffalo Creek Law Dog on May 29, 2020, 12:00:00 PM
-
I have a 94 Marlin in 45 Cal. It ejects all live ammo except the last live cartridge. It ejects all spent casings except the last one. When I do it in slow motion to see what is going on, I notice that the extractor pulls the bullet/empty casing back about one inch then drops it down onto the loading tray. Any suggestions/comments will be appreciated.
Thanks in advance.
-
Extractor not holding on to the case tight? Has the tit below the extractor on bolt face been removed?
-
Flush out the extractor hole in the bolt.
Remove the extractor and check to be sure the spring hasn't broken.
Install a Ranger Point Precision extractor.
Gary
-
If you’ve never cleaned out the innerds of your Marlin bolt you’ll be surprised. Crud buildup would be my first guess also. The next round on the lifter helps push the mty out of your gun.
-
Thanks for the info folks, I did the cleaning part, so I will try the Ranger point Extractor.
Thanks for your time.
-
Ck out the Marlin Fourm for extractor adjustments
Gary