Author Topic: What are my 38/40 38WCF Rifle options?  (Read 4655 times)

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 1179
  • Liked:
  • Likes Given: 36
What are my 38/40 38WCF Rifle options?
« on: March 22, 2021, 04:16:40 PM »
I need/want a 38/40 rifle with a 24" octagon barrel.  I do not need brand new.  Don't want to give $1200 to $1600 for a Uberti new, I might as well then look for an original.  So..........

Besides an original Winchester '73 & '92, what are my replica options and from whom?  Also, opinions on best places to look.

I really would like this rifle to be an 1892 model but I do not know if any replica's (Rossi) ever offered a 38WCF chambering.

Being the oddist of the calibers what are my chances of finding one.  I know my local area does not have a selection.

Thanks
Black River Smith

Offline Martini450

  • Active citizen
  • *
  • Posts: 27
  • Liked:
  • Likes Given: 0
Re: What are my 38/40 38WCF Rifle options?
« Reply #1 on: March 22, 2021, 09:01:12 PM »
Not sure if they still offer it, but Chiappa made that exact configuration (Octagon 24" Model 1892) in 38 WCF a few years ago.  I handled one in Taylor's showroom eight or nine years ago, and almost bought it.  Ended up going with the same rifle in 44 WCF instead, as I already had dies and moulds in that calibre.  Very nice rifles, both of them.  I'm still happy with the one I brought home.

Offline Trailrider

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2366
    • Gunfighter Zone
  • Liked:
  • Likes Given: 0
Re: What are my 38/40 38WCF Rifle options?
« Reply #2 on: March 23, 2021, 11:53:06 AM »
I think Marlin (the original) chambered one of their leveraction rifles in .38-40 (they called it that so as not to advertise Winchester's term, .38 WCF).  Can't recall the model Marlin.
Ride to the sound of the guns, but watch out for bushwhackers! Godspeed to all in harm's way in the defense of Freedom! God Bless America!

Your obedient servant,
Trailrider,
Bvt. Lt. Col. Commanding,
Southern District
Dept. of the Platte, GAF

Advertising

  • Guest
Re: What are my 38/40 38WCF Rifle options?
« Reply #3 on: Today at 09:55:26 AM »

Offline Dave T

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1058
  • Liked:
  • Likes Given: 901
Re: What are my 38/40 38WCF Rifle options?
« Reply #3 on: March 23, 2021, 01:18:42 PM »
I think Marlin (the original) chambered one of their leveraction rifles in .38-40 (they called it that so as not to advertise Winchester's term, .38 WCF).  Can't recall the model Marlin.

I believe it was the original 1894 Marlin, which chambered all the WCF pistol length cartridges but re-named them the 44-40, the 38-40, and the 32-20.

Dave

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 1179
  • Liked:
  • Likes Given: 36
Re: What are my 38/40 38WCF Rifle options?
« Reply #4 on: March 23, 2021, 01:47:48 PM »
Not sure if they still offer it, but Chiappa made that exact configuration (Octagon 24" Model 1892) in 38 WCF a few years ago.  I handled one in Taylor's showroom eight or nine years ago, and almost bought it.  Ended up going with the same rifle in 44 WCF instead, as I already had dies and moulds in that calibre.  Very nice rifles, both of them.  I'm still happy with the one I brought home.

Thanks for the lead.  I checked Taylor's website, it appears they do not offer the 38/40 as an option.  I would hate to spend $1500 then another $500 to line it to 38/40.  I would do this to a Rossi at $700 or used pricing.


I have checked all the gun selling sites and while they have some listings, they are priced out of my league.
Black River Smith

Offline bear tooth billy

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1035
  • NCOWS Senator
  • Liked:
  • Likes Given: 51
Re: What are my 38/40 38WCF Rifle options?
« Reply #5 on: March 23, 2021, 03:01:04 PM »
Check Rock Island Auction, they sell a lot of original Winchesters

                     BTB
Born 110 years too late

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4672
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1180
Re: What are my 38/40 38WCF Rifle options?
« Reply #6 on: March 23, 2021, 03:09:53 PM »
I believe it was the original 1894 Marlin, which chambered all the WCF pistol length cartridges but re-named them the 44-40, the 38-40, and the 32-20.

