Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
The Darksider's Den / Re: Anybody make reloadable .46 rimfire cases?
« Last post by ndnchf on Today at 05:17:52 PM »
Full view.
2
The Darksider's Den / Re: Anybody make reloadable .46 rimfire cases?
« Last post by ndnchf on Today at 05:15:21 PM »
I'd love to see a pic of the rifle.

I only have photos from the seller. Here are a few.
3
Upcoming Musters / Re: 2021 matches in Iowa
« Last post by ira scott on Today at 05:02:44 PM »
Will be nice to see the "cheese heads" again!  Has little Micah grown any?

B.N. Scotty
4
The Winchester Model 1876 / Re: Trouble
« Last post by King Medallion on Today at 04:50:38 PM »
Ok, I'll fiddle around with the ammo some more.  Thanks for the help.
5
231 and #5 are the only two I have used, and not in 45 Colt. However, both flowed extremely well in my Dillon 550.
6
The Winchester Model 1873 / Re: Miroku '73 Question
« Last post by DeaconKC on Today at 04:08:32 PM »
Alliant's website lists the following max loads of 7.5 grains of Bullseye for 200 grain RNFP and 7 grains for 250 RNFP.
http://www.alliantpowder.com/reloaders/powderlist.aspx?page=/reloaders/powderlist.aspx&type=1&powderid=1&cartridge=36
7
The Darksider's Den / Re: Anybody make reloadable .46 rimfire cases?
« Last post by Galloway on Today at 03:56:28 PM »
I'd love to see a pic of the rifle.
8
Upcoming Musters / Re: 2021 matches in Iowa
« Last post by Silver Creek Slim on Today at 03:44:37 PM »
Micah, Sackett and I will be at both. Sackett won't be shooting in April, maybe in Oct.
BTW, what is the cost of these shoots?

Slim
9
NCOWS / Re: Joining NCOWS
« Last post by Silver Creek Slim on Today at 03:37:37 PM »
Welcome.

Slim
10
The Winchester Model 1876 / Re: Trouble
« Last post by Black River Smith on Today at 03:03:34 PM »
Is the slot supposed to be there? Looking at the 45/75, it has a slot too.

Yes, the slot is the guide for the bolts' cartridge lip or rim tab (that little lip on the bottom of the bolt) rides in it, to get the cartridge lined up to the chamber.  They are on all of Winchester toggle link cartridge lifters.

PS.  Checked my Chaparral and the distance between 'top of lifter to the bottom of the slot' is 1.024".  My 45/60 casing feed with ease.  My belief and intent with Win toggles -- is to stay with originally designed or modern produced - original looking bullet shapes.
The tapered shape of a semi-wadcutter bullet could and has (in my case) led to the leading guide ring catching the chamber mouth.  Original designed 'cone shaped' bullets allow the 'riding in and up' of the bullet and casing.
Pages: [1] 2 3 4 5 6 ... 10
SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com