Author Topic: 1948 Marlin 336A, 30-30 with "JM" barrel  (Read 3062 times)

Offline Trooper Joe

  • Trooper Joe
  • Citizen
  • *
  • Posts: 8
  • Liked:
  • Likes Given: 1
1948 Marlin 336A, 30-30 with "JM" barrel
« on: December 01, 2019, 07:21:53 PM »
Just found this really nice Marlin 336A 30-30 made in 1948 which I believe was the first year for the 336 models.  Has a 24" "JM" stamped barrel, and a waffle top (no screw holes).







Sometime in it's 71 year life span, a prior owner had installed the dreaded side mount scope mount.  Ironically, the scope was only an old Weaver 2.5x rim fire scope which was very cloudy.  Walked past this for several days before I woke up the other day and decided to save this great rifle from extinction.  The dealer made me a good deal so the gun came home with me.

I decided against doing anything to repair the damage (like welding up the holes and rebluing, etc.) other that to remove that scope assembly and plug the holes with some nice plugs from Brownells as soon as I can figure out the thread size.  After all, these side mounts were sort of "period correct" accessories so the old girl will wear the plugged holes as a sort of "badge of honor".



Can't really figure out what the deal was on a 2.5x rimfire scope.



Sat holding it last night wondering how many deer it has taken in the Michigan woods since 1948.

Repairs made on my 336A

Lucked and found a whole pack of 8-40 screw hole plugs brand new.  The one in front of the ejector stud hole had to be ground down a little since it was interfering with the installation of the ejector. (Don't drink two beers before trying to grind that little puppy down.  Can't believe I didn't lose it.)



At least no one drilled holes in the waffle top during the last 71 years.  Also, it was nice that no sling mounts were screwed into the stock or "tack welded" onto the magazine tube.







Is this the correct butt plate for a 1948 336A?



Thanks for all the info and advice.  By the way, the scope is an  El Paso J-2.5 model Weaver scope as identified by a gent on another forum.

Trooper Joe
Trooper Joe

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #1 on: December 02, 2019, 04:36:15 PM »

Swell Jammies    ::)

Offline Coal Creek Griff

  • Top Active Citizen
  • *
  • Posts: 2078
  • Liked:
  • Likes Given: 633
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #2 on: December 02, 2019, 04:45:01 PM »
Swell Jammies    ::)

OK, that made me laugh.  Trooper Joe writes up a great review of his new old gun with lots of pictures and details and you comment on his clothing.  That's funny.  (On the other hand, I was going to comment on his books.)

Trooper, that's a great gun and I think you did well.

CC Griff
Manager, WT Ranch--Coal Creek Division

BOLD #921
BOSS #196
1860 Henry Rifle Shooter #173
SSS #573

Advertising

  • Guest
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #3 on: Today at 04:54:45 PM »

Offline Trooper Joe

  • Trooper Joe
  • Citizen
  • *
  • Posts: 8
  • Liked:
  • Likes Given: 1
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #3 on: December 03, 2019, 05:50:36 AM »
Just corrected my original post from "wondering how many dear it has taken in the Michigan woods" to "wondering how many deer it has taken in the Michigan woods".

Guess I am so used to saying "yes dear" that it caused me to make a typo.  ::).

Thanks for the comments gang.

Trooper Joe
Trooper Joe

Offline boilerplatejackson

  • Master Tailor
  • Very Active Citizen
  • *
  • Posts: 96
  • Mastor Tailor
  • Liked:
  • Likes Given: 0
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #4 on: December 10, 2019, 01:05:17 AM »
That is a great find, and still has years of service left. The 24 inch is a great barrel length to get a little more speed out of the 30/30 cartridge. Ballard rifling to boot I own a Model 45 JC Higgens which dates from 1960 that I have been having a lot of fun shooting cast bullets in.  The rifle likes .312 cast bullets gas checked to .311. Yes please don't do anything to the waffle top, as they are a unique piece of history. The factory drilled and tapped the back left side of your receiver for a Williams sight.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15831
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 415
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #5 on: December 10, 2019, 03:09:20 AM »
Great score on the Old Marlin .... 1948 was indeed my 1st. year of manufacture.  nearing 72 years young....


Oh ! + 1 on the Pj's  ;)

 
when planets align...do the deal !

Offline Sir Charles deMouton-Black

  • THE ANCIENT SUBSTANCE ENDURES - ALL LESSER PROPELLANTS SHALL FIZZLE
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 6199
  • Liked:
  • Likes Given: 396
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #6 on: December 10, 2019, 10:16:37 AM »
A very common scope tube dimension in those days was 7/8". The first centrefire rifle I ever shot was a sporterized Mauser '95, with a 7/8" scope in a sidemount just like that.

7 X 57  is still my favorite caliber.
NCOWS #1154, SCORRS, STORM, BROW, 1860 Henry, Dirty Rat 502, CHINOOK COUNTRY
THE SUBLYME & HOLY ORDER OF THE SOOT (SHOTS)
Those who are no longer ignorant of History may relive it,
without the Blood, Sweat, and Tears.
With apologies to George Santayana & W. S. Churchill

"As Mark Twain once put it, “History doesn’t repeat itself, but it does rhyme.”

Offline Darto

  • Top Active Citizen
  • *
  • Posts: 135
  • Step right up the wooden board on the wall !
  • Liked:
  • Likes Given: 12
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #7 on: June 19, 2020, 02:26:05 PM »
I never knew early Marlins were not drilled. I have a made in '50s Marlin Texan (scoped). Even without the scope it is thicker/heavier than a dainty Win 94 and therefore I don't like carrying it as much through the forest. But JM's are great for older people which need a glass eye.

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #8 on: June 20, 2020, 08:17:54 AM »

 :(  What??  WHAT??   ;)

WHAT "Older" people.  I'll have you know I resemble that.  Glass Eye indeed.  Harrumpff!!

Hide and Watch

Offline Dave T

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1058
  • Liked:
  • Likes Given: 901
Re: 1948 Marlin 336A, 30-30 with "JM" barrel
« Reply #9 on: June 20, 2020, 10:36:33 AM »
Like Major 2, that would be a "birth year rifle" for me. If I ran across one of that vintage I might be very tempted, and I have no use for a 30 WCF. (smile)

Dave

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com