Dave

I was thinking the same thing about original Marlins.  I checked Wikipedia, and we know that site is not always 100% accurate but they did not list the 38-40 as an original option (32-20 and 44-40 were listed), so I don't know about that.  I know a guy with a modern 38-40 Marlin, but I'm thinking he might have had it rebarreled, I don't recall.  Either that, or it was a quite rare offering.

Offline LongWalker

  • Top Active Citizen
  • *
  • Posts: 370
  • GAF #: 911
  • Liked:
  • Likes Given: 12
Re: What are my 38/40 38WCF Rifle options?
« Reply #7 on: March 23, 2021, 06:00:20 PM »
I owned an original marlin 1894 in 38WCF, and have seen several others.  Not as common as the 32-20, but they are out there. 
In my book a pioneer is a man who turned all the grass upside down, strung bob-wire over the dust that was left, poisoned the water, cut down the trees, killed the Indian who owned the land and called it progress.  Charles M. Russell

Offline ira scott

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 491
  • AKA: Broken Nose Scotty
  • Liked:
  • Likes Given: 59
Re: What are my 38/40 38WCF Rifle options?
« Reply #8 on: March 23, 2021, 10:32:50 PM »
The first Marlin chambered in .38-40 was the Model 1888,  top eject, Approx. 4800 mfg. 1888-1889.  The Model 1889 was the first solid top frame side-eject chambered in .25-20,  .32-20,  .38-40 and .44-40.  Blue Book of Gun Values says 55,000 were mfg. 1889-1899. Described as having a "short throw lever action",  FACTORY SHORT STROKE 1889 style!

B.N.Scotty
It is far better to remain silent, and be thought a fool, than to speak and remove all doubt!

Offline Navy Six

  • Top Active Citizen
  • *
  • Posts: 459
  • SASS #: 26385
  • NCOWS #: 1410
  • Liked:
  • Likes Given: 66
Re: What are my 38/40 38WCF Rifle options?
« Reply #9 on: March 26, 2021, 07:24:10 PM »
I handled a 1889 Marlin in 38-40 about 10 years ago. It was for sale, but I passed it up because the interior of the barrel was in extremely poor shape. A shame as I am always looking for 38-40's.
Over the last 20 years I've managed to find a new 66 & 73 Uberti in 38-40 and actually had another Uberti 66, that started out as a 45 Colt, rebarreled to 38-40.
Only Blackpowder Is Interesting 
"I'm the richest man in the world. I have a good wife, a good dog and a good sixgun." Charles A "Skeeter" Skelton

Offline ira scott

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 491
  • AKA: Broken Nose Scotty
  • Liked:
  • Likes Given: 59
Re: What are my 38/40 38WCF Rifle options?
« Reply #10 on: March 26, 2021, 09:27:14 PM »
I have not personally had it done, or even know the cost, but it is possible to have barrels relined.

B.N.Scotty
It is far better to remain silent, and be thought a fool, than to speak and remove all doubt!

Offline Galloway

  • Top Active Citizen
  • *
  • Posts: 518
  • Liked:
  • Likes Given: 0
Re: What are my 38/40 38WCF Rifle options?
« Reply #11 on: March 27, 2021, 12:47:05 PM »
I was ready to buy a uberti but reloading components are zilch right now for 38wcf

Offline ira scott

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 491
  • AKA: Broken Nose Scotty
  • Liked:
  • Likes Given: 59
Re: What are my 38/40 38WCF Rifle options?
« Reply #12 on: March 27, 2021, 01:11:41 PM »
I was ready to buy a uberti but reloading components are zilch right now for 38wcf

And everything else,  the only thing I have found recently is a very few Shotgun primers and a few projectiles I could use.

