Author Topic: Nickel Plating Backstrap and Trigger Guard  (Read 1438 times)

Online Niederlander

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 3099
  • Liked:
  • Likes Given: 6
Nickel Plating Backstrap and Trigger Guard
« on: November 08, 2022, 07:29:07 AM »
Gentlemen,  Anyone here ever had the backstrap and trigger guard nickel plated to replicate the silver plating of the original Colts?  Why (other than cost) do the replicators not do that to start with?  Is it because most of the originals have all the silver plating worn off?  My guess is, most people buying the first replicas had no idea those parts were ever silver plated.  Did Colt do that all the time, or was it an option?
"There go those Nebraskans, and all hell couldn't stop them!"

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #1 on: November 08, 2022, 10:25:58 AM »

 :)  Naderlander  ;)

Well Heck.  To speculate.  One has to take one's gun apart and send to the parts to be Nickel Plate (DIY is a Nuisance), and while the subject parts are on hiatus one cannot play with one's toy(s), which is also a nuisance.  Generally speaking it's just a pain to have done.  Of course, it does make good sense as pretty guns do shoot better.

In past sample examples, Armi San Marco use to Silver Plate the back strap on their conversions (not all) which looked really good.  Because of that, they shot really well too.  Along with that, Pietta offers an 1862 NYMP Percussion gun with a snazzy Nickel Plate back strap.  Even has a nifty lanyard ring.

Now, in all honesty, I have no clue how many, why, if, when, etc., Colt were shipped with Silver Plate back straps.  Never cared.  Not my cuppa coco.  Still don't care.  I have from time to time, been tempted to ship off a back strap or two for Nickel Plate but as mentioned above, I wouldn't be able to play with that particular toy, so skipped it.  Oh Well

Remember:  People Are Still Hazardous To Yer Health.  Avoidance

Offline St. George

  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 4827
  • NCOWS , GAF, B.O.L.D., Order of St. George, SOCOM,
  • Liked:
  • Likes Given: 0
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #2 on: November 08, 2022, 11:28:07 AM »
The early Navy Colts were treble silver-plated, but after the military geared up, that dropped quickly in order to fill contracts.

The 2d Generation Navy was also treble silver-plated - though if it darkened, it looked blued (I got mine because of that happy fact leading the seller to think it was just another Italian repro- Simichrome and a Selvyt Cloth fixed it).

For 'my' money, silver plating is the way to replicate that look and any good jeweler can do it - nickel looks like chrome.

Vaya,

Scouts Out!
"It Wasn't Cowboys and Ponies - It Was Horses and Men.
It Wasn't Schoolboys and Ladies - It Was Cowtowns and Sin..."

Advertising

  • Guest
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #3 on: Today at 06:13:14 PM »

Offline Graveyard Jack

  • Top Active Citizen
  • *
  • Posts: 668
  • aka CraigC
    • Graveyard Jack's Custom Sixgun Leather
  • SASS #: 81,827
  • Liked:
  • Likes Given: 88
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #3 on: November 08, 2022, 11:33:48 AM »
Nickle does not look like chrome. Chrome has a very cold, bluish tint, more similar to stainless. Nickel has a similar warm bronze hue to white gold. This picture illustrates.

SASS #81,827

Offline Montana Slim

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1940
  • Liked:
  • Likes Given: 101
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #4 on: November 13, 2022, 06:26:53 PM »
I've recommended the Caswell kits on one of the forums... & recall a couple cowboys tried, and were pleased with the results.

Regards,
Slim
Western Reenacting                 Dark Lord of Soot
Live Action Shooting                 Pistoleer Extrordinaire
Firearms Consultant                  Gun Cleaning Specialist
NCOWS Life Member                 NRA Life Member

Online Niederlander

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 3099
  • Liked:
  • Likes Given: 6
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #5 on: November 13, 2022, 06:42:21 PM »
Did you use the brush on kit?  Nickel or silver?
"There go those Nebraskans, and all hell couldn't stop them!"

Offline Montana Slim

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1940
  • Liked:
  • Likes Given: 101
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #6 on: November 13, 2022, 08:10:31 PM »
Yeah, the brush-on kit. IMO, silver is the way to go. Could be some photos in a post (somewhere) on the site.
Western Reenacting                 Dark Lord of Soot
Live Action Shooting                 Pistoleer Extrordinaire
Firearms Consultant                  Gun Cleaning Specialist
NCOWS Life Member                 NRA Life Member

Online Niederlander

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 3099
  • Liked:
  • Likes Given: 6
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #7 on: November 14, 2022, 08:59:49 AM »
Nickle does not look like chrome. Chrome has a very cold, bluish tint, more similar to stainless. Nickel has a similar warm bronze hue to white gold. This picture illustrates.


I really like that finish on the Ruger!
"There go those Nebraskans, and all hell couldn't stop them!"

Offline Graveyard Jack

  • Top Active Citizen
  • *
  • Posts: 668
  • aka CraigC
    • Graveyard Jack's Custom Sixgun Leather
  • SASS #: 81,827
  • Liked:
  • Likes Given: 88
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #8 on: November 14, 2022, 10:48:30 AM »
Thanks! That's hard chrome on the Ruger, matte nickel on the USFA.

Because of this thread, I put out some feelers on doing silver plating. For some reason, the color and soft luster really appeals to me. I was quoted $1200. Considering it's a precious metal, I didn't think that was too out of line. A good nickel job will probably run $400.
SASS #81,827

Offline AntiqueSledMan

  • Very Active Citizen
  • *
  • Posts: 81
  • Liked:
  • Likes Given: 40
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #9 on: November 15, 2022, 04:08:14 AM »
There was a gentleman on the 1858 Remington Forum who Nickle Plated his 1858.
Of course the forum is dead now, but I did make a copy his post.
My comments are in orange text.

AntiqueSledMan.

Offline RRio

  • Arizona Six-Gun
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 2009
  • Six-Gun Specialist
  • SASS #: 22927
  • NCOWS #: 2492
  • GAF #: 267
  • Liked:
  • Likes Given: 469
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #10 on: February 07, 2023, 02:09:14 AM »
:)  Naderlander  ;)

Well Heck.  To speculate.  One has to take one's gun apart and send to the parts to be Nickel Plate (DIY is a Nuisance), and while the subject parts are on hiatus one cannot play with one's toy(s), which is also a nuisance.

....And one just can stand that.   :o
"I hate rude behavior in a man. I won't tolerate it"  - Capt. Woodrow Call

"Proud citizen of CasCity since 2004." 
NCOWS 2492  SASS 22927   SCORRS     USFACS #28       GAF #267 Dept. of the Platte  AZ        STORM #178

Offline Roosterman

  • Top Active Citizen
  • *
  • Posts: 568
    • Muzzleloading guns
  • Liked:
  • Likes Given: 96
Re: Nickel Plating Backstrap and Trigger Guard
« Reply #11 on: February 21, 2023, 12:41:33 PM »
Thanks! That's hard chrome on the Ruger, matte nickel on the USFA.

Because of this thread, I put out some feelers on doing silver plating. For some reason, the color and soft luster really appeals to me. I was quoted $1200. Considering it's a precious metal, I didn't think that was too out of line. A good nickel job will probably run $400.
I'd be doing the silver. You only go around once.
www.fowlingguns.com
Known to run with scissors from time to time
Citadel of Sin Social Club

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com