B.N.Scotty
It is far better to remain silent, and be thought a fool, than to speak and remove all doubt!

Offline Buckaroo Lou

  • Top Active Citizen
  • *
  • Posts: 523
  • Liked:
  • Likes Given: 93
Re: What are my 38/40 38WCF Rifle options?
« Reply #13 on: March 27, 2021, 07:43:59 PM »
I know this doesn't help the OP, but I once had an exceptional original first year Winchester 1892 rifle in .38-40 back in the day when I was not very knowledgeable about older Winchesters. It had an excellent bore and very good wood. I sold it for $1000 to a guy who wanted it bad. I have long regretted it.  :'(
A man's true measure is found not in what he says but in what he does.

Offline Jubal Starbuck

  • Top Active Citizen
  • *
  • Posts: 231
  • Liked:
  • Likes Given: 1
Re: What are my 38/40 38WCF Rifle options?
« Reply #14 on: March 28, 2021, 06:05:30 PM »
     I bought an 1889 Marlin rifle with a broken hammer spur and a poor bore some years back at a local gun show.  A friend allowed me to look through a drawer of old Marlin parts he had and there was a hammer exactly like mine only complete!  I installed my new hammer and took it out to shoot.  My groups were not to my satisfaction, so I ordered a Rapine hollow based mold for .38 WCF.  I was still not satisfied so I got it relined and have been happy with it ever since.  I only shoot black powder loads in it, as I was told the 1889's were not as strong action wise as the later 1994 models, which is okay as I prefer to shoot black powder loads anyhow.  I have had a '73 Winchester in .44WCF and a Winchester 1886 in .40-65 both relined and am very pleased with both of them too.

Regards,

Jubal Starbuck

Offline The Pathfinder

  • Top Active Citizen
  • *
  • Posts: 642
  • Liked:
  • Likes Given: 7
Re: What are my 38/40 38WCF Rifle options?
« Reply #15 on: March 28, 2021, 06:28:25 PM »
Every now and then an old refinished '92 will show up on GunBroker, that's how I got mine and for well under the $1000 mark. Collectors, I guess, don't really pay too much attention to the refinished guns. Course that was before covid, and before most found out what a joy the old 38-40 was to shoot. Good luck.

Offline Colt Fanning

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 333
  • Liked:
  • Likes Given: 0
Re: What are my 38/40 38WCF Rifle options?
« Reply #16 on: March 29, 2021, 08:16:44 AM »
I have a colt lightning in 38-40
Regards
Colt

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4672
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1180
Re: What are my 38/40 38WCF Rifle options?
« Reply #17 on: March 29, 2021, 11:13:27 AM »
I have a colt lightning in 38-40
Regards
Colt

Oh yeah, there's that!  The OP did not say "lever action"  :)

Offline Navy Six

  • Top Active Citizen
  • *
  • Posts: 459
  • SASS #: 26385
  • NCOWS #: 1410
  • Liked:
  • Likes Given: 66
Re: What are my 38/40 38WCF Rifle options?
« Reply #18 on: March 31, 2021, 02:37:07 PM »
I was ready to buy a uberti but reloading components are zilch right now for 38wcf
A similar situation is what got me started into bullet casting. I was looking for 38/40 components beginning about 35 years ago. I would go into a gun store and ask for 38/40 lead bullets and the clerk would come out with 38 Special stuff.  It was a blessing in disguise as I can now make whatever I need.
Only Blackpowder Is Interesting 
"I'm the richest man in the world. I have a good wife, a good dog and a good sixgun." Charles A "Skeeter" Skelton

Offline 44caliberkid

  • Citizen
  • *
  • Posts: 23
  • Liked:
  • Likes Given: 0
Re: What are my 38/40 38WCF Rifle options?
« Reply #19 on: July 18, 2022, 09:11:47 PM »
I have a Marlin Model 1889 rifle in 38 WCF, in very good condition. I load black powder rounds with Dick Dastardly’s Big Lube bullet. She’s a great shooter and cost $900.

